Re: [Resend][PATCH] Pinctrl: imx1: fix wrong pin-name resolving

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Fri, Jun 26, 2015 at 2:26 AM, Chris Ruehl <chris.ruehl@xxxxxxxxxxxx> wrote:

> Bug in function imx1_pinconf_set() cause crash when
> princtrl debug is enabled and the pin_id becomes larger
> then the info->pins[] contains data.
>
> imx27-pinctrl 10015000.iomuxc: request pin 134 (MX27_PAD_UART2_TXD) for
> 1000b000.serial
> imx27-pinctrl 10015000.iomuxc: request pin 135 (MX27_PAD_UART2_RXD) for
> 1000b000.serial
> imx27-pinctrl 10015000.iomuxc: request pin 131 (MX27_PAD_UART2_CTS) for
> 1000b000.serial
> imx27-pinctrl 10015000.iomuxc: request pin 132 (MX27_PAD_UART2_RTS) for
> 1000b000.serial
> imx27-pinctrl 10015000.iomuxc: enable function uart group uart2-1
> imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x86, function 0, gpio 0,
> direction 1, oconf 0, iconfa 0, iconfb 0
> imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x87, function 0, gpio 0,
> direction 0, oconf 0, iconfa 0, iconfb 0
> imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x83, function 0, gpio 0,
> direction 1, oconf 0, iconfa 0, iconfb 0
> imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0x84, function 0, gpio 0,
> direction 0, oconf 0, iconfa 0, iconfb 0
> imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=134
> imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_RTS
> imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=135
> imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_RTCK
> imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=131
> imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_TXD
> imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=132
> imx27-pinctrl 10015000.iomuxc: pinconf set pullup pin MX27_PAD_UART1_RXD
> ...
> imx27-pinctrl 10015000.iomuxc: write: register 0xf4415508 offset 4 value 0x3
> imx27-pinctrl 10015000.iomuxc: write: register 0xf4415510 offset 4 value 0x0
> imx27-pinctrl 10015000.iomuxc: write: register 0xf4415518 offset 4 value 0x0
> imx27-pinctrl 10015000.iomuxc: imx1_pmx_set, pin 0xb5, function 0, gpio 0,
> direction 1, oconf 0, iconfa 0, iconfb 0
> imx27-pinctrl 10015000.iomuxc: num_configs=1 PinID=171
> Unable to handle kernel paging request at virtual address 6c61765f
> pgd = c0004000
> 6c61765f] *pgd=00000000
> Internal error: Oops: 5 [#1] ARM
> Modules linked in:
> CPU: 0 PID: 1 Comm: swapper Not tainted 4.1.0-rc4-next-20150522-dirty #8
> Hardware name: GTSYS i.MX27GTSIR (Device Tree Support)
> task: ce832000 ti: ce848000 task.ti: ce848000
> PC is at strnlen+0x28/0x3c
> LR is at string.isra.4+0x34/0xcc
> pc : [<c01ae188>]    lr : [<c01af9a4>]    psr: 20000093
> sp : ce849a88  ip : ce849a98  fp : ce849a94
> r10: c05d7e3a  r9 : c05d81e4  r8 : 00000000
> r7 : 6c61765f  r6 : c05d81e4  r5 : ffffffff  r4 : c05d7e3a
> r3 : 6c61765f  r2 : 6c61765f  r1 : 6c61765e  r0 : 6c61765f
> Flags: nzCv  IRQs off  FIQs on  Mode SVC_32  ISA ARM  Segment kernel
>
>
> Signed-off-by: Chris Ruehl <chris.ruehl@xxxxxxxxxxxx>

Patch applied. Can't seem so see anyone who's safeguarding this
driver recently, putting some people on To:

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html