Re: [PATCH v4 3/4] gpio: Add find GPIO base in increasing order

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 14, 2015 at 5:13 PM, Linus Walleij <linus.walleij@xxxxxxxxxx> wrote:
> On Wed, Dec 10, 2014 at 9:51 AM, Alexandre Courbot <gnurou@xxxxxxxxx> wrote:
>> On Fri, Dec 5, 2014 at 12:38 PM, Zhou Wang <wangzhou.bry@xxxxxxxxx> wrote:
>>> In function gpiochip_find_base, base number of a GPIO controller
>>> is found in decreasing order. ARCH_NR_GPIOS is used to define from
>>> which number we begin to search for base number of a GPIO controller.
>>>
>>> In fact, ARCH_NR_GPIOS brings us some multiplatform problems, like:
>>> http://www.spinics.net/lists/devicetree/msg60433.html
>>>
>>> This patch adds the support to find base number of a GPIO controller
>>> in increasing order. It will assign base number from 0.
>>> A new dts property called gpio-number-forward must be add to the related
>>> GPIO dts nodes if you want it works well.
>>
>> Global GPIO numbers are a Linux-only concept, so your property should
>> be named linux,gpio-number-forward.
>>
>> But even that way I don't think I like this idea. This just adds some
>> more mess to how the GPIO number space is constructed, and it is
>> already quite messy as it is. You have no guarantee over the probe
>> order of your GPIO controllers, so they may very well be probed in a
>> different order and end up with different base numbers anytime.
>
> Yup.
>
> The way stuff is usually forced ordered in device tree is to use
> aliases, e.g.:
>
>         aliases {
>                 serial0 = &pb1176_serial0;
>                 serial1 = &pb1176_serial1;
>                 serial2 = &pb1176_serial2;
>                 serial3 = &pb1176_serial3;
>                 serial4 = &fpga_serial;
>         };
>
> By getting the alias ID with of_alias_get_id(np, "serial")
> a certain serial port is assigned to be
> 0, 1, 2 ...
>
> I think I could accept a tweak of this patch that will register
> GPIOs beginning from 0 if and only if the alias mechanism is
> used.
>
>         aliases {
>                 gpio0 = &foo_gpio0;
>                 gpio1 = &expander;
>         };
>
>
> The actual Linux-specific integer base will *NOT* be in the
> device tree, but if you know how many GPIOs are on each
> controller the number space is still stable and predictable
> beginning from 0. If one want to keep track of the Linux
> number space one can do so with comments in the device
> tree or something.
>
>> I know we pushed back against this kind of solution in the past, but
>> it is still more reliable than having a property that affects how the
>> kernel's base finding function works, and will offer us a way to
>> eventually put ARCH_NR_GPIOS and gpiochip_find_base() to rest (at the
>> cost of backwards-compatibility, but we just cannot do without it).
>> Linus, do you agree?
>
> What do you think about the above?

It would definitely help with the probe order, but unfortunately not
with the fact that GPIO bases are allocated in decreasing order
starting from the potentially varying ARCH_NR_GPIOS. So that alone
will not be able to ensure stable GPIO numbers.
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux