On Friday 08 January 2016 07:06 PM, Laxman Dewangan wrote:
On Friday 08 January 2016 07:06 PM, Mark Brown wrote:
* PGP Signed by an unknown key
On Fri, Jan 08, 2016 at 06:34:29PM +0530, Laxman Dewangan wrote:
If we get the parent device, regmap handle and interrupt number from
mfd
core independent of the PMIC (MAX77620 or MAX77686), then same
driver can be
used here.
Two way which I can think of here:
Parent device is just dev->parent, you can use dev_get_regmap() to get a
regmap given a struct device and you can use platform resources to pass
the interrupts to the children from the MFD (there's some examples,
wm831x is one).
I think it should work with named regmap. mfd whould init regmap with
name and rtc driver should ask with same name.
I saw three drivers which looks same:
rtc-max77620.c (new from me) and already available rtc-max77686.c,
rtc-max77802.c
Seems I can develop IP based rtc driver as rtc-max77xxx.c
I came with one of issue when doing this.
The RTC driver parent is not the same parent for which i2c slave address
get registered.
There is two slave address from max77620, 0x3C (for general) and 0x68
for RTC.
In max77620 mfd driver, we make dummy i2c client for 0x68 and initialize
regmap with this address.
Now on mfd_add_devices, we pass the device for 0x3c and hence the RTC
driver treat the parent as the 0x3c device but actually it should be
0x68 to get the proper regmap.
Two approach:
1. If we add the option to pass parent_dev when adding cells form
mfd_add_devices and select the parent device based on this option then
it can be easily handle.
Add parent_dev structure in struct mfd_cell and then change the
parent in mfd_add_device() if cells has parent device.
2. Register the RTC driver with different mfd_add_devices with dummy i2c
client device.
So two times mfd_add_devices.
IMO, approach 1 looks good to me.
Any opinion?
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
