Re: [RFC 1/8] dt-bindings: mfd: Add Altera Arria10 System Resource Chip bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 18 Apr 2016, Thor Thayer wrote:

> Hi Lee,
> 
> On 04/18/2016 02:45 AM, Lee Jones wrote:
> >On Fri, 15 Apr 2016, Thor Thayer wrote:
> >>On 03/30/2016 06:35 AM, Lee Jones wrote:
> >>>On Tue, 29 Mar 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
> >>>
> >>>>From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> >>>>
> >>>>The Altera Arria10 Devkit System Resource chip is a Multi-Function
> >>>>Device, it has two subdevices:
> >>>>      - GPIO
> >>>>      - HWMON
> >>>>
> >>>>This patch adds documentation for the Altera A10-SR DT bindings.
> >>>>
> >>>>Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
> >>>>---
> >>>>  .../devicetree/bindings/mfd/altera-a10sr.txt       |   35 ++++++++++++++++++++
> >>>>  1 file changed, 35 insertions(+)
> >>>>  create mode 100644 Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> >>>>
> >>>>diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> >>>>new file mode 100644
> >>>>index 0000000..564c761
> >>>>--- /dev/null
> >>>>+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
> >>>>@@ -0,0 +1,35 @@
> >>>>+* Altera Arria10 Development Kit System Resource Chip
> >>>>+
> >>>>+Required parent device properties:
> >>>>+- compatible : "altr,altr_a10sr"
> >>>>+- spi-max-frequency : Maximum SPI frequency.
> >>>>+- reg : the SPI Chip Select address for the Arria10 System Resource chip
> >
> >[...]
> >
> >>>>+		a10sr_hwmon: a10sr_hwmon {
> >>>
> >>>Device type only please.
> >>>
> >>I need to revisit where this will live (hwmon does not seem to be
> >>the correct place) so it will change but I can follow the format
> >>above if it is correct.
> >
> >BTW, "hwmon" is a subsystem in Linux, therefore is a Linuxism and is
> >not allowed in DT.  What does the device *actually* do?
> >
> 
> OK. I'll be careful not to introduce the Linux subsystem name.
> 
> This module indicates whether the power supplies are at the correct
> voltage. It uses a boolean instead of giving an actual voltage value
> as required by HWMON. In other words it is a comparator instead of
> an Analog-to-Digital Converter.
> 
> I could call it a power supply supervisor or voltage status monitor
> but it only acts in a passive role. There is no output to trigger an
> error - only polling, so supervisor doesn't seem like a good name.
> 
> Maybe something like this?
> 
> 	power_supply_status {
> 		compatible = "altr,a10sr-hwmon";
> 	}
> 
> Thanks for reviewing and helping me figure out the device tree naming.

Does it have its own address space?  How complex is the device?  Not
very, by the sounds of it.  In which case, does it really need its own
driver?

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux