Re: [PATCH 8/8] serial: exar: Add support for IOT2040 device

[Jan Kiszka <jan.kiszka@xxxxxxxxxxx>]

On 2017-05-13 15:54, Andy Shevchenko wrote:
> On Sat, May 13, 2017 at 10:29 AM, Jan Kiszka <jan.kiszka@xxxxxxxxxxx> wrote:
>> This implements the setup of RS232 and the switch-over to RS485 or RS422
>> for the Siemens IOT2040. That uses an EXAR XR17V352 with external logic
>> to switch between the different modes. The external logic is controlled
>> via MPIO pins of the EXAR controller.
>>
>> Only pin 10 can be exported as GPIO on the IOT2040. It is connected to
>> an LED.
>>
>> As the XR17V352 used on the IOT2040 is not equipped with an external
>> EEPROM, it cannot present itself as IOT2040-variant via subvendor/
>> subdevice IDs. Thus, we have to check via DMI for the target platform.
>>
>> Co-developed with Sascha Weisenberger.
>>
> 
> Please, refactor that using properly formed DMI structrure and use its
> callback and driver data facilities/

Could you point to a specific example? The callback of the dmi_system_id
structure is not designed to handle device initializations like this one
- not to speak of having those two different initialization points here.

Thanks,
Jan

-- 
Siemens AG, Corporate Technology, CT RDA ITP SES-DE
Corporate Competence Center Embedded Linux
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html