Re: [PATCH v2] gpio: bcm-kona: Implement get_direction callback

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 4/13/2015 12:56 AM, Axel Lin wrote:
> Implement gpio_chip's get_direction() callback, that lets other drivers get
> particular GPIOs direction using gpiod_get_direction().
> 
> Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
> ---
> v2: Make bcm_kona_gpio_get_dir explicitly return GPIOF_DIR_IN or GPIOF_DIR_OUT.
> 
>  drivers/gpio/gpio-bcm-kona.c | 26 ++++++++++++++++----------
>  1 file changed, 16 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/gpio/gpio-bcm-kona.c b/drivers/gpio/gpio-bcm-kona.c
> index b164ce8..a6e7922 100644
> --- a/drivers/gpio/gpio-bcm-kona.c
> +++ b/drivers/gpio/gpio-bcm-kona.c
> @@ -122,6 +122,16 @@ static void bcm_kona_gpio_unlock_gpio(struct bcm_kona_gpio *kona_gpio,
>  	spin_unlock_irqrestore(&kona_gpio->lock, flags);
>  }
>  
> +static int bcm_kona_gpio_get_dir(struct gpio_chip *chip, unsigned gpio)
> +{
> +	struct bcm_kona_gpio *kona_gpio = to_kona_gpio(chip);
> +	void __iomem *reg_base = kona_gpio->reg_base;
> +	u32 val;
> +
> +	val = readl(reg_base + GPIO_CONTROL(gpio)) & GPIO_GPCTR0_IOTR_MASK;
> +	return val ? GPIOF_DIR_IN : GPIOF_DIR_OUT;
> +}
> +
>  static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
>  {
>  	struct bcm_kona_gpio *kona_gpio;
> @@ -135,12 +145,8 @@ static void bcm_kona_gpio_set(struct gpio_chip *chip, unsigned gpio, int value)
>  	reg_base = kona_gpio->reg_base;
>  	spin_lock_irqsave(&kona_gpio->lock, flags);
>  
> -	/* determine the GPIO pin direction */
> -	val = readl(reg_base + GPIO_CONTROL(gpio));
> -	val &= GPIO_GPCTR0_IOTR_MASK;
> -
>  	/* this function only applies to output pin */
> -	if (GPIO_GPCTR0_IOTR_CMD_INPUT == val)
> +	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
>  		goto out;
>  
>  	reg_offset = value ? GPIO_OUT_SET(bank_id) : GPIO_OUT_CLEAR(bank_id);
> @@ -166,13 +172,12 @@ static int bcm_kona_gpio_get(struct gpio_chip *chip, unsigned gpio)
>  	reg_base = kona_gpio->reg_base;
>  	spin_lock_irqsave(&kona_gpio->lock, flags);
>  
> -	/* determine the GPIO pin direction */
> -	val = readl(reg_base + GPIO_CONTROL(gpio));
> -	val &= GPIO_GPCTR0_IOTR_MASK;
> +	if (bcm_kona_gpio_get_dir(chip, gpio) == GPIOF_DIR_IN)
> +		reg_offset = GPIO_IN_STATUS(bank_id);
> +	else
> +		reg_offset = GPIO_OUT_STATUS(bank_id);
>  
>  	/* read the GPIO bank status */
> -	reg_offset = (GPIO_GPCTR0_IOTR_CMD_INPUT == val) ?
> -	    GPIO_IN_STATUS(bank_id) : GPIO_OUT_STATUS(bank_id);
>  	val = readl(reg_base + reg_offset);
>  
>  	spin_unlock_irqrestore(&kona_gpio->lock, flags);
> @@ -310,6 +315,7 @@ static struct gpio_chip template_chip = {
>  	.owner = THIS_MODULE,
>  	.request = bcm_kona_gpio_request,
>  	.free = bcm_kona_gpio_free,
> +	.get_direction = bcm_kona_gpio_get_dir,
>  	.direction_input = bcm_kona_gpio_direction_input,
>  	.get = bcm_kona_gpio_get,
>  	.direction_output = bcm_kona_gpio_direction_output,
> 

This change looks good to me!

Reviewed-by: Ray Jui <rjui@xxxxxxxxxxxx>

Thanks!

Ray

--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux