在 2017-08-12 12:04，Chen-Yu Tsai 写道：
On Sat, Jul 22, 2017 at 11:00 AM, <icenowy@xxxxxxx> wrote:
在 2017-05-29 15:34，Chen-Yu Tsai 写道：
Hi,
On Sat, May 27, 2017 at 06:23:06PM +0800, Icenowy Zheng wrote:
[...]
+
+/*
+ * For the special bit in gate part, please see the BSP source code
at
+ *
https://github.com/BPI-SINOVOIP/BPI-M2U-bsp/blob/master/linux-sunxi/drivers/clk/sunxi/clk-sun8iw11.c#L665
+ */
+static SUNXI_CCU_NKM_WITH_GATE_LOCK(pll_sata_clk, "pll-sata",
+ "osc24M", 0x034,
+ 8, 5, /* N */
+ 4, 2, /* K */
+ 0, 2, /* M */
+ BIT(31) | BIT(14), /* gate */
+ BIT(28), /* lock */
+ 0);
I think this is a somewhat simplified approach. From what I
understand
of the user manual, the SATA clock path look like:
[ PLL-PERIPH0-SATA ] -\
mux @ 0x34 bit 30 --- gate @ 0x34 bit 14 ---
...
[ PLL-SATA ] ---------/
... from above ... ------\
mux @ 0xc8 bit 24 --- gate @ 0xc8 bit 31
[ external oscillator ] -/
If you choose to simplify the implementation, please include a
detailed
note as to why you chose to do so, and the validity of the
simplification.
I think it can be fully implemented...
But how should I call the internal clock controlled by the mux @ 0x34
bit
30?
sata-pll-mux?
I choose to call it pll-sata-out, as the mux @ 0x34 bit 30 is called
"PLL_OUTPUT_SEL".
ChenYu
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
