Re: [PATCH 1/6] pinctrl: ls1012a: Add pinctrl driver support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Aug 27, 2024 at 12:05:24PM +1000, David Leonard wrote:
>
> Add QorIQ LS1012A pinctrl driver, allowing i2c-core to exert
> GPIO control over the second I2C bus.
>
> Signed-off-by: David Leonard <David.Leonard@xxxxxxxx>
> ---

Why not use pinctrl-single ?

You can ref arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi

It did similar thing to use GPIO recover i2c bus.

Just need change dts file.

Frank


>  drivers/pinctrl/freescale/Kconfig           |   8 +
>  drivers/pinctrl/freescale/Makefile          |   1 +
>  drivers/pinctrl/freescale/pinctrl-ls1012a.c | 381 ++++++++++++++++++++
>  3 files changed, 390 insertions(+)
>  create mode 100644 drivers/pinctrl/freescale/pinctrl-ls1012a.c
>
> diff --git a/drivers/pinctrl/freescale/Kconfig b/drivers/pinctrl/freescale/Kconfig
> index 3b59d7189004..a2038042eeae 100644
> --- a/drivers/pinctrl/freescale/Kconfig
> +++ b/drivers/pinctrl/freescale/Kconfig
> @@ -209,6 +209,14 @@ config PINCTRL_IMX93
>  	help
>  	  Say Y here to enable the imx93 pinctrl driver
>
> +config PINCTRL_LS1012A
> +	tristate "LS1012A pinctrl driver"
> +	depends on ARCH_LAYERSCAPE && OF || COMPILE_TEST
> +	select PINMUX
> +	select GENERIC_PINCONF
> +	help
> +	  Say Y here to enable the ls1012a pinctrl driver
> +
>  config PINCTRL_VF610
>  	bool "Freescale Vybrid VF610 pinctrl driver"
>  	depends on SOC_VF610
> diff --git a/drivers/pinctrl/freescale/Makefile b/drivers/pinctrl/freescale/Makefile
> index d27085c2b4c4..6926529d8635 100644
> --- a/drivers/pinctrl/freescale/Makefile
> +++ b/drivers/pinctrl/freescale/Makefile
> @@ -35,3 +35,4 @@ obj-$(CONFIG_PINCTRL_IMX25)	+= pinctrl-imx25.o
>  obj-$(CONFIG_PINCTRL_IMX28)	+= pinctrl-imx28.o
>  obj-$(CONFIG_PINCTRL_IMXRT1050)	+= pinctrl-imxrt1050.o
>  obj-$(CONFIG_PINCTRL_IMXRT1170)	+= pinctrl-imxrt1170.o
> +obj-$(CONFIG_PINCTRL_LS1012A)	+= pinctrl-ls1012a.o
> diff --git a/drivers/pinctrl/freescale/pinctrl-ls1012a.c b/drivers/pinctrl/freescale/pinctrl-ls1012a.c
> new file mode 100644
> index 000000000000..d4c535ed6c07
> --- /dev/null
> +++ b/drivers/pinctrl/freescale/pinctrl-ls1012a.c
> @@ -0,0 +1,381 @@
> +// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
> +/*
> + * Pin controller for NXP QorIQ LS1012A.
> + *
> + * Copyright (c) 2024 Digi International, Inc.
