On Mon, Feb 15, 2016 at 5:34 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: > On Sat, Feb 13, 2016 at 12:43 AM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: >> On Sat, Feb 13, 2016 at 12:06 AM, Vishnu Patekar >> <vishnupatekar0510@xxxxxxxxx> wrote: >>> Hello Wens, >>> >>> >>> On Tue, Feb 2, 2016 at 2:44 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote: >>>> On Sun, Jan 31, 2016 at 9:21 AM, Vishnu Patekar >>>> <vishnupatekar0510@xxxxxxxxx> wrote: >>>>> This adds A83T PRCM related clocks, clock resets. >>>>> >>>>> As a83t apb0 gates clock support is added earlier, this enables it. >>>>> Apart from apb0 gates, other added clocks are compatible with >>>>> earlier sun8i socs. >>>>> >>>>> Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx> >>>>> --- >>>>> arch/arm/boot/dts/sun8i-a83t.dtsi | 44 +++++++++++++++++++++++++++++++++++++++ >>>>> 1 file changed, 44 insertions(+) >>>>> >>>>> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi >>>>> index ac96aa1..5ea20ff 100644 >>>>> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi >>>>> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi >>>>> @@ -268,6 +268,44 @@ >>>>> "mmc2_output", >>>>> "mmc2_sample"; >>>>> }; >>>>> + >>>>> + cpus_clk: clk@01f01400 { >>>>> + compatible = "allwinner,sun9i-a80-cpus-clk"; >>>>> + reg = <0x01f01400 0x4>; >>>>> + #clock-cells = <0>; >>>>> + clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&osc16M>; >>>>> + clock-output-names = "cpus"; >>>>> + }; >>>>> + >>>>> + ahb0: ahb0_clk { >>>>> + compatible = "fixed-factor-clock"; >>>>> + #clock-cells = <0>; >>>>> + clock-div = <1>; >>>>> + clock-mult = <1>; >>>>> + clocks = <&cpus_clk>; >>>>> + clock-output-names = "ahb0"; >>>>> + }; >>>>> + >>>>> + apb0: clk@01f0140c { >>>>> + compatible = "allwinner,sun8i-a23-apb0-clk"; >>>> >>>> This is actually wrong, as it is wrong in sun9i-a80.dtsi. >>>> I've sent a patch series for it. >>> A83T apb0 is different from A80, and it's same as A23, so this should >>> be correct. >>> Please correct me in case I'm missing something. >> >> My user manual (v1.5.1) says A83T apb0 dividers (page. 246) are >> /1, /2, /3, /4, while the A23 is /1, /2, /4, /8. > > As Vishnu pointed out on IRC, the A23 driver is wrong. They are in fact, > both one-based dividers. I'll send a patch to fix this. ^^^ zero-based And for this patch, Acked-by: Chen-Yu Tsai <wens@xxxxxxxx> > > ChenYu > >> ChenYu >> >>>> Also the drivers for "allwinner,sun9i-a80-cpus-clk" and >>>> "allwinner,sun9i-a80-apbs-clk" >>>> are only compiled for CONFIG_MACH_SUN9I. Please add a patch to address this. >>> Okie. >>>> >>>> Regards >>>> ChenYu >>>> >>>>> + reg = <0x01f0140c 0x4>; >>>>> + #clock-cells = <0>; >>>>> + clocks = <&ahb0>; >>>>> + clock-output-names = "apb0"; >>>>> + }; >>>>> + >>>>> + apb0_gates: clk@01f01428 { >>>>> + compatible = "allwinner,sun8i-a83t-apb0-gates-clk"; >>>>> + reg = <0x01f01428 0x4>; >>>>> + #clock-cells = <1>; >>>>> + clocks = <&apb0>; >>>>> + clock-indices = <0>, <1>, >>>>> + <2>, <3>, >>>>> + <4>, <6>, <7>; >>>>> + clock-output-names = "apb0_pio", "apb0_ir", >>>>> + "apb0_timer", "apb0_rsb", >>>>> + "apb0_uart", "apb0_i2c0", "apb0_twd"; >>>>> + }; >>>>> }; >>>>> >>>>> soc { >>>>> @@ -434,5 +472,11 @@ >>>>> #interrupt-cells = <3>; >>>>> interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>; >>>>> }; >>>>> + >>>>> + apb0_reset: reset@01f014b0 { >>>>> + reg = <0x01f014b0 0x4>; >>>>> + compatible = "allwinner,sun6i-a31-clock-reset"; >>>>> + #reset-cells = <1>; >>>>> + }; >>>>> }; >>>>> }; >>>>> -- >>>>> 1.9.1 >>>>> -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html