Thanks Linus. I think the below patch(in fixes branch) should be merged into devel branch too, since the below patch is depended by this one in devel branch. commit 9b8e3ec34318663affced3c14d960e78d760dd9a Author: Yong Li <sdliyong@xxxxxxxxx> Date: Wed Mar 30 14:49:14 2016 +0800 gpio: pca953x: Use correct u16 value for register word write The current implementation only uses the first byte in val, the second byte is always 0. Change it to use cpu_to_le16 to write the two bytes into the register Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Yong Li <sdliyong@xxxxxxxxx> Reviewed-by: Phil Reid <preid@xxxxxxxxxxxxxxxxx> Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> Yong > -----Original Message----- > From: Linus Walleij [mailto:linus.walleij@xxxxxxxxxx] > Sent: Friday, April 08, 2016 21:21 > To: Li, Yong B <yong.b.li@xxxxxxxxx> > Cc: linux-gpio@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx; Alexandre > Courbot <gnurou@xxxxxxxxx>; Andy Shevchenko > <andriy.shevchenko@xxxxxxxxxxxxxxx>; Puustinen, Ismo > <ismo.puustinen@xxxxxxxxx>; Phil Reid <preid@xxxxxxxxxxxxxxxxx> > Subject: Re: [PATCH v2] gpio: pca953x: add PCAL9535 interrupt support for > Galileo Gen2 > > n Thu, Apr 7, 2016 at 6:56 AM, Yong Li <yong.b.li@xxxxxxxxx> wrote: > > > Galileo Gen2 board uses the PCAL9535 as the GPIO expansion, it is > > different from PCA9535 and includes interrupt mask/status registers, > > The current driver does not support the interrupt registers > > configuration, it causes some gpio pins cannot trigger interrupt > > events, this patch fix this issue. The original patch was submitted by > > Josef Ahmad <josef.ahmad@xxxxxxxxxxxxxxx> > > http://git.yoctoproject.org/cgit/cgit.cgi/meta-intel-quark/tree/recipe > > s-kernel/linux/files/0015-Quark-GPIO-1-2-quark.patch > > > > Signed-off-by: Yong Li <yong.b.li@xxxxxxxxx> > > Patch applied with Andy's review tag. > > Yours, > Linus Walleij ��.n��������+%������w��{.n�����{�� b���ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f