Use resource managed variants of irq_alloc_generic_chip() and irq_setup_generic_chip(). Signed-off-by: Bartosz Golaszewski <brgl@xxxxxxxx> --- drivers/gpio/gpio-sta2x11.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/gpio-sta2x11.c b/drivers/gpio/gpio-sta2x11.c index 9e705162da8d..a16c1c4f92a7 100644 --- a/drivers/gpio/gpio-sta2x11.c +++ b/drivers/gpio/gpio-sta2x11.c @@ -324,9 +324,11 @@ static int gsta_alloc_irq_chip(struct gsta_gpio *chip) { struct irq_chip_generic *gc; struct irq_chip_type *ct; + int rv; - gc = irq_alloc_generic_chip(KBUILD_MODNAME, 1, chip->irq_base, - chip->reg_base, handle_simple_irq); + gc = devm_irq_alloc_generic_chip(chip->dev, KBUILD_MODNAME, 1, + chip->irq_base, + chip->reg_base, handle_simple_irq); if (!gc) return -ENOMEM; @@ -338,8 +340,11 @@ static int gsta_alloc_irq_chip(struct gsta_gpio *chip) ct->chip.irq_enable = gsta_irq_enable; /* FIXME: this makes at most 32 interrupts. Request 0 by now */ - irq_setup_generic_chip(gc, 0 /* IRQ_MSK(GSTA_GPIO_PER_BLOCK) */, 0, - IRQ_NOREQUEST | IRQ_NOPROBE, 0); + rv = devm_irq_setup_generic_chip(chip->dev, gc, + 0 /* IRQ_MSK(GSTA_GPIO_PER_BLOCK) */, + 0, IRQ_NOREQUEST | IRQ_NOPROBE, 0); + if (rv) + return rv; /* Set up all all 128 interrupts: code from setup_generic_chip */ { -- 2.13.2 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html