Re: [PATCH v3 2/5] dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Sep 03, 2024 at 04:33:53PM +0100, Lee Jones wrote:
> On Sat, 31 Aug 2024, Lorenzo Bianconi wrote:
> 
> > From: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > 
> > Add support for Airoha EN7581 GPIO System Controller which provide a
> > register map for controlling the GPIO, pinctrl and PWM of the SoC.
> > 
> > Schema define cells for both gpio/interrupt controller and PWM.
> > Moreover it provides a dedicated pinctrl node for pins and config
> > definitions.
> > 
> > Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> > Co-developed-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> > Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> > ---
> >  .../bindings/mfd/airoha,en7581-gpio-sysctl.yaml    | 433 +++++++++++++++++++++
> >  1 file changed, 433 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
> > new file mode 100644
> > index 000000000000..a9080c7f50f9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
> > @@ -0,0 +1,433 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/mfd/airoha,en7581-gpio-sysctl.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Airoha EN7581 GPIO System Controller
> > +
> > +maintainers:
> > +  - Christian Marangi <ansuelsmth@xxxxxxxxx>
> > +  - Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> > +
> > +description:
> > +  Airoha EN7581 SoC GPIO system controller which provided a register map
> > +  for controlling the GPIO, pins and PWM of the SoC.
> 
> This whole thing is just about pins.
> 
> The MFD portion of this submission doesn't do anything.
>

Hi Lee,

thanks for the review. I think you missed the other series as it was
requested to use MFD implementation due to shared register map.

> Please rework this to omit the MFD driver.

I'm a bit confused by this you mean in the schema? Putting PWM property
in a pinctrl schema looks wrong to me :(

> 
> After just a glance, it looks like simple-mfd _might_ work.

Simple-mfd works if register map are well defined and you can have
something like
- parent define the whole register
- child can user reg property to register offset and subsection of the
  parent register

Here it's all mixed and scrambled and also it was requested to have a
very simple node that include both pwm and pinctrl property (cause that
is how the HW register block is designed and schema must reflect HW)

Hope you can understand these reasons.

