Re: [PATCH] pinctrl: sirf/atlas7: stop poking around in GPIO internals

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Thu, Feb 18, 2016 at 3:50 AM, Barry Song <baohua@xxxxxxxxxx> wrote:

> gpiochip_add(chip will call this automatically since range is set in dtsi:
> gpio_0: gpio_mediam@17040000 {
> #gpio-cells = <2>;
> #interrupt-cells = <2>;
> compatible = "sirf,atlas7-gpio";
> reg = <0x17040000 0x1000>;
> interrupts = <0 13 0>, <0 14 0>;
> clocks = <&car 98>;
> clock-names = "gpio0_io";
> gpio-controller;
> interrupt-controller;
>
> gpio-banks = <2>;
> gpio-ranges = <&pinctrl 0 0 0>,
> <&pinctrl 32 0 0>;
> gpio-ranges-group-names = "lvds_gpio_grp",
> "jtag_uart_nand_gpio_grp";

Aha I see.

>> -
>> -               /* Records gpio_pin_range to a7gc */
>> -               list_for_each_entry(pin_range, &chip->pin_ranges, node) {
>> -                       struct pinctrl_gpio_range *range;
>> -
>> -                       range = &pin_range->range;
>> -                       if (range->id == NGPIO_OF_BANK * idx) {
>> -                               bank->gpio_offset = range->id;
>> -                               bank->ngpio = range->npins;
>> -                               bank->gpio_pins = range->pins;
>> -                               bank->pctldev = pin_range->pctldev;
>> -                               break;
>> -                       }
>> -               }
>> -
>> -               BUG_ON(!bank->pctldev);
>
> this doesn't work. my pin range is not continuous and linear, so we
> need the "if (range->id == NGPIO_OF_BANK * idx)" to calculate the
> gpio_offset.
> and gpio_offset is used in many places:

Can't you use:

struct pinctrl_gpio_range *range =
                pinctrl_find_gpio_range_from_pin(pctldev, pin);

In these places instead?

?

That is what most drivers do.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html