Re: [PATCH v2 03/12] Document: dt: binding: imx: update clock doc for imx6sll

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 27, 2016 at 05:47:41PM +0800, Bai Ping wrote:
> Add clock binding doc uppdate for imx6sll.

s/uppdate/update/

> 
> Signed-off-by: Bai Ping <ping.bai@xxxxxxx>
> ---
>  .../devicetree/bindings/clock/imx6sll-clock.txt    | 37 ++++++++++++++++++++++
>  1 file changed, 37 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> 
> diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> new file mode 100644
> index 0000000..3a46787
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
> @@ -0,0 +1,37 @@
> +* Clock bindings for Freescale i.MX6 SLL
> +
> +Required properties:
> +- compatible: Should be "fsl,imx6sll-ccm"
> +- reg: Address and length of the register set
> +- #clock-cells: Should be <1>
> +- clocks: list of clock specifiers, must contain an entry for each required
> +  entry in clock-names
> +- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
> +
> +The clock consumer should specify the desired clock by having the clock
> +ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
> +for the full list of i.MX6 SLL clock IDs.
> +
> +Examples:
> +
> +#include <dt-bindings/clock/imx6sll-clock.h>
> +
> +clks: ccm@020c4000 {

Drop leading 0s.

> +		compatible = "fsl,imx6sll-ccm";
> +		reg = <0x020c4000 0x4000>;
> +		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
> +		#clock-cells = <1>;
> +		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
> +		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
> +};
> +
> +uart1: serial@02020000 {

ditto.

> +		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
> +		reg = <0x02020000 0x4000>;
> +		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
> +			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
> +		clock-names = "ipg", "per";
> +		status = "disabled";
> +};
> -- 
> 1.9.1
> 
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux