Re: [PATCH 0/2] ARM: mvebu: Add DLINK-DNS327L support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Andrew,

On 11/04/2015 23:28, Andrew Lunn wrote:
>> When power button is pressed to turn the NAS off, weltrend signals 
>> the SoC by driving mpp63 line low. Apparently right now pinctrl assumes
>> that this line can only work as 'gpo' that screws up gpio-buttons driver.
>> Since without gpio-buttons, mpp63 works as input properly via sysfs 
>> interface, I've added a patch for pinctrl-armada-370.c that fixes the 
>> issue.
> 
> Hi Andrew
> 
> This is odd. I just checked the Marvell datasheets, and they list this
> pin a GPO.
> 
> We probably want Thomas or Gregory to check this with Marvell.

I have check on the datasheet I have (in case of it was different of the public one)
and for all the variant of the Armada 370:  88F6710, 88F6707, and 88F6W11 the MPP63
is list as GPO.

I will ask Marvell to see if it was a typo on their datasheet.


Thanks,

Gregory


> 
>    Andrew
> 


-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux