Re: [PATCH 10/14] ARM: dts: sun8i-a83t: Add PRCM related clocks and resets

[Chen-Yu Tsai <wens@xxxxxxxx>]

On Sat, Feb 13, 2016 at 12:06 AM, Vishnu Patekar
<vishnupatekar0510@xxxxxxxxx> wrote:
> Hello Wens,
>
>
> On Tue, Feb 2, 2016 at 2:44 PM, Chen-Yu Tsai <wens@xxxxxxxx> wrote:
>> On Sun, Jan 31, 2016 at 9:21 AM, Vishnu Patekar
>> <vishnupatekar0510@xxxxxxxxx> wrote:
>>> This adds A83T PRCM related clocks, clock resets.
>>>
>>> As a83t apb0 gates clock support is added earlier, this enables it.
>>> Apart from apb0 gates, other added clocks are compatible with
>>> earlier sun8i socs.
>>>
>>> Signed-off-by: Vishnu Patekar <vishnupatekar0510@xxxxxxxxx>
>>> ---
>>>  arch/arm/boot/dts/sun8i-a83t.dtsi | 44 +++++++++++++++++++++++++++++++++++++++
>>>  1 file changed, 44 insertions(+)
>>>
>>> diff --git a/arch/arm/boot/dts/sun8i-a83t.dtsi b/arch/arm/boot/dts/sun8i-a83t.dtsi
>>> index ac96aa1..5ea20ff 100644
>>> --- a/arch/arm/boot/dts/sun8i-a83t.dtsi
>>> +++ b/arch/arm/boot/dts/sun8i-a83t.dtsi
>>> @@ -268,6 +268,44 @@
>>>                                              "mmc2_output",
>>>                                              "mmc2_sample";
>>>                 };
>>> +
>>> +               cpus_clk: clk@01f01400 {
>>> +                       compatible = "allwinner,sun9i-a80-cpus-clk";
>>> +                       reg = <0x01f01400 0x4>;
>>> +                       #clock-cells = <0>;
>>> +                       clocks = <&osc16Md512>, <&osc24M>, <&pll6>, <&osc16M>;
>>> +                       clock-output-names = "cpus";
>>> +               };
>>> +
>>> +               ahb0: ahb0_clk {
>>> +                       compatible = "fixed-factor-clock";
>>> +                       #clock-cells = <0>;
>>> +                       clock-div = <1>;
>>> +                       clock-mult = <1>;
>>> +                       clocks = <&cpus_clk>;
>>> +                       clock-output-names = "ahb0";
>>> +               };
>>> +
>>> +               apb0: clk@01f0140c {
>>> +                       compatible = "allwinner,sun8i-a23-apb0-clk";
>>
>> This is actually wrong, as it is wrong in sun9i-a80.dtsi.
>> I've sent a patch series for it.
> A83T apb0 is different from A80, and it's same as A23, so this should
> be correct.
> Please correct me in case I'm missing something.

My user manual (v1.5.1) says A83T apb0 dividers (page. 246) are
/1, /2, /3, /4, while the A23 is /1, /2, /4, /8.

ChenYu

>> Also the drivers for "allwinner,sun9i-a80-cpus-clk" and
>> "allwinner,sun9i-a80-apbs-clk"
>> are only compiled for CONFIG_MACH_SUN9I. Please add a patch to address this.
> Okie.
>>
>> Regards
>> ChenYu
>>
>>> +                       reg = <0x01f0140c 0x4>;
>>> +                       #clock-cells = <0>;
>>> +                       clocks = <&ahb0>;
>>> +                       clock-output-names = "apb0";
>>> +               };
>>> +
>>> +               apb0_gates: clk@01f01428 {
>>> +                       compatible = "allwinner,sun8i-a83t-apb0-gates-clk";
>>> +                       reg = <0x01f01428 0x4>;
>>> +                       #clock-cells = <1>;
>>> +                       clocks = <&apb0>;
>>> +                       clock-indices = <0>, <1>,
>>> +                                       <2>, <3>,
>>> +                                       <4>, <6>, <7>;
>>> +                       clock-output-names = "apb0_pio", "apb0_ir",
>>> +                                       "apb0_timer", "apb0_rsb",
>>> +                                       "apb0_uart", "apb0_i2c0", "apb0_twd";
>>> +               };
>>>         };
>>>
>>>         soc {
>>> @@ -434,5 +472,11 @@
>>>                         #interrupt-cells = <3>;
>>>                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_HIGH)>;
>>>                 };
>>> +
>>> +               apb0_reset: reset@01f014b0 {
>>> +                       reg = <0x01f014b0 0x4>;
>>> +                       compatible = "allwinner,sun6i-a31-clock-reset";
>>> +                       #reset-cells = <1>;
>>> +               };
>>>         };
>>>  };
>>> --
>>> 1.9.1
>>>
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html