> 
> > +properties:
> > +  compatible:
> > +    const: airoha,en7581-gpio-sysctl
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  gpio-controller: true
> > +
> > +  '#gpio-cells':
> > +    const: 2
> > +
> > +  interrupt-controller: true
> > +
> > +  '#interrupt-cells':
> > +    const: 2
> > +
> > +  "#pwm-cells":
> > +    const: 3
> > +
> > +  pinctrl:
> > +    type: object
> > +
> > +    $ref: /schemas/pinctrl/pinctrl.yaml
> > +
> > +    patternProperties:
> > +      '-pins$':
> > +        type: object
> > +
> > +        patternProperties:
> > +          '^.*mux.*$':
> > +            type: object
> > +
> > +            description:
> > +              pinmux configuration nodes.
> > +
> > +            $ref: /schemas/pinctrl/pinmux-node.yaml
> > +
> > +            properties:
> > +              function:
> > +                description:
> > +                  A string containing the name of the function to mux to the group.
> > +                enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi,
> > +                       pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0,
> > +                       phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1,
> > +                       phy3_led1, phy4_led1]
> > +
> > +              groups:
> > +                description:
> > +                  An array of strings. Each string contains the name of a group.
> > +
> > +            required:
> > +              - function
> > +              - groups
> > +
> > +            allOf:
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: pon
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [pon]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: tod_1pps
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [pon_tod_1pps, gsw_tod_1pps]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: sipo
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [sipo, sipo_rclk]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: mdio
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [mdio]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: uart
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      items:
> > +                        enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts, uart4,
> > +                               uart5]
> > +                      maxItems: 2
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: i2c
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [i2c1]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: jtag
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [jtag_udi, jtag_dfd]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: pcm
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [pcm1, pcm2]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: spi
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      items:
> > +                        enum: [spi_quad, spi_cs1]
> > +                      maxItems: 2
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: pcm_spi
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      items:
> > +                        enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1,
> > +                               pcm_spi_cs2_p156, pcm_spi_cs2_p128, pcm_spi_cs3,
> > +                               pcm_spi_cs4]
> > +                      maxItems: 7
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: i2c
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [i2s]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: emmc
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [emmc]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: pnand
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [pnand]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: pcie_reset
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [pcie_reset0, pcie_reset1, pcie_reset2]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: pwm
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
> > +                             gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
> > +                             gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
> > +                             gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
> > +                             gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
> > +                             gpio36, gpio37, gpio38, gpio39, gpio40, gpio41,
> > +                             gpio42, gpio43, gpio44, gpio45, gpio46, gpio47]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy1_led0
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio33, gpio34, gpio35, gpio42]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy2_led0
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio33, gpio34, gpio35, gpio42]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy3_led0
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio33, gpio34, gpio35, gpio42]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy4_led0
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio33, gpio34, gpio35, gpio42]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy1_led1
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio43, gpio44, gpio45, gpio46]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy2_led1
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio43, gpio44, gpio45, gpio46]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy3_led1
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio43, gpio44, gpio45, gpio46]
> > +              - if:
> > +                  properties:
> > +                    function:
> > +                      const: phy4_led1
> > +                then:
> > +                  properties:
> > +                    groups:
> > +                      enum: [gpio43, gpio44, gpio45, gpio46]
> > +
> > +            additionalProperties: false
> > +
> > +          '^.*conf.*$':
> > +            type: object
> > +
> > +            description:
> > +              pinconf configuration nodes.
> > +
> > +            $ref: /schemas/pinctrl/pincfg-node.yaml
> > +
> > +            properties:
> > +              pins:
> > +                description:
> > +                  An array of strings. Each string contains the name of a pin.
> > +                items:
> > +                  enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk,
> > +                         spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4,
> > +                         gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12,
> > +                         gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
> > +                         gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
> > +                         gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
> > +                         gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40,
> > +                         gpio41, gpio42, gpio43, gpio44, gpio45, gpio46,
> > +                         pcie_reset0, pcie_reset1, pcie_reset2]
> > +                minItems: 1
> > +                maxItems: 58
> > +
> > +              bias-disable: true
> > +
> > +              bias-pull-up: true
> > +
> > +              bias-pull-down: true
> > +
> > +              input-enable: true
> > +
> > +              output-enable: true
> > +
> > +              output-low: true
> > +
> > +              output-high: true
> > +
> > +              drive-open-drain: true
> > +
> > +              drive-strength:
> > +                description:
> > +                  Selects the drive strength for MIO pins, in mA.
> > +                enum: [2, 4, 6, 8]
> > +
> > +            required:
> > +              - pins
> > +
> > +            additionalProperties: false
> > +
> > +        additionalProperties: false
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - interrupts
> > +  - gpio-controller
> > +  - "#gpio-cells"
> > +  - "#pwm-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    mfd@1fbf0200 {
> > +        compatible = "airoha,en7581-gpio-sysctl";
> > +        reg = <0x1fbf0200 0xc0>;
> > +
> > +        interrupt-parent = <&gic>;
> > +        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> > +
> > +        gpio-controller;
> > +        #gpio-cells = <2>;
> > +
> > +        interrupt-controller;
> > +        #interrupt-cells = <2>;
> > +
> > +        #pwm-cells = <3>;
> > +
> > +        pinctrl {
> > +            pcie1-rst-pins {
> > +                conf {
> > +                    pins = "pcie_reset1";
> > +                    drive-open-drain = <1>;
> > +                };
> > +            };
> > +
> > +            pwm-pins {
> > +                mux {
> > +                    function = "pwm";
> > +                    groups = "gpio18";
> > +                };
> > +            };
> > +
> > +            spi-pins {
> > +                mux {
> > +                    function = "spi";
> > +                    groups = "spi_quad", "spi_cs1";
> > +                };
> > +            };
> > +
> > +            uart2-pins {
> > +                mux {
> > +                    function = "uart";
> > +                    groups = "uart2", "uart2_cts_rts";
> > +                };
> > +            };
> > +
> > +            uar5-pins {
> > +                mux {
> > +                    function = "uart";
> > +                    groups = "uart5";
> > +                };
> > +            };
> > +
> > +            mmc-pins {
> > +                mux {
> > +                    function = "emmc";
> > +                    groups = "emmc";
> > +                };
> > +            };
> > +
> > +            mdio-pins {
> > +                mux {
> > +                    function = "mdio";
> > +                    groups = "mdio";
> > +                };
> > +
> > +                conf {
> > +                    pins = "gpio2";
> > +                    output-enable;
> > +                };
> > +            };
> > +
> > +            gswp1-led0-pins {
> > +                mux {
> > +                    function = "phy1_led0";
> > +                    groups = "gpio33";
> > +                };
> > +            };
> > +
> > +            gswp2-led1-pins {
> > +                mux {
> > +                    function = "phy2_led1";
> > +                    groups = "gpio44";
> > +                };
> > +            };
> > +        };
> > +    };
> > +
> > +...
> > 
> > -- 
> > 2.46.0
> > 
> 
> -- 
> Lee Jones [李琼斯]

-- 
	Ansuel




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux