Hi Nathan, On Mon, Mar 06, 2017 at 02:06:01PM -0600, Nathan Sullivan wrote: > Support the National Instruments 169445 board. > > Signed-off-by: Nathan Sullivan <nathan.sullivan@xxxxxx> > --- > Documentation/devicetree/bindings/mips/ni.txt | 7 ++ > arch/mips/boot/dts/Makefile | 1 + > arch/mips/boot/dts/ni/169445.dts | 101 ++++++++++++++++++++ > arch/mips/boot/dts/ni/Makefile | 7 ++ > arch/mips/configs/generic/board-ni169445.config | 117 ++++++++++++++++++++++++ > arch/mips/generic/Kconfig | 6 ++ > arch/mips/generic/vmlinux.its.S | 25 +++++ > 7 files changed, 264 insertions(+) > create mode 100644 Documentation/devicetree/bindings/mips/ni.txt > create mode 100644 arch/mips/boot/dts/ni/169445.dts > create mode 100644 arch/mips/boot/dts/ni/Makefile > create mode 100644 arch/mips/configs/generic/board-ni169445.config > nice :) I reckon an entry in MAINTAINERS listing the board specific files/directories would probably be worthwhile too. > diff --git a/arch/mips/configs/generic/board-ni169445.config b/arch/mips/configs/generic/board-ni169445.config > new file mode 100644 > index 0000000..2c950a8 > --- /dev/null > +++ b/arch/mips/configs/generic/board-ni169445.config > @@ -0,0 +1,117 @@ > +CONFIG_MIPS_GENERIC=y > +CONFIG_FIT_IMAGE_FDT_NI169445=y > +CONFIG_CPU_LITTLE_ENDIAN=y > +CONFIG_CPU_MIPS32_R2=y > +CONFIG_HZ_100=y > +CONFIG_MIPS_CMDLINE_FROM_BOOTLOADER=y > +# CONFIG_SWAP is not set > +CONFIG_SYSVIPC=y > +CONFIG_HZ_PERIODIC=y > +CONFIG_NO_HZ=y > +CONFIG_HIGH_RES_TIMERS=y > +CONFIG_IKCONFIG=y > +CONFIG_IKCONFIG_PROC=y > +CONFIG_LOG_BUF_SHIFT=15 > +CONFIG_BPF_SYSCALL=y > +# CONFIG_SHMEM is not set > +CONFIG_USERFAULTFD=y > +CONFIG_EMBEDDED=y > +# CONFIG_COMPAT_BRK is not set > +CONFIG_SLAB=y > +CONFIG_PROFILING=y > +CONFIG_CC_STACKPROTECTOR_REGULAR=y > +# CONFIG_LBDAF is not set > +# CONFIG_BLK_DEV_BSG is not set > +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set > +# CONFIG_SUSPEND is not set > +CONFIG_NET=y > +CONFIG_PACKET=y > +CONFIG_UNIX=y > +CONFIG_INET=y > +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set > +# CONFIG_INET_XFRM_MODE_TUNNEL is not set > +# CONFIG_INET_XFRM_MODE_BEET is not set > +# CONFIG_INET_DIAG is not set > +# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set > +# CONFIG_INET6_XFRM_MODE_TUNNEL is not set > +CONFIG_NETFILTER=y > +CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y > +CONFIG_IP_NF_IPTABLES=y > +CONFIG_IP_NF_FILTER=y > +CONFIG_IP6_NF_IPTABLES=y > +CONFIG_IP6_NF_FILTER=y > +# CONFIG_WIRELESS is not set > +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" > +CONFIG_DEVTMPFS=y > +CONFIG_DEVTMPFS_MOUNT=y > +CONFIG_MTD=y > +CONFIG_MTD_CMDLINE_PARTS=y > +CONFIG_MTD_BLOCK_RO=y > +CONFIG_MTD_NAND=y > +CONFIG_MTD_NAND_ECC_BCH=y > +CONFIG_MTD_NAND_GPIO=y > +CONFIG_MTD_UBI=y > +CONFIG_MTD_UBI_BLOCK=y > +# CONFIG_BLK_DEV is not set > +CONFIG_NETDEVICES=y > +# CONFIG_NET_VENDOR_ALACRITECH is not set > +# CONFIG_NET_VENDOR_AMAZON is not set > +# CONFIG_NET_VENDOR_AQUANTIA is not set > +# CONFIG_NET_VENDOR_ARC is not set > +# CONFIG_NET_CADENCE is not set > +# CONFIG_NET_VENDOR_BROADCOM is not set > +# CONFIG_NET_VENDOR_EZCHIP is not set > +# CONFIG_NET_VENDOR_INTEL is not set > +# CONFIG_NET_VENDOR_MARVELL is not set > +# CONFIG_NET_VENDOR_MICREL is not set > +# CONFIG_NET_VENDOR_NATSEMI is not set > +# CONFIG_NET_VENDOR_NETRONOME is not set > +# CONFIG_NET_VENDOR_QUALCOMM is not set > +# CONFIG_NET_VENDOR_RENESAS is not set > +# CONFIG_NET_VENDOR_ROCKER is not set > +# CONFIG_NET_VENDOR_SAMSUNG is not set > +# CONFIG_NET_VENDOR_SEEQ is not set > +# CONFIG_NET_VENDOR_SOLARFLARE is not set > +# CONFIG_NET_VENDOR_SMSC is not set > +CONFIG_STMMAC_ETH=y > +CONFIG_DWMAC_DWC_QOS_ETH=y > +# CONFIG_NET_VENDOR_VIA is not set > +# CONFIG_NET_VENDOR_WIZNET is not set > +# CONFIG_NET_VENDOR_XILINX is not set > +# CONFIG_WLAN is not set > +# CONFIG_INPUT_KEYBOARD is not set > +# CONFIG_INPUT_MOUSE is not set > +# CONFIG_SERIO is not set > +# CONFIG_VT is not set > +CONFIG_LEGACY_PTY_COUNT=32 > +CONFIG_SERIAL_8250=y > +# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set > +CONFIG_SERIAL_8250_CONSOLE=y > +CONFIG_SERIAL_8250_NR_UARTS=2 > +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 > +CONFIG_SERIAL_OF_PLATFORM=y > +# CONFIG_PTP_1588_CLOCK is not set > +CONFIG_GPIOLIB=y > +CONFIG_GPIO_SYSFS=y > +CONFIG_GPIO_GENERIC_PLATFORM=y > +# CONFIG_HWMON is not set > +# CONFIG_HID is not set > +# CONFIG_USB_SUPPORT is not set > +# CONFIG_MIPS_PLATFORM_DEVICES is not set > +# CONFIG_IOMMU_SUPPORT is not set > +CONFIG_FANOTIFY=y > +CONFIG_UBIFS_FS=y > +CONFIG_SQUASHFS=y > +CONFIG_SQUASHFS_XATTR=y > +# CONFIG_SQUASHFS_ZLIB is not set > +CONFIG_SQUASHFS_LZO=y > +# CONFIG_NETWORK_FILESYSTEMS is not set > +CONFIG_PRINTK_TIME=y > +CONFIG_DEBUG_INFO=y > +CONFIG_DEBUG_INFO_REDUCED=y > +CONFIG_DEBUG_FS=y > +# CONFIG_SCHED_DEBUG is not set > +CONFIG_RCU_TRACE=y > +# CONFIG_FTRACE is not set > +# CONFIG_CRYPTO_ECHAINIV is not set > +# CONFIG_CRYPTO_HW is not set I think this file is intended to be more minimal than a normal defconfig, only enabling hardware device drivers (and related options) and FIT IMAGE on top of the generic_defconfig and other snippets in this directory, e.g. have you seen the other board config examples here? https://git.linux-mips.org/cgit/linux-mti.git/tree/arch/mips/configs/generic?h=eng If specific generic kernel features are desired we should probably consider whether it makes sense to add them to the generic_defconfig so other generic boards can benefit. Cheers James
Attachment:
signature.asc
Description: Digital signature