> + * Author: David Leonard <David.Leonard@xxxxxxxx>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/pinctrl/pinctrl.h>
> +#include <linux/pinctrl/pinmux.h>
> +#include <linux/pinctrl/pinconf-generic.h>
> +#include <linux/of.h>
> +#include <linux/io.h>
> +#include <linux/regmap.h>
> +#include <linux/platform_device.h>
> +#include <linux/sys_soc.h>
> +
> +struct ls1012a_pinctrl_pdata {
> +	struct pinctrl_dev *pctl_dev;
> +	void __iomem *cr0mem;
> +	bool big_endian;
> +	u32 ssc;
> +};
> +
> +/* Bitfield macros for masks and values that follow the datasheet's
> + * bit numbering schemes for registers of different bit-endianess. */
> +#define BITV_BE(hi, v)	((v) << (31 - (hi) % 32))
> +#define BITM_BE(hi, lo)	(((1 << ((hi) - (lo) + 1)) - 1) << (31 - (hi) % 32))
> +#define BITV_LE(lo, v)	((v) << ((lo) % 32))
> +#define BITM_LE(lo, hi)	(((1 << ((hi) - (lo) + 1)) - 1) << ((lo) % 32))
> +
> +/* SCFG PMUXCR0 pinmux control register */
> +#define SCFG_PMUXCR0			0x430
> +#define QSPI_MUX_OVRD_MASK		BITM_BE(0, 0)	/* [0] */
> +#define QSPI_MUX_DISABLE		BITV_BE(0, 0)	/*  use RCW */
> +#define QSPI_MUX_ENABLE			BITV_BE(0, 1)	/*  use PMUXCR0 */
> +#define QSPI_DATA0_GPIO_OVR_MASK	BITM_BE(1, 1)	/* [1] */
> +#define QSPI_DATA0_GPIO_SEL_SPI		BITV_BE(1, 0)	/*  DATA0,SCK,CS0 */
> +#define QSPI_DATA0_GPIO_SEL_GPIO	BITV_BE(1, 1)	/*  GPIO1[4,11,5] */
> +#define QSPI_DATA1_GPIO_OVR_MASK	BITM_BE(3, 2)	/* [3:2] */
> +#define QSPI_DATA1_GPIO_SEL_SPI		BITV_BE(3, 0)	/*  DATA1 */
> +#define QSPI_DATA1_GPIO_SEL_GPIO	BITV_BE(3, 1)	/*  GPIO1[12] */
> +#define QSPI_IIC2_OVR_MASK		BITM_BE(5, 4)	/* [5:4] */
> +#define QSPI_IIC2_SEL_GPIO		BITV_BE(5, 0)	/*  GPIO1[13,14] */
> +#define QSPI_IIC2_SEL_I2C		BITV_BE(5, 1)	/*  SCL,SDA (rev0) */
> +#define QSPI_IIC2_SEL_SPI		BITV_BE(5, 2)	/*  DATA2,DATA3 */
> +
> +/* RCW SoC-specific configuration (read-only) */
> +#define DCFG_RCWSR			0x100
> +#define SOC_SPEC_CONFIG			416		/* word 13 */
> +#define DCFG_SSC_REG			(DCFG_RCWSR + SOC_SPEC_CONFIG / 8)
> +#define SSC_DATA0_GPIO_MASK		BITM_LE(421, 421)
> +#define SSC_DATA0_GPIO_SEL_SPI		BITV_LE(421, 0)	/*  DATA0,SCK,CS0 */
> +#define SSC_DATA0_GPIO_SEL_GPIO		BITV_LE(421, 1)	/*  GPIO1[11,4,5] */
> +#define SSC_DATA1_GPIO_MASK		BITM_LE(422, 423)
> +#define SSC_DATA1_GPIO_SEL_SPI		BITV_LE(422, 0)	/*  DATA1 */
> +#define SSC_DATA1_GPIO_SEL_GPIO		BITV_LE(422, 2)	/*  GPIO1[12] */
> +#define SSC_IIC2_MASK			BITM_LE(424, 425)
> +#define SSC_IIC2_SEL_GPIO		BITV_LE(424, 0)	/*  GPIO1[13,14] */
> +#define SSC_IIC2_SEL_I2C		BITV_LE(424, 2)	/*  SCL,SDA */
