Re: [PATCH v2 02/14] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 07, 2024 at 02:39:45PM +0200, Andrea della Porta wrote:
> Add device tree bindings for the gpio/pin/mux controller that is part of
> the RP1 multi function device, and relative entries in MAINTAINERS file.
> 
> Signed-off-by: Andrea della Porta <andrea.porta@xxxxxxxx>
> ---
>  .../pinctrl/raspberrypi,rp1-gpio.yaml         | 169 ++++++++++++++++++
>  MAINTAINERS                                   |   2 +
>  2 files changed, 171 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> new file mode 100644
> index 000000000000..46e071ec6251
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml
> @@ -0,0 +1,169 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/raspberrypi,rp1-gpio.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: RaspberryPi RP1 GPIO/Pinconf/Pinmux Controller submodule
> +
> +maintainers:
> +  - Andrea della Porta <andrea.porta@xxxxxxxx>
> +
> +description:
> +  The RP1 chipset is a Multi Function Device containing, among other sub-peripherals,
> +  a gpio/pinconf/mux controller whose 54 pins are grouped into 3 banks. It works also
> +  as an interrupt controller for those gpios.
> +
> +  Each pin configuration node lists the pin(s) to which it applies, and one or
> +  more of the mux function to select on those pin(s), and their configuration.
> +  The pin configuration and multiplexing supports the generic bindings.
> +  For details on each properties (including the meaning of "pin configuration node"),
> +  you can refer to ./pinctrl-bindings.txt.

Drop the sentence. pinctrl.yaml defines this already.

> +
> +properties:
> +  compatible:
> +    const: raspberrypi,rp1-gpio
> +
> +  reg:
> +    maxItems: 3
> +    description: One reg specifier for each one of the 3 pin banks.
> +
> +  '#gpio-cells':
> +    description: The first cell is the pin number and the second cell is used
> +      to specify the flags (see include/dt-bindings/gpio/gpio.h).
> +    const: 2
> +
> +  gpio-controller: true
> +
> +  gpio-ranges:
> +    maxItems: 1
> +
> +  gpio-line-names:
> +    maxItems: 54
> +
> +  interrupts:
> +    maxItems: 3
> +    description: One interrupt specifier for each one of the 3 pin banks.
> +
> +  '#interrupt-cells':
> +    description:
> +      Specifies the Bank number [0, 1, 2] and Flags as defined in
> +      include/dt-bindings/interrupt-controller/irq.h.
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +additionalProperties:
> +  anyOf:

Uh, no, I think you got comments on this. You should be specific which
nodes you expect, e.g. pins or groups. See other recent bindings for
example.

> +    - type: object
> +      additionalProperties: false
> +      allOf:
> +        - $ref: pincfg-node.yaml#
> +        - $ref: pinmux-node.yaml#
> +
> +      description:
> +        Pin controller client devices use pin configuration subnodes (children
> +        and grandchildren) for desired pin configuration.
> +        Client device subnodes use below standard properties.
> +
> +      properties:
> +        pins:
> +          description:
> +            A string (or list of strings) adhering to the pattern "gpio[0-5][0-9]"
> +        function: true
> +        bias-disable: true
> +        bias-pull-down: true
> +        bias-pull-up: true
> +        slew-rate:
> +          description: 0 is slow slew rate, 1 is fast slew rate
> +          enum: [ 0, 1 ]
> +        drive-strength:
> +          enum: [ 2, 4, 8, 12 ]
> +
> +    - type: object
> +      additionalProperties:
> +        $ref: "#/additionalProperties/anyOf/0"

I don't quite get what you wanted to achieve here.

> +
> +allOf:
> +  - $ref: pinctrl.yaml#
> +
> +required:
> +  - reg
> +  - compatible
> +  - "#gpio-cells"
> +  - gpio-controller
> +  - interrupts
> +  - "#interrupt-cells"
> +  - interrupt-controller
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +
> +    rp1 {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        rp1_gpio: pinctrl@c0400d0000 {
> +            reg = <0xc0 0x400d0000  0x0 0xc000>,
> +                  <0xc0 0x400e0000  0x0 0xc000>,
> +                  <0xc0 0x400f0000  0x0 0xc000>;
> +            compatible = "raspberrypi,rp1-gpio";
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>,
> +                         <1 IRQ_TYPE_LEVEL_HIGH>,
> +                         <2 IRQ_TYPE_LEVEL_HIGH>;
> +            gpio-line-names =
> +                   "ID_SDA", // GPIO0
> +                   "ID_SCL", // GPIO1
> +                   "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6",
> +                   "GPIO7", "GPIO8", "GPIO9", "GPIO10", "GPIO11",
> +                   "GPIO12", "GPIO13", "GPIO14", "GPIO15", "GPIO16",
> +                   "GPIO17", "GPIO18", "GPIO19", "GPIO20", "GPIO21",
> +                   "GPIO22", "GPIO23", "GPIO24", "GPIO25", "GPIO26",
> +                   "GPIO27",
> +                   "PCIE_RP1_WAKE", // GPIO28
> +                   "FAN_TACH", // GPIO29
> +                   "HOST_SDA", // GPIO30
> +                   "HOST_SCL", // GPIO31
> +                   "ETH_RST_N", // GPIO32
> +                   "", // GPIO33
> +                   "CD0_IO0_MICCLK", // GPIO34
> +                   "CD0_IO0_MICDAT0", // GPIO35
> +                   "RP1_PCIE_CLKREQ_N", // GPIO36
> +                   "", // GPIO37
> +                   "CD0_SDA", // GPIO38
> +                   "CD0_SCL", // GPIO39
> +                   "CD1_SDA", // GPIO40
> +                   "CD1_SCL", // GPIO41
> +                   "USB_VBUS_EN", // GPIO42
> +                   "USB_OC_N", // GPIO43
> +                   "RP1_STAT_LED", // GPIO44
> +                   "FAN_PWM", // GPIO45
> +                   "CD1_IO0_MICCLK", // GPIO46
> +                   "2712_WAKE", // GPIO47
> +                   "CD1_IO1_MICDAT1", // GPIO48
> +                   "EN_MAX_USB_CUR", // GPIO49
> +                   "", // GPIO50
> +                   "", // GPIO51
> +                   "", // GPIO52
> +                   ""; // GPIO53
> +
> +            rp1_uart0_14_15: rp1_uart0_14_15 {

Underscores are not allowed in node names. Please read DTS coding style.

Drop unused labels.

> +                pin_txd {
> +                    function = "uart0";
> +                    pins = "gpio14";
> +                    bias-disable;
> +                };

Best regards,
Krzysztof





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux