Re: [PATCH] GPIO: Add GPIO support for the ACCES 104-IDIO-16

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Tue, Oct 6, 2015 at 1:11 AM, William Breathitt Gray
<vilhelm.gray@xxxxxxxxx> wrote:
> On 10/05/2015 06:47 PM, Bjorn Helgaas wrote:

>> I'm really not familiar with PC/104, but wikipedia claims it only uses
>> ISA.  Apparently PCI/104-Plus, PCI-104, PCI/104-Express, and PCIe/104
>> *do* have PCI and/or PCIe, but it looks like the base PC/104 does not.
>
> This is correct: PC/104 is only ISA.

OK then let's drop that confusing "PCI GPIO expanders" menu.

Maybe "ISA GPIO cards" or similar is more apropriate.

> The ACCES 104-IDIO-16 board is a
> PC/104 stackable GPIO board, whose port address is configured via
> physical jumper switches on the board; it is not "hotpluggable." For
> this reason, the CONFIG_104_IDIO_16_BASE option should be set to the
> same port address physically configured on the board.

I think the pattern in the kernel is to support such configuration for ISA
is with module parameters, not with compile-time constants. So switch
that base to use a module parameter.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html