Re: [PATCH 5/8] gpio: exar: Fix reading of directions and values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2017-05-13 15:36, Andy Shevchenko wrote:
> On Sat, May 13, 2017 at 10:29 AM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote:
>> First, the logic for translating a register bit to the return code of
>> exar_get_direction and exar_get_value were wrong. And second, there was
>> a flip regarding the register bank in exar_get_direction.
> 
> Again, I wish it was tested in the first place.
> 
> After addressing below:
> FWIW:
> Reviewed-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> 
>> @@ -68,7 +68,7 @@ static int exar_get(struct gpio_chip *chip, unsigned int reg)
>>         value = readb(exar_gpio->regs + reg);
>>         mutex_unlock(&exar_gpio->lock);
>>
>> -       return !!value;
>> +       return value;
> 
> This one is correct.
> 
>> @@ -80,7 +80,7 @@ static int exar_get_direction(struct gpio_chip *chip, unsigned int offset)
>>         addr = bank ? EXAR_OFFSET_MPIOSEL_HI : EXAR_OFFSET_MPIOSEL_LO;
>>         val = exar_get(chip, addr) >> (offset % 8);
>>
>> -       return !!val;
>> +       return val & 1;
> 
> It should be rather
> 
>         val = exar_get(chip, addr) & BIT(offset % 8);

That won't give us 0 or 1 as return value, thus would be incorrect.

> 
>>  }
>>
>>  static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
>> @@ -89,10 +89,10 @@ static int exar_get_value(struct gpio_chip *chip, unsigned int offset)
>>         unsigned int addr;
>>         int val;
>>
>> -       addr = bank ? EXAR_OFFSET_MPIOLVL_LO : EXAR_OFFSET_MPIOLVL_HI;
>> +       addr = bank ? EXAR_OFFSET_MPIOLVL_HI : EXAR_OFFSET_MPIOLVL_LO;
> 
> Good catch!
> 
>>         val = exar_get(chip, addr) >> (offset % 8);
>>
>> -       return !!val;
>> +       return val & 1;
> 
> Ditto (see above).
> 

Same here.

Jan

-- 
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux