Re: [PATCH v3 2/5] dt-bindings: mfd: Add support for Airoha EN7581 GPIO System Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 31 Aug 2024, Lorenzo Bianconi wrote:

> From: Christian Marangi <ansuelsmth@xxxxxxxxx>
> 
> Add support for Airoha EN7581 GPIO System Controller which provide a
> register map for controlling the GPIO, pinctrl and PWM of the SoC.
> 
> Schema define cells for both gpio/interrupt controller and PWM.
> Moreover it provides a dedicated pinctrl node for pins and config
> definitions.
> 
> Signed-off-by: Christian Marangi <ansuelsmth@xxxxxxxxx>
> Co-developed-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> Signed-off-by: Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> ---
>  .../bindings/mfd/airoha,en7581-gpio-sysctl.yaml    | 433 +++++++++++++++++++++
>  1 file changed, 433 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
> new file mode 100644
> index 000000000000..a9080c7f50f9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mfd/airoha,en7581-gpio-sysctl.yaml
> @@ -0,0 +1,433 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mfd/airoha,en7581-gpio-sysctl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Airoha EN7581 GPIO System Controller
> +
> +maintainers:
> +  - Christian Marangi <ansuelsmth@xxxxxxxxx>
> +  - Lorenzo Bianconi <lorenzo@xxxxxxxxxx>
> +
> +description:
> +  Airoha EN7581 SoC GPIO system controller which provided a register map
> +  for controlling the GPIO, pins and PWM of the SoC.

This whole thing is just about pins.

The MFD portion of this submission doesn't do anything.

Please rework this to omit the MFD driver.

After just a glance, it looks like simple-mfd _might_ work.

