The returned value of cy8c95x0_regmap_read() is used always with a bitmask being applied. Move that bitmasking code into the function. At the same time transform it to cy8c95x0_regmap_read_bits() which will be in align with the write and update counterparts. Signed-off-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-cy8c95x0.c | 45 +++++++++++++++++------------- 1 file changed, 25 insertions(+), 20 deletions(-) diff --git a/drivers/pinctrl/pinctrl-cy8c95x0.c b/drivers/pinctrl/pinctrl-cy8c95x0.c index 851b4b4fd4cb..61225beb0714 100644 --- a/drivers/pinctrl/pinctrl-cy8c95x0.c +++ b/drivers/pinctrl/pinctrl-cy8c95x0.c @@ -574,12 +574,13 @@ static int cy8c95x0_regmap_update_bits(struct cy8c95x0_pinctrl *chip, unsigned i } /** - * cy8c95x0_regmap_read() - reads a register using the regmap cache + * cy8c95x0_regmap_read_bits() - reads a register using the regmap cache * @chip: The pinctrl to work on * @reg: The register to read from. Can be direct access or muxed register. * @port: The port to be used for muxed registers or quick path direct access * registers. Otherwise unused. - * @read_val: Value read from hardware or cache + * @mask: Bitmask to apply + * @val: Value read from hardware or cache * * This function handles the register reads from the direct access registers and * the muxed registers while caching all register accesses, internally handling @@ -589,10 +590,12 @@ static int cy8c95x0_regmap_update_bits(struct cy8c95x0_pinctrl *chip, unsigned i * * Return: 0 for successful request, else a corresponding error value */ -static int cy8c95x0_regmap_read(struct cy8c95x0_pinctrl *chip, unsigned int reg, - unsigned int port, unsigned int *read_val) +static int cy8c95x0_regmap_read_bits(struct cy8c95x0_pinctrl *chip, unsigned int reg, + unsigned int port, unsigned int mask, unsigned int *val) { - int off, ret; + unsigned int off; + unsigned int tmp; + int ret; /* Registers behind the PORTSEL mux have their own range in regmap */ if (cy8c95x0_muxed_register(reg)) { @@ -604,11 +607,14 @@ static int cy8c95x0_regmap_read(struct cy8c95x0_pinctrl *chip, unsigned int reg, else off = reg; } - guard(mutex)(&chip->i2c_lock); - ret = regmap_read(chip->regmap, off, read_val); + scoped_guard(mutex, &chip->i2c_lock) + ret = regmap_read(chip->regmap, off, &tmp); + if (ret) + return ret; - return ret; + *val = tmp & mask; + return 0; } static int cy8c95x0_write_regs_mask(struct cy8c95x0_pinctrl *chip, int reg, @@ -645,7 +651,7 @@ static int cy8c95x0_read_regs_mask(struct cy8c95x0_pinctrl *chip, int reg, DECLARE_BITMAP(tmask, MAX_LINE); DECLARE_BITMAP(tval, MAX_LINE); unsigned long bits, offset; - int read_val; + unsigned int read_val; int ret; /* Add the 4 bit gap of Gport2 */ @@ -655,13 +661,12 @@ static int cy8c95x0_read_regs_mask(struct cy8c95x0_pinctrl *chip, int reg, for_each_set_clump8(offset, bits, tmask, chip->tpin) { unsigned int i = offset / 8; - ret = cy8c95x0_regmap_read(chip, reg, i, &read_val); + ret = cy8c95x0_regmap_read_bits(chip, reg, i, bits, &read_val); if (ret < 0) { dev_err(chip->dev, "failed reading register %d, port %u: err %d\n", reg, i, ret); return ret; } - read_val &= bits; read_val |= bitmap_get_value8(tval, offset) & ~bits; bitmap_set_value8(tval, read_val, offset); } @@ -698,10 +703,10 @@ static int cy8c95x0_gpio_get_value(struct gpio_chip *gc, unsigned int off) struct cy8c95x0_pinctrl *chip = gpiochip_get_data(gc); u8 port = cypress_get_port(chip, off); u8 bit = cypress_get_pin_mask(chip, off); - u32 reg_val; + unsigned int reg_val; int ret; - ret = cy8c95x0_regmap_read(chip, CY8C95X0_INPUT, port, ®_val); + ret = cy8c95x0_regmap_read_bits(chip, CY8C95X0_INPUT, port, bit, ®_val); if (ret < 0) { /* * NOTE: @@ -712,7 +717,7 @@ static int cy8c95x0_gpio_get_value(struct gpio_chip *gc, unsigned int off) return 0; } - return !!(reg_val & bit); + return reg_val ? 1 : 0; } static void cy8c95x0_gpio_set_value(struct gpio_chip *gc, unsigned int off, @@ -730,14 +735,14 @@ static int cy8c95x0_gpio_get_direction(struct gpio_chip *gc, unsigned int off) struct cy8c95x0_pinctrl *chip = gpiochip_get_data(gc); u8 port = cypress_get_port(chip, off); u8 bit = cypress_get_pin_mask(chip, off); - u32 reg_val; + unsigned int reg_val; int ret; - ret = cy8c95x0_regmap_read(chip, CY8C95X0_DIRECTION, port, ®_val); + ret = cy8c95x0_regmap_read_bits(chip, CY8C95X0_DIRECTION, port, bit, ®_val); if (ret < 0) return ret; - if (reg_val & bit) + if (reg_val) return GPIO_LINE_DIRECTION_IN; return GPIO_LINE_DIRECTION_OUT; @@ -750,8 +755,8 @@ static int cy8c95x0_gpio_get_pincfg(struct cy8c95x0_pinctrl *chip, enum pin_config_param param = pinconf_to_config_param(*config); u8 port = cypress_get_port(chip, off); u8 bit = cypress_get_pin_mask(chip, off); + unsigned int reg_val; unsigned int reg; - u32 reg_val; u16 arg = 0; int ret; @@ -808,11 +813,11 @@ static int cy8c95x0_gpio_get_pincfg(struct cy8c95x0_pinctrl *chip, * Writing 1 to one of the drive mode registers will automatically * clear conflicting set bits in the other drive mode registers. */ - ret = cy8c95x0_regmap_read(chip, reg, port, ®_val); + ret = cy8c95x0_regmap_read_bits(chip, reg, port, bit, ®_val); if (ret < 0) return ret; - if (reg_val & bit) + if (reg_val) arg = 1; if (param == PIN_CONFIG_OUTPUT_ENABLE) arg = !arg; -- 2.43.0.rc1.1336.g36b5255a03ac