> +#define SSC_IIC2_SEL_SPI		BITV_LE(424, 1)	/*  DATA2,DATA3 */
> +#define SSC_IIC2_SEL_GPIO_RESET		BITV_LE(424, 3)	/*  GPIO1[13],RESET_REQ_B*/
> +
> +const struct pinctrl_pin_desc ls1012a_pins[] = {
> +	PINCTRL_PIN(60, "QSPI_A_DATA3/GPIO1_14/IIC2_SDA/RESET_REQ_B"),
> +	PINCTRL_PIN(61, "QSPI_A_DATA1/GPIO1_12"),
> +	PINCTRL_PIN(62, "QSPI_A_SCK/GPIO1_04"),
> +	PINCTRL_PIN(122, "QSPI_A_DATA2/GPIO1_13/IIC2_SCL"),
> +	PINCTRL_PIN(123, "QSPI_A_DATA0/GPIO1_11"),
> +	PINCTRL_PIN(124, "QSPI_A_CS0/GPIO1_05"),
> +};
> +
> +static const unsigned int qspi_1_grp[] = { 62, 123, 124 };
> +static const unsigned int qspi_2_grp[] = { 61 };
> +static const unsigned int qspi_3_grp[] = { 122, 60 };
> +
> +#define GRP_qspi_1	0	/* SCK,CS0,DATA0 */
> +#define GRP_qspi_2	1	/* DATA1 */
> +#define GRP_qspi_3	2	/* DATA2,DATA3 */
> +#define _GRP_max	3
> +
> +#define _PINGROUP(name) \
> +	[GRP_##name] = PINCTRL_PINGROUP(#name "_grp", name##_grp, ARRAY_SIZE(name##_grp))
> +static const struct pingroup ls1012a_groups[] = {
> +	_PINGROUP(qspi_1),
> +	_PINGROUP(qspi_2),
> +	_PINGROUP(qspi_3),
> +};
> +
> +
> +static void ls1012a_write_cr0(struct ls1012a_pinctrl_pdata *pd, u32 val)
> +{
> +	if (pd->big_endian)
> +		iowrite32be(val, pd->cr0mem);
> +	else
> +		iowrite32(val, pd->cr0mem);
> +}
> +
> +static u32 ls1012a_read_cr0(struct ls1012a_pinctrl_pdata *pd)
> +{
> +	return pd->big_endian ? ioread32be(pd->cr0mem) : ioread32(pd->cr0mem);
> +}
> +
> +static int ls1012a_get_groups_count(struct pinctrl_dev *pcdev)
> +{
> +	return ARRAY_SIZE(ls1012a_groups);
> +}
> +
> +static const char *ls1012a_get_group_name(struct pinctrl_dev *pcdev,
> +	unsigned int selector)
> +{
> +	return ls1012a_groups[selector].name;
> +}
> +
> +static int ls1012a_get_group_pins(struct pinctrl_dev *pcdev,
> +	unsigned int selector, const unsigned int **pins, unsigned int *npins)
> +{
> +	*pins = ls1012a_groups[selector].pins;
> +	*npins = ls1012a_groups[selector].npins;
> +	return 0;
> +}
> +
> +static const struct pinctrl_ops ls1012a_pinctrl_ops = {
> +	.get_groups_count = ls1012a_get_groups_count,
> +	.get_group_name = ls1012a_get_group_name,
> +	.get_group_pins = ls1012a_get_group_pins,
> +	.dt_node_to_map = pinconf_generic_dt_node_to_map_group,
> +	.dt_free_map = pinconf_generic_dt_free_map,
> +};
> +
> +static const char * const i2c_groups[] = { "qspi_3_grp" };
> +static const char * const spi_groups[] = { "qspi_1_grp", "qspi_2_grp", "qspi_3_grp" };
> +static const char * const gpio_groups[] = { "qspi_1_grp", "qspi_2_grp", "qspi_3_grp" };
> +static const char * const gpio_reset_groups[] = { "qspi_3_grp" };
> +
> +#define FUNC_i2c	0
> +#define FUNC_spi	1
> +#define FUNC_gpio	2
> +#define FUNC_gpio_reset 3
> +#define _FUNC_max	4
> +
> +#define _PINFUNC(name) \
> +	[FUNC_##name] = PINCTRL_PINFUNCTION(#name, name##_groups, ARRAY_SIZE(name##_groups))
> +static const struct pinfunction ls1012a_functions[] = {
> +	_PINFUNC(i2c),
> +	_PINFUNC(spi),
> +	_PINFUNC(gpio),
> +	_PINFUNC(gpio_reset),
> +};
> +
> +static int ls1012a_get_functions_count(struct pinctrl_dev *pctldev)
> +{
> +	return ARRAY_SIZE(ls1012a_functions);
> +}
> +
> +static const char *ls1012a_get_function_name(struct pinctrl_dev *pctldev, unsigned int func)
> +{
> +	return ls1012a_functions[func].name;
> +}
> +
> +static int ls1012a_get_function_groups(struct pinctrl_dev *pctldev, unsigned int func,
> +	const char * const **groups,
> +	unsigned int * const ngroups)
> +{
> +	*groups = ls1012a_functions[func].groups;
> +	*ngroups = ls1012a_functions[func].ngroups;
> +	return 0;
> +}
> +
> +/*
> + * LS1012A
> + *    Group: qspi_1             qspi_2      qspi_3
> + *           ================== =========== =============
> + *    Pin:   62    123    124   61          122    60
> + *           ----- ------ ----- ----------- ------ ------
> + * i2c                                      SCL    SDA    (RCW only)
> + * spi       SCK   DATA0
> + * spi       SCK   DATA0        DATA1
> + * spi       SCK   DATA0        DATA1       DATA2  DATA3
> + * gpio      GPIO4 GPIO11 GPIO5
> + * gpio                         GPIO12
> + * gpio                                     GPIO13 GPIO14
> + * gpio_reset                               GPIO13 REQ_B  (RCW only)
> + */
> +
> +static const struct ls1012a_func_mux {
> +	u32 cr0mask, cr0; /* mux control */
> +	u32 sscmask, ssc; /* equivalent in RCW */
> +} ls1012a_func_mux[_FUNC_max][_GRP_max] = {
> +	[FUNC_i2c] = {
> +		[GRP_qspi_3] = {
> +			.sscmask = SSC_IIC2_MASK,
> +			.ssc =     SSC_IIC2_SEL_I2C,
> +		},
> +	},
> +	[FUNC_spi] = {
> +		[GRP_qspi_1] = {
> +			.cr0mask = QSPI_DATA0_GPIO_OVR_MASK,
> +			.cr0 =     QSPI_DATA0_GPIO_SEL_SPI,
> +			.sscmask = SSC_DATA0_GPIO_MASK,
> +			.ssc =     SSC_DATA0_GPIO_SEL_SPI
> +		},
> +		[GRP_qspi_2] = {
> +			.cr0mask = QSPI_DATA1_GPIO_OVR_MASK,
> +			.cr0 =     QSPI_DATA1_GPIO_SEL_SPI,
> +			.sscmask = SSC_DATA1_GPIO_MASK,
> +			.ssc =     SSC_DATA1_GPIO_SEL_SPI,
> +		},
> +		[GRP_qspi_3] = {
> +			.cr0mask = QSPI_IIC2_OVR_MASK,
> +			.cr0 =     QSPI_IIC2_SEL_SPI,
> +			.sscmask = SSC_IIC2_MASK,
> +			.ssc =     SSC_IIC2_SEL_SPI,
> +		},
> +	},
> +	[FUNC_gpio] = {