> +properties:
> +  compatible:
> +    const: airoha,en7581-gpio-sysctl
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +  '#interrupt-cells':
> +    const: 2
> +
> +  "#pwm-cells":
> +    const: 3
> +
> +  pinctrl:
> +    type: object
> +
> +    $ref: /schemas/pinctrl/pinctrl.yaml
> +
> +    patternProperties:
> +      '-pins$':
> +        type: object
> +
> +        patternProperties:
> +          '^.*mux.*$':
> +            type: object
> +
> +            description:
> +              pinmux configuration nodes.
> +
> +            $ref: /schemas/pinctrl/pinmux-node.yaml
> +
> +            properties:
> +              function:
> +                description:
> +                  A string containing the name of the function to mux to the group.
> +                enum: [pon, tod_1pps, sipo, mdio, uart, i2c, jtag, pcm, spi,
> +                       pcm_spi, i2s, emmc, pnand, pcie_reset, pwm, phy1_led0,
> +                       phy2_led0, phy3_led0, phy4_led0, phy1_led1, phy2_led1,
> +                       phy3_led1, phy4_led1]
> +
> +              groups:
> +                description:
> +                  An array of strings. Each string contains the name of a group.
> +
> +            required:
> +              - function
> +              - groups
> +
> +            allOf:
> +              - if:
> +                  properties:
> +                    function:
> +                      const: pon
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [pon]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: tod_1pps
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [pon_tod_1pps, gsw_tod_1pps]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: sipo
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [sipo, sipo_rclk]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: mdio
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [mdio]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: uart
> +                then:
> +                  properties:
> +                    groups:
> +                      items:
> +                        enum: [uart2, uart2_cts_rts, hsuart, hsuart_cts_rts, uart4,
> +                               uart5]
> +                      maxItems: 2
> +              - if:
> +                  properties:
> +                    function:
> +                      const: i2c
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [i2c1]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: jtag
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [jtag_udi, jtag_dfd]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: pcm
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [pcm1, pcm2]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: spi
> +                then:
> +                  properties:
> +                    groups:
> +                      items:
> +                        enum: [spi_quad, spi_cs1]
> +                      maxItems: 2
> +              - if:
> +                  properties:
> +                    function:
> +                      const: pcm_spi
> +                then:
> +                  properties:
> +                    groups:
> +                      items:
> +                        enum: [pcm_spi, pcm_spi_int, pcm_spi_rst, pcm_spi_cs1,
> +                               pcm_spi_cs2_p156, pcm_spi_cs2_p128, pcm_spi_cs3,
> +                               pcm_spi_cs4]
> +                      maxItems: 7
> +              - if:
> +                  properties:
> +                    function:
> +                      const: i2c
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [i2s]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: emmc
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [emmc]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: pnand
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [pnand]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: pcie_reset
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [pcie_reset0, pcie_reset1, pcie_reset2]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: pwm
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6,
> +                             gpio7, gpio8, gpio9, gpio10, gpio11, gpio12, gpio13,
> +                             gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
> +                             gpio20, gpio21, gpio22, gpio23, gpio24, gpio25,
> +                             gpio26, gpio27, gpio28, gpio29, gpio30, gpio31,
> +                             gpio36, gpio37, gpio38, gpio39, gpio40, gpio41,
> +                             gpio42, gpio43, gpio44, gpio45, gpio46, gpio47]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy1_led0
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio33, gpio34, gpio35, gpio42]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy2_led0
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio33, gpio34, gpio35, gpio42]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy3_led0
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio33, gpio34, gpio35, gpio42]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy4_led0
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio33, gpio34, gpio35, gpio42]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy1_led1
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio43, gpio44, gpio45, gpio46]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy2_led1
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio43, gpio44, gpio45, gpio46]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy3_led1
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio43, gpio44, gpio45, gpio46]
> +              - if:
> +                  properties:
> +                    function:
> +                      const: phy4_led1
> +                then:
> +                  properties:
> +                    groups:
> +                      enum: [gpio43, gpio44, gpio45, gpio46]
> +
> +            additionalProperties: false
> +
> +          '^.*conf.*$':
> +            type: object
> +
> +            description:
> +              pinconf configuration nodes.
> +
> +            $ref: /schemas/pinctrl/pincfg-node.yaml
> +
> +            properties:
> +              pins:
> +                description:
> +                  An array of strings. Each string contains the name of a pin.
> +                items:
> +                  enum: [uart1_txd, uart1_rxd, i2c_scl, i2c_sda, spi_cs0, spi_clk,
> +                         spi_mosi, spi_miso, gpio0, gpio1, gpio2, gpio3, gpio4,
> +                         gpio5, gpio6, gpio7, gpio8, gpio9, gpio10, gpio11, gpio12,
> +                         gpio13, gpio14, gpio15, gpio16, gpio17, gpio18, gpio19,
> +                         gpio20, gpio21, gpio22, gpio23, gpio24, gpio25, gpio26,
> +                         gpio27, gpio28, gpio29, gpio30, gpio31, gpio32, gpio33,
> +                         gpio34, gpio35, gpio36, gpio37, gpio38, gpio39, gpio40,
> +                         gpio41, gpio42, gpio43, gpio44, gpio45, gpio46,
> +                         pcie_reset0, pcie_reset1, pcie_reset2]
> +                minItems: 1
> +                maxItems: 58
> +
> +              bias-disable: true
> +
> +              bias-pull-up: true
> +
> +              bias-pull-down: true
> +
> +              input-enable: true
> +
> +              output-enable: true
> +
> +              output-low: true
> +
> +              output-high: true
> +
> +              drive-open-drain: true
> +
> +              drive-strength:
> +                description:
> +                  Selects the drive strength for MIO pins, in mA.
> +                enum: [2, 4, 6, 8]
> +
> +            required:
> +              - pins
> +
> +            additionalProperties: false
> +
> +        additionalProperties: false
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - gpio-controller
> +  - "#gpio-cells"
> +  - "#pwm-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    mfd@1fbf0200 {
> +        compatible = "airoha,en7581-gpio-sysctl";
> +        reg = <0x1fbf0200 0xc0>;
> +
> +        interrupt-parent = <&gic>;
> +        interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> +
> +        gpio-controller;
> +        #gpio-cells = <2>;
> +
> +        interrupt-controller;
> +        #interrupt-cells = <2>;
> +
> +        #pwm-cells = <3>;
> +
> +        pinctrl {
> +            pcie1-rst-pins {
> +                conf {
> +                    pins = "pcie_reset1";
> +                    drive-open-drain = <1>;
> +                };
> +            };
> +
> +            pwm-pins {
> +                mux {
> +                    function = "pwm";
> +                    groups = "gpio18";
> +                };
> +            };
> +
> +            spi-pins {
> +                mux {
> +                    function = "spi";
> +                    groups = "spi_quad", "spi_cs1";
> +                };
> +            };
> +
> +            uart2-pins {
> +                mux {
> +                    function = "uart";
> +                    groups = "uart2", "uart2_cts_rts";
> +                };
> +            };
> +
> +            uar5-pins {
> +                mux {
> +                    function = "uart";
> +                    groups = "uart5";
> +                };
> +            };
> +
> +            mmc-pins {
> +                mux {
> +                    function = "emmc";
> +                    groups = "emmc";
> +                };
> +            };
> +
> +            mdio-pins {
> +                mux {
> +                    function = "mdio";
> +                    groups = "mdio";
> +                };
> +
> +                conf {
> +                    pins = "gpio2";
> +                    output-enable;
> +                };
> +            };
> +
> +            gswp1-led0-pins {
> +                mux {
> +                    function = "phy1_led0";
> +                    groups = "gpio33";
> +                };
> +            };
> +
> +            gswp2-led1-pins {
> +                mux {
> +                    function = "phy2_led1";
> +                    groups = "gpio44";
> +                };
> +            };
> +        };
> +    };
> +
> +...
> 
> -- 
> 2.46.0
> 

-- 
Lee Jones [李琼斯]




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux