Hi David,
On 03/02/2017 03:11 PM, David Wu wrote:
From: "david.wu" <david.wu@xxxxxxxxxxxxxx>
You do not need to add this when you send mail for yourself,
it's need when you send mail for others.
To prevent external signal crosstalk, some pins need to
enable input schmitt, like i2c pins, 32k-input pin and so on.
Signed-off-by: david.wu <david.wu@xxxxxxxxxxxxxx>
Better to use "David Wu" for full name, you can correct this in your
gitconfig file.
Thanks,
- Kever
---
changes in v2:
- check the return value (Heiko)
drivers/pinctrl/pinctrl-rockchip.c | 73 ++++++++++++++++++++++++++++++++++++++
1 file changed, 73 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index a20ce9f..9b8d516 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -308,6 +308,9 @@ struct rockchip_pin_ctrl {
int *reg, u8 *bit);
void (*iomux_recalc)(u8 bank_num, int pin, int *reg,
u8 *bit, int *mask);
+ int (*schmitt_calc_reg)(struct rockchip_pin_bank *bank,
+ int pin_num, struct regmap **regmap,
+ int *reg, u8 *bit);
};
struct rockchip_pin_config {
@@ -1355,6 +1358,57 @@ static int rockchip_set_pull(struct rockchip_pin_bank *bank,
return ret;
}
+static int rockchip_get_schmitt(struct rockchip_pin_bank *bank, int pin_num)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+ struct rockchip_pin_ctrl *ctrl = info->ctrl;
+ struct regmap *regmap;
+ int reg, ret;
+ u8 bit;
+ u32 data;
+
+ ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(regmap, reg, &data);
+ if (ret)
+ return ret;
+
+ data >>= bit;
+ return data & 0x1;
+}
+
+static int rockchip_set_schmitt(struct rockchip_pin_bank *bank,
+ int pin_num, int enable)
+{
+ struct rockchip_pinctrl *info = bank->drvdata;
+ struct rockchip_pin_ctrl *ctrl = info->ctrl;
+ struct regmap *regmap;
+ int reg, ret;
+ unsigned long flags;
+ u8 bit;
+ u32 data, rmask;
+
+ dev_dbg(info->dev, "setting input schmitt of GPIO%d-%d to %d\n",
+ bank->bank_num, pin_num, enable);
+
+ ret = ctrl->schmitt_calc_reg(bank, pin_num, ®map, ®, &bit);
+ if (ret)
+ return ret;
+
+ spin_lock_irqsave(&bank->slock, flags);
+
+ /* enable the write to the equivalent lower bits */
+ data = BIT(bit + 16) | (enable << bit);
+ rmask = BIT(bit + 16) | BIT(bit);
+
+ ret = regmap_update_bits(regmap, reg, rmask, data);
+ spin_unlock_irqrestore(&bank->slock, flags);
+
+ return ret;
+}
+
/*
* Pinmux_ops handling
*/
@@ -1574,6 +1628,15 @@ static int rockchip_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
if (rc < 0)
return rc;
break;
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ if (!info->ctrl->schmitt_calc_reg)
+ return -ENOTSUPP;
+
+ rc = rockchip_set_schmitt(bank,
+ pin - bank->pin_base, arg);
+ if (rc < 0)
+ return rc;
+ break;
default:
return -ENOTSUPP;
break;
@@ -1634,6 +1697,16 @@ static int rockchip_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin,
arg = rc;
break;
+ case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+ if (!info->ctrl->schmitt_calc_reg)
+ return -ENOTSUPP;
+
+ rc = rockchip_get_schmitt(bank, pin - bank->pin_base);
+ if (rc < 0)
+ return rc;
+
+ arg = rc;
+ break;
default:
return -ENOTSUPP;
break;
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html