Re: [PATCH v2] ARM: dts: armadillo800eva: Split LCD mux and gpio

[Simon Horman <horms@xxxxxxxxxxxx>]

On Fri, Jun 02, 2017 at 08:53:26AM +0300, Laurent Pinchart wrote:
> Hi Geert,
> 
> Thank you for the patch.
> 
> On Thursday 01 Jun 2017 12:27:00 Geert Uytterhoeven wrote:
> > Configuration of the lcd0 pinmux group and GPIO hog for the external
> > GPIO mux are done using a single device node, causing the "output-high"
> > property to be applied to both.  This will fail for the pinmux group,
> > but doesn't cause any harm, as the failure is ignored silently.
> > 
> > However, after "pinctrl: sh-pfc: propagate errors on group config", the
> > failure will become fatal, leading to a broken display:
> > 
> >     sh-pfc e6050000.pin-controller: pin_config_group_set op failed for group
> > 102 sh-pfc e6050000.pin-controller: Error applying setting, reverse things
> > back sh-pfc e6050000.pin-controller: failed to select default state
> > 
> > Move the GPIO hog to its own node to fix this.
> > 
> > Fixes: ffd2f9a5afb730b9 ("ARM: shmobile: armadillo800eva dts: Add pinctrl
> > and gpio-hog for lcdc0") Signed-off-by: Geert Uytterhoeven
> > <geert+renesas@xxxxxxxxx>
> > ---
> > This is a hard dependency for "pinctrl: sh-pfc: propagate errors on
> > group config" (https://patchwork.kernel.org/patch/9186713/).
> > 
> > v2:
> >   - Keep the GPIO hog, but move it to its own node, instead of using
> >     another level of subnodes.  As the GPIO hog node is not referenced from
> >     a pinctrl-0 property, pinconf doesn't fail with "No pin or group
> >     provided in DT node".
> 
> I like this approach better, it allows us to drive the output instead of 
> pulling it up, without requiring a full implementation of output drive control 
> in the pfc driver.
> 
> Acked-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>

Thanks, I have queued this up as a fix for v4.12.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html