> +		[GRP_qspi_1] = {
> +			.cr0mask = QSPI_DATA0_GPIO_OVR_MASK,
> +			.cr0 =     QSPI_DATA0_GPIO_SEL_GPIO,
> +			.sscmask = SSC_DATA0_GPIO_MASK,
> +			.ssc =     SSC_DATA0_GPIO_SEL_GPIO,
> +		},
> +		[GRP_qspi_2] = {
> +			.cr0mask = QSPI_DATA1_GPIO_OVR_MASK,
> +			.cr0 =     QSPI_DATA1_GPIO_SEL_GPIO,
> +			.sscmask = SSC_DATA1_GPIO_MASK,
> +			.ssc =     SSC_DATA1_GPIO_SEL_GPIO,
> +		},
> +		[GRP_qspi_3] = {
> +			.cr0mask = QSPI_IIC2_OVR_MASK,
> +			.cr0 =     QSPI_IIC2_SEL_GPIO,
> +			.sscmask = SSC_IIC2_MASK,
> +			.ssc =     SSC_IIC2_SEL_GPIO,
> +		},
> +	},
> +	[FUNC_gpio_reset] = {
> +		[GRP_qspi_3] = {
> +			.sscmask = SSC_IIC2_MASK,
> +			.ssc =     SSC_IIC2_SEL_GPIO_RESET,
> +		},
> +	},
> +};
> +
> +static int ls1012a_set_mux(struct pinctrl_dev *pcdev,
> +	unsigned int func, unsigned int group)
> +{
> +	struct ls1012a_pinctrl_pdata *pd = pinctrl_dev_get_drvdata(pcdev);
> +	const struct ls1012a_func_mux *fm = &ls1012a_func_mux[func][group];
> +	u32 cr0 = ls1012a_read_cr0(pd);
> +
> +	if (!fm->cr0mask) {
> +		if ((pd->ssc & fm->sscmask) != fm->ssc)
> +			return -EOPNOTSUPP;
> +		cr0 = (cr0 & ~QSPI_MUX_OVRD_MASK) | QSPI_MUX_DISABLE;
> +	} else {
> +		cr0 = (cr0 & ~fm->cr0mask) | fm->cr0;
> +		if ((pd->ssc & fm->sscmask) != fm->ssc)
> +			cr0 = (cr0 & ~QSPI_MUX_OVRD_MASK) | QSPI_MUX_ENABLE;
> +	}
> +	ls1012a_write_cr0(pd, cr0);
> +	return 0;
> +}
> +
> +static void ls1012a_init_mux(struct ls1012a_pinctrl_pdata *pd)
> +{
> +	unsigned int func, group;
> +	const struct ls1012a_func_mux *fm;
> +	u32 cr0;
> +
> +	cr0 = ls1012a_read_cr0(pd);
> +	if ((cr0 & QSPI_MUX_OVRD_MASK) == QSPI_MUX_DISABLE) {
> +		/*
> +		 * Prepare a disabled MUXCR0 to have a same/similar
> +		 * configuration as RCW SSC, and leave it disabled.
> +		 */
> +		for (func = 0; func < _FUNC_max; func++) {
> +			for (group = 0; group < _GRP_max; group++) {
> +				fm = &ls1012a_func_mux[func][group];
> +				if (fm->sscmask &&
> +				    fm->ssc == (pd->ssc & fm->sscmask)) {
> +					cr0 &= ~fm->cr0mask;
> +					cr0 |= fm->cr0;
> +				}
> +			}
> +		}
> +		ls1012a_write_cr0(pd, cr0);
> +	}
> +}
> +
> +static const struct pinmux_ops ls1012a_pinmux_ops = {
> +	.get_functions_count = ls1012a_get_functions_count,
> +	.get_function_name = ls1012a_get_function_name,
> +	.get_function_groups = ls1012a_get_function_groups,
> +	.set_mux = ls1012a_set_mux,
> +};
> +
> +static struct pinctrl_desc ls1012a_pinctrl_desc = {
> +	.name = "ls1012a",
> +	.pins = ls1012a_pins,
> +	.npins = ARRAY_SIZE(ls1012a_pins),
> +	.pctlops = &ls1012a_pinctrl_ops,
> +	.pmxops = &ls1012a_pinmux_ops,
> +	.owner = THIS_MODULE,
> +};
> +
> +static int ls1012a_pinctrl_probe(struct platform_device *pdev)
> +{
> +	struct ls1012a_pinctrl_pdata *pd;
> +	int ret;
> +	u32 dcfg_ssc;
> +	struct regmap *dcfg_regmap;
> +
> +	pd = devm_kzalloc(&pdev->dev, sizeof(*pd), GFP_KERNEL);
> +	if (!pd)
> +		return -ENOMEM;
> +	platform_set_drvdata(pdev, pd);
> +
> +	pd->big_endian = device_is_big_endian(&pdev->dev);
> +
> +	/* SCFG PMUX0 */
> +	pd->cr0mem = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(pd->cr0mem))
> +		return PTR_ERR(pd->cr0mem);
> +	dev_dbg(&pdev->dev, "scfg pmuxcr0 at %px %s", pd->cr0mem,
> +		pd->big_endian ? "be" : "le");
> +
> +	/* DCFG RCW SSC */
> +	dcfg_regmap = syscon_regmap_lookup_by_phandle(
> +		dev_of_node(&pdev->dev), "dcfg-regmap");
> +	if (IS_ERR(dcfg_regmap)) {
> +		dev_err(&pdev->dev, "dcfg regmap: %pe\n", dcfg_regmap);
> +		return -EINVAL;
> +	}
> +	ret = regmap_read(dcfg_regmap, DCFG_SSC_REG, &dcfg_ssc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "dcfg-regmap read: %d\n", ret);
> +		return ret;
> +	}
> +	pd->ssc = swab32(dcfg_ssc); /* untwist RCW fields */
> +
> +	dev_dbg(&pdev->dev, "dcfg ssc = %08x (grp1=%s grp2=%s grp3=%s)\n",
> +		pd->ssc,
> +		(pd->ssc & SSC_DATA0_GPIO_MASK) == SSC_DATA0_GPIO_SEL_SPI ? "spi" : "gpio",
> +		(pd->ssc & SSC_DATA1_GPIO_MASK) == SSC_DATA1_GPIO_SEL_SPI ? "spi"
> +		: (pd->ssc & SSC_DATA1_GPIO_MASK) == SSC_DATA1_GPIO_SEL_GPIO ? "gpio"
> +		: (pd->ssc & SSC_DATA1_GPIO_MASK) == 0x80 ? "10" : "11",
> +		(pd->ssc & SSC_IIC2_MASK) == SSC_IIC2_SEL_GPIO ? "gpio"
> +		: (pd->ssc & SSC_IIC2_MASK) == SSC_IIC2_SEL_I2C ? "i2c"
> +		: (pd->ssc & SSC_IIC2_MASK) == SSC_IIC2_SEL_SPI ? "spi"
> +		: "gpio+reset");
> +
> +	ls1012a_init_mux(pd);
> +
> +	ret = devm_pinctrl_register_and_init(&pdev->dev, &ls1012a_pinctrl_desc,
> +		pd, &pd->pctl_dev);
> +	if (ret)
> +		return dev_err_probe(&pdev->dev, ret, "Failed pinctrl init\n");
> +
> +	pinctrl_enable(pd->pctl_dev);
> +	return ret;
> +}
> +
> +static const struct of_device_id ls1012a_pinctrl_match_table[] = {
> +	{ .compatible = "fsl,ls1012a-pinctrl" },
> +	{ /* sentinel */ }
> +};
> +
> +static struct platform_driver ls1012a_pinctrl_driver = {
> +	.driver = {
> +		.name = "ls1012a_pinctrl",
> +		.of_match_table = ls1012a_pinctrl_match_table,
> +	},
> +	.probe = ls1012a_pinctrl_probe,
> +};
> +
> +builtin_platform_driver(ls1012a_pinctrl_driver)
> +
> +MODULE_DESCRIPTION("LS1012A pinctrl driver");
> +MODULE_LICENSE("GPL");
> --
> 2.43.0
>




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux