Re: [rtc-linux] [PATCH 5/6] rtc: max77620: add support for max77620/max20024 RTC driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 11/01/2016 at 18:47:34 +0530, Laxman Dewangan wrote :
> 
> On Friday 08 January 2016 07:06 PM, Laxman Dewangan wrote:
> >
> >On Friday 08 January 2016 07:06 PM, Mark Brown wrote:
> >>* PGP Signed by an unknown key
> >>
> >>On Fri, Jan 08, 2016 at 06:34:29PM +0530, Laxman Dewangan wrote:
> >>
> >>>If we get the parent device, regmap handle and interrupt number from
> >>>mfd
> >>>core independent of the PMIC (MAX77620 or MAX77686), then same driver
> >>>can be
> >>>used here.
> >>>Two way which I can think of here:
> >>Parent device is just dev->parent, you can use dev_get_regmap() to get a
> >>regmap given a struct device and you can use platform resources to pass
> >>the interrupts to the children from the MFD (there's some examples,
> >>wm831x is one).
> >>
> >>
> >
> >I think it should work with named regmap. mfd whould init regmap with name
> >and rtc driver should ask with same name.
> >
> >I saw three drivers which looks same:
> >rtc-max77620.c (new from me) and already available rtc-max77686.c,
> >rtc-max77802.c
> >
> >Seems I can develop IP based rtc driver as rtc-max77xxx.c
> 
> I came with one of issue when doing this.
> 
> The RTC driver parent is not the same parent for which i2c slave address get
> registered.
> There is two slave address from max77620, 0x3C (for general) and 0x68 for
> RTC.
> 
> In max77620 mfd driver, we make dummy i2c client for 0x68 and initialize
> regmap with this address.
> 
> Now on mfd_add_devices, we pass the device for 0x3c and hence the RTC driver
> treat the parent as the 0x3c device but actually it should be 0x68 to get
> the proper regmap.
> 
> 
> Two approach:
> 1. If we add the option to pass parent_dev when adding cells form
> mfd_add_devices and select the parent device based on this option then it
> can be easily handle.
>     Add parent_dev structure in struct mfd_cell and then change the parent
> in mfd_add_device() if cells has parent device.
> 
> 2. Register the RTC driver with different mfd_add_devices with dummy i2c
> client device.
> So two times mfd_add_devices.
> 
> 
> IMO, approach 1 looks good to me.
> 
> Any opinion?
> 

If the RTC is not at the same address, I'd say this is not an mfd
anymore, can't you probe it directly from DT?


-- 
Alexandre Belloni, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux