On Thu, Jun 02, 2016 at 10:55:40PM +0100, Dan O'Donovan wrote: > On some CHV platforms, we need an option to configure the > open-drain setting for these pins. This adds support for the > PIN_CONFIG_DRIVE_PUSH_PULL and PIN_CONFIG_DRIVE_OPEN_DRAIN to > disable/enable open-drain mode for a specific pin. > > Signed-off-by: Dan O'Donovan <dan@xxxxxxxxxx> These should come after the locking fix. Looks reasonable to me. -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 2/5] pinctrl: cherryview: add option to set open-drain pin config
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 2/5] pinctrl: cherryview: add option to set open-drain pin config
- From: Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx>
- Date: Mon, 6 Jun 2016 13:32:27 +0300
- In-reply-to: <1464904543-4094-3-git-send-email-dan@emutex.com>
- Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
- User-agent: Mutt/1.6.1 (2016-04-27)
- References:
- [PATCH 0/5] pinctrl: cherryview: fixes and enhancements
- From: Dan O'Donovan
- [PATCH 2/5] pinctrl: cherryview: add option to set open-drain pin config
- From: Dan O'Donovan
- [PATCH 0/5] pinctrl: cherryview: fixes and enhancements
- Prev by Date: Re: [PATCH 4/5] pinctrl: cherryview: prevent concurrent access to GPIO controllers
- Next by Date: Re: [PATCH 5/5] pinctrl: cherryview: restore padctrl1 reg when gpio is disabled
- Previous by thread: [PATCH 2/5] pinctrl: cherryview: add option to set open-drain pin config
- Next by thread: [PATCH 1/5] pinctrl: cherryview: convert bare unsigned to unsigned int
- Index(es):
 |