On Mon, May 25, 2015 at 10:39 PM, Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> wrote: > 0x3 only masks two bits, but three bits have to be allowed. This fixes > GPHY0 LED2 (which is the highest bit of phy2) on my board. > > Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> Patch applied with John's ACK. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH 1/2] gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH 1/2] gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Mon, 1 Jun 2015 16:44:01 +0200
- In-reply-to: <1432586391-27634-1-git-send-email-martin.blumenstingl@googlemail.com>
- References:
- [PATCH 1/2] gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
- From: Martin Blumenstingl
- [PATCH 1/2] gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
- Prev by Date: Re: [PATCH] gpio: Prevent an integer overflow in the pca953x driver
- Next by Date: Re: [PATCH] gpio: pcf857x: Check for irq_set_irq_wake() failures
- Previous by thread: Re: [PATCH 1/2] gpio-stp-xway: Fix enabling the highest bit of the PHY LEDs
- Next by thread: [PATCH] pinctrl: zynq: change error code for pinctrl_register failure
- Index(es):
 |