Hi Lee,
On 04/18/2016 02:45 AM, Lee Jones wrote:
On Fri, 15 Apr 2016, Thor Thayer wrote:
On 03/30/2016 06:35 AM, Lee Jones wrote:
On Tue, 29 Mar 2016, tthayer@xxxxxxxxxxxxxxxxxxxxx wrote:
From: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
The Altera Arria10 Devkit System Resource chip is a Multi-Function
Device, it has two subdevices:
- GPIO
- HWMON
This patch adds documentation for the Altera A10-SR DT bindings.
Signed-off-by: Thor Thayer <tthayer@xxxxxxxxxxxxxxxxxxxxx>
---
.../devicetree/bindings/mfd/altera-a10sr.txt | 35 ++++++++++++++++++++
1 file changed, 35 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/altera-a10sr.txt
diff --git a/Documentation/devicetree/bindings/mfd/altera-a10sr.txt b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
new file mode 100644
index 0000000..564c761
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/altera-a10sr.txt
@@ -0,0 +1,35 @@
+* Altera Arria10 Development Kit System Resource Chip
+
+Required parent device properties:
+- compatible : "altr,altr_a10sr"
+- spi-max-frequency : Maximum SPI frequency.
+- reg : the SPI Chip Select address for the Arria10 System Resource chip
[...]
+ a10sr_hwmon: a10sr_hwmon {
Device type only please.
I need to revisit where this will live (hwmon does not seem to be
the correct place) so it will change but I can follow the format
above if it is correct.
BTW, "hwmon" is a subsystem in Linux, therefore is a Linuxism and is
not allowed in DT. What does the device *actually* do?
OK. I'll be careful not to introduce the Linux subsystem name.
This module indicates whether the power supplies are at the correct
voltage. It uses a boolean instead of giving an actual voltage value as
required by HWMON. In other words it is a comparator instead of an
Analog-to-Digital Converter.
I could call it a power supply supervisor or voltage status monitor but
it only acts in a passive role. There is no output to trigger an error -
only polling, so supervisor doesn't seem like a good name.
Maybe something like this?
power_supply_status {
compatible = "altr,a10sr-hwmon";
}
Thanks for reviewing and helping me figure out the device tree naming.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
