Re: [PATCH v2 1/5] pinctrl: renesas: rzg2l: Remove RZG2L_TINT_IRQ_START_INDEX

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

Hi Claudiu,

On Wed, Oct 9, 2024 at 10:00 AM claudiu beznea <claudiu.beznea@xxxxxxxxx> wrote:
> On 30.09.2024 17:52, Fabrizio Castro wrote:
> > The RZ/V2H(P) has 16 IRQ interrupts, while every other platforms
> > has 8, and this affects the start index of TINT interrupts
> > (1 + 16 = 17, rather than 1 + 8 = 9).
> > Macro RZG2L_TINT_IRQ_START_INDEX cannot work anymore, replace
> > it with a new member within struct rzg2l_hwcfg.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@xxxxxxxxxxx>
>
> Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Thanks!

> > --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> > +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c

> > @@ -251,6 +250,7 @@ enum rzg2l_iolh_index {
> >   * @func_base: base number for port function (see register PFC)
> >   * @oen_max_pin: the maximum pin number supporting output enable
> >   * @oen_max_port: the maximum port number supporting output enable
> > + * @tint_start_index: the start index for the TINT interrupts
> >   */
> >  struct rzg2l_hwcfg {
> >       const struct rzg2l_register_offsets regs;
> > @@ -262,6 +262,7 @@ struct rzg2l_hwcfg {
> >       u8 func_base;
> >       u8 oen_max_pin;
> >       u8 oen_max_port;
> > +     unsigned int tint_start_index;
>
> Maybe you can use u16 (even u8 is enough at the moment) and add it a bit
> above (if u16 or even if unsigned int) to avoid any padding, if any.

Good catch, I had missed that struct rzg2l_register_offsets is 16-bit
aligned ;-)

I will change it to u16 and move it up while applying.

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds