On Thu, Jul 16, 2015 at 1:34 PM, Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx> wrote: > On Thu, Jul 16, 2015 at 10:52:58AM +0200, Linus Walleij wrote: >> On Fri, Jun 26, 2015 at 2:26 AM, Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> wrote: >> >> > Bug in function imx1_pinconf_set() cause crash when >> > princtrl debug is enabled and the pin_id becomes larger >> > then the info->pins[] contains data. >> > >> > imx27-pinctrl 10015000.iomuxc: request pin 134 (MX27_PAD_UART2_TXD) for >> > 1000b000.serial >> > imx27-pinctrl 10015000.iomuxc: request pin 135 (MX27_PAD_UART2_RXD) for >> > 1000b000.serial >> > imx27-pinctrl 10015000.iomuxc: request pin 131 (MX27_PAD_UART2_CTS) for >> > 1000b000.serial >> > imx27-pinctrl 10015000.iomuxc: request pin 132 (MX27_PAD_UART2_RTS) for >> > 1000b000.serial >> > imx27-pinctrl 10015000.iomuxc: enable function uart group uart2-1 >> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x86, function 0, gpio 0, >> > direction 1, oconf 0, iconfa 0, iconfb 0 >> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x87, function 0, gpio 0, >> > direction 0, oconf 0, iconfa 0, iconfb 0 >> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x83, function 0, gpio 0, >> > direction 1, oconf 0, iconfa 0, iconfb 0 >> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x84, function 0, gpio 0, >> > direction 0, oconf 0, iconfa 0, iconfb 0 >> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=134 >> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_RTS >> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=135 >> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_RTCK >> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=131 >> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_TXD >> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=132 >> > imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_RXD >> > ... >> > imx27-pinctrl 10015000.iomuxc: write: register 0xf4415508 offset 4 value 0x3 >> > imx27-pinctrl 10015000.iomuxc: write: register 0xf4415510 offset 4 value 0x0 >> > imx27-pinctrl 10015000.iomuxc: write: register 0xf4415518 offset 4 value 0x0 >> > imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0xb5, function 0, gpio 0, >> > direction 1, oconf 0, iconfa 0, iconfb 0 >> > imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=171 >> > Unable to handle kernel paging request at virtual address 6c61765f >> > pgd = c0004000 >> > 6c61765f] *pgd=00000000 >> > Internal error: Oops: 5 [#1] ARM >> > Modules linked in: >> > CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-rc4-next-20150522-dirty #8 >> > Hardware name: GTSYS i.MX27GTSIR (Device Tree Support) >> > task: ce832000 ti: ce848000 task.ti: ce848000 >> > PC is at strnlen+0x28/0x3c >> > LR is at string.isra.4+0x34/0xcc >> > pc : [<c01ae188>] lr : [<c01af9a4>] psr: 20000093 >> > sp : ce849a88 ip : ce849a98 fp : ce849a94 >> > r10: c05d7e3a r9 : c05d81e4 r8 : 00000000 >> > r7 : 6c61765f r6 : c05d81e4 r5 : ffffffff r4 : c05d7e3a >> > r3 : 6c61765f r2 : 6c61765f r1 : 6c61765e r0 : 6c61765f >> > Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel >> > >> > >> > Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> >> >> Patch applied. Can't seem so see anyone who's safeguarding this >> driver recently, putting some people on To: > > I commented in that thread and the outcome from my POV was that the fix > needs a better changelog and it could be optimised to not lookup the pin > if debug is off. (I don't know the patch content, as it was stripped in > the reply.) OK Chris will you send a new version of this patch? Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html