The pinctrl subnodes that define the pin configuration of other devices
under PIO3 pinmux controller are not simple memory mapped nodes.Ergo,
change simple-bus to simple-mfd.
Signed-off-by: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
---
arch/arm/boot/dts/microchip/at91rm9200.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9260.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9261.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9263.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9g45.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9n12.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9rl.dtsi | 2 +-
arch/arm/boot/dts/microchip/at91sam9x5.dtsi | 2 +-
arch/arm/boot/dts/microchip/sam9x60.dtsi | 2 +-
arch/arm/boot/dts/microchip/sama5d3.dtsi | 2 +-
arch/arm/boot/dts/microchip/sama5d4.dtsi | 2 +-
11 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/microchip/at91rm9200.dtsi b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
index 16c675e3a890..02a838541dc3 100644
--- a/arch/arm/boot/dts/microchip/at91rm9200.dtsi
+++ b/arch/arm/boot/dts/microchip/at91rm9200.dtsi
@@ -225,7 +225,7 @@ macb0: ethernet@fffbc000 {
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask = <
diff --git a/arch/arm/boot/dts/microchip/at91sam9260.dtsi b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
index e56d5546554c..0038183e9a53 100644
--- a/arch/arm/boot/dts/microchip/at91sam9260.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9260.dtsi
@@ -170,7 +170,7 @@ tcb1: timer@fffdc000 {
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x600>;
atmel,mux-mask = <
diff --git a/arch/arm/boot/dts/microchip/at91sam9261.dtsi b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
index 307b60658014..b57a7fd67197 100644
--- a/arch/arm/boot/dts/microchip/at91sam9261.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9261.dtsi
@@ -317,7 +317,7 @@ dbgu: serial@fffff200 {
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x600>;
atmel,mux-mask =
diff --git a/arch/arm/boot/dts/microchip/at91sam9263.dtsi b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
index 75d8ff2d12c8..b95d4016ae9f 100644
--- a/arch/arm/boot/dts/microchip/at91sam9263.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9263.dtsi
@@ -167,7 +167,7 @@ poweroff@fffffd10 {
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
diff --git a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
index 325c63a53118..c54eb21d5cba 100644
--- a/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9g45.dtsi
@@ -190,7 +190,7 @@ dma: dma-controller@ffffec00 {
pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
diff --git a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
index 8dc04e9031a6..9aa22195051d 100644
--- a/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9n12.dtsi
@@ -226,7 +226,7 @@ dma: dma-controller@ffffec00 {
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask = <
diff --git a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
index 7436b5c862b1..1fec9fcc7cd1 100644
--- a/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9rl.dtsi
@@ -339,7 +339,7 @@ dbgu: serial@fffff200 {
pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
atmel,mux-mask =
diff --git a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
index a7456c2191fa..d41d7c844200 100644
--- a/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/microchip/at91sam9x5.dtsi
@@ -202,7 +202,7 @@ dma1: dma-controller@ffffee00 {
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
/* shared pinctrl settings */
diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 291540e5d81e..4e71ae63edf1 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -1223,7 +1223,7 @@ AT91_XDMAC_DT_PERID(28))>,
pinctrl: pinctrl@fffff400 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
+ compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-mfd";
ranges = <0xfffff400 0xfffff400 0x800>;
/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
diff --git a/arch/arm/boot/dts/microchip/sama5d3.dtsi b/arch/arm/boot/dts/microchip/sama5d3.dtsi
index d4fc0c1dfc10..f1614dcd7d28 100644
--- a/arch/arm/boot/dts/microchip/sama5d3.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d3.dtsi
@@ -493,7 +493,7 @@ aic: interrupt-controller@fffff000 {
pinctrl: pinctrl@fffff200 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+ compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-mfd";
ranges = <0xfffff200 0xfffff200 0xa00>;
atmel,mux-mask = <
/* A B C */
diff --git a/arch/arm/boot/dts/microchip/sama5d4.dtsi b/arch/arm/boot/dts/microchip/sama5d4.dtsi
index 58ceed997889..69dd4e7b4c14 100644
--- a/arch/arm/boot/dts/microchip/sama5d4.dtsi
+++ b/arch/arm/boot/dts/microchip/sama5d4.dtsi
@@ -791,7 +791,7 @@ dbgu: serial@fc069000 {
pinctrl: pinctrl@fc06a000 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-bus";
+ compatible = "atmel,sama5d3-pinctrl", "atmel,at91sam9x5-pinctrl", "simple-mfd";
ranges = <0xfc068000 0xfc068000 0x100
0xfc06a000 0xfc06a000 0x4000>;
/* WARNING: revisit as pin spec has changed */
--
2.25.1
[PATCH 1/5] ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [PATCH 1/5] ARM: dts: microchip: change to simple-mfd from simple-bus for PIO3 pinumux controller
- From: Manikandan Muralidharan <manikandan.m@xxxxxxxxxxxxx>
- Date: Mon, 24 Jun 2024 15:34:27 +0530
- In-reply-to: <20240624100431.191172-1-manikandan.m@microchip.com>
- References: <20240624100431.191172-1-manikandan.m@microchip.com>
- References:
- [PATCH 0/5] Convert Atmel PIO3 Pinctrl and GPIO bindings to yaml
- From: Manikandan Muralidharan
- [PATCH 0/5] Convert Atmel PIO3 Pinctrl and GPIO bindings to yaml
- Prev by Date: [PATCH 2/5] ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
- Next by Date: [PATCH 3/5] ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
- Previous by thread: [PATCH 2/5] ARM: dts: microchip: Remove additional compatible string from PIO3 pinctrl nodes
- Next by thread: [PATCH 3/5] ARM: dts: microchip: sam9x60: Remove additional compatible string from GPIO node
- Index(es):
 |