Re: Re: Re: [PATCH v6 0/5] Initial Support for Linksys EA9350 V3 (linksys-jamaica)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




I found a uboot for ipq5018 qcom reference boards https://git.codelinaro.org/clo/qsdk/oss/boot/u-boot-2016 .Considering my router is quite similar to one of those boards so the uboot should workon EA9350 i think?

Let me compile and try to chainload it from the stock uboot.(Btw I have never tried chainloading on qcom platform but i did try that on amlogic platform.)


U-Boot 2016.01 (Dec 06 2021 - 10:08:47 +0800)

CBT U-Boot ver: 3.2.08  ([IPQ5018].[SPF11.3].[CSU2])

DRAM:  smem ram ptable found: ver: 1 len: 4
512 MiB
NAND:  QPIC controller support serial NAND
ID = 22c822c8
Vendor = c8
Device = 22
Serial Nand Device Found With ID : 0xc8 0x22
Serial NAND device Manufacturer:GD5F2GQ5REYIH
Device Size:256 MiB, Page size:2048, Spare Size:64, ECC:4-bit
SF: Unsupported flash IDs: manuf 00, jedec 0000, ext_jedec 0000
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC:   sdhci: Node Not found, skipping initialization

PCI Link Intialized
PCI1 is not defined in the device tree
In:    serial@78AF000
Out:   serial@78AF000
Err:   serial@78AF000
machid: 8040001
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid

Updating boot_count ... done

Hit any key to stop autoboot:  3  0 

Net:   cmbblk is stable 5
MAC1 addr:0:11:22:33:44:55
athrs17_reg_init: complete
S17c init  done
eth0
Warning: eth0 MAC addresses don't match:
Address in SROM is         00:11:22:33:44:55
Address in environment is  00:03:7f:ba:db:ad

IPQ5018# 

IPQ5018# 

IPQ5018# usb start

starting USB...
USB0:   Register 2000140 NbrPorts 2
Starting the controller
USB XHCI 1.10
scanning bus 0 for devices... 2 USB Device(s) found
IPQ5018# fatload usb 0 ${loadaddr} u-boot.bin

reading u-boot.bin
419816 bytes read in 261 ms (1.5 MiB/s)
IPQ5018# go ${loadaddr}

## Starting application at 0x44000000 ...
prefetch abort
pc : [<44000004>]	   lr : [<4a92891b>]
reloc pc : [<44000004>]	   lr : [<4a92891b>]
sp : 4a822840  ip : 0000001c	 fp : 00000002
r10: 00000000  r9 : 4a822ea0	 r8 : 4a97d300
r7 : 4a9288f1  r6 : 00000002	 r5 : 44000000  r4 : 4a828b74
r3 : 44000000  r2 : 4a828b74	 r1 : 4a828b74  r0 : 00000001
Flags: nzCv  IRQs off  FIQs off  Mode SVC_32
Resetting CPU ...

resetting ...






[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux