[PATCH v2 03/12] Document: dt: binding: imx: update clock doc for imx6sll

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Add clock binding doc uppdate for imx6sll.

Signed-off-by: Bai Ping <ping.bai@xxxxxxx>
---
 .../devicetree/bindings/clock/imx6sll-clock.txt    | 37 ++++++++++++++++++++++
 1 file changed, 37 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/imx6sll-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/imx6sll-clock.txt b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
new file mode 100644
index 0000000..3a46787
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx6sll-clock.txt
@@ -0,0 +1,37 @@
+* Clock bindings for Freescale i.MX6 SLL
+
+Required properties:
+- compatible: Should be "fsl,imx6sll-ccm"
+- reg: Address and length of the register set
+- #clock-cells: Should be <1>
+- clocks: list of clock specifiers, must contain an entry for each required
+  entry in clock-names
+- clock-names: should include entries "ckil", "osc", "ipp_di0" and "ipp_di1"
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  See include/dt-bindings/clock/imx6sll-clock.h
+for the full list of i.MX6 SLL clock IDs.
+
+Examples:
+
+#include <dt-bindings/clock/imx6sll-clock.h>
+
+clks: ccm@020c4000 {
+		compatible = "fsl,imx6sll-ccm";
+		reg = <0x020c4000 0x4000>;
+		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+		#clock-cells = <1>;
+		clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>;
+		clock-names = "ckil", "osc", "ipp_di0", "ipp_di1";
+};
+
+uart1: serial@02020000 {
+		compatible = "fsl,imx6sl-uart", "fsl,imx6q-uart", "fsl,imx21-uart";
+		reg = <0x02020000 0x4000>;
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clks IMX6SLL_CLK_UART1_IPG>,
+			 <&clks IMX6SLL_CLK_UART1_SERIAL>;
+		clock-names = "ipg", "per";
+		status = "disabled";
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux