Re: [PATCH 4/5] GPIO: MIPS: ralink: add gpio driver for ralink MT762x SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 20/10/2014 06:57, Alexandre Courbot wrote:
> On Sat, Oct 11, 2014 at 5:28 AM, John Crispin <blogic@xxxxxxxxxxx> 
> wrote:
>> Add gpio driver for Ralink SoC. This driver makes the gpio core 
>> on MT7621 and MT7628 work.
> 
> Basically I have the same remarks as for the rt2880 driver. Both 
> seem to be very similar, and to work kind of like the gpio-generic 
> driver. I wonder if there wouldn't be a way to leverage this
> driver instead of rewriting the same logic X times?
> 
> Some more comments below...
> 
>> 
>> Signed-off-by: John Crispin <blogic@xxxxxxxxxxx> Cc: 
>> linux-mips@xxxxxxxxxxxxxx Cc: linux-gpio@xxxxxxxxxxxxxxx --- 
>> drivers/gpio/Kconfig       |    6 ++ drivers/gpio/Makefile
>> | 1 + drivers/gpio/gpio-mt7621.c |  195 
>> ++++++++++++++++++++++++++++++++++++++++++++ 3 files changed,
>> 202 insertions(+) create mode 100644 drivers/gpio/gpio-mt7621.c
>> 
>> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 
>> c91b15b..1ef83a0 100644 --- a/drivers/gpio/Kconfig +++ 
>> b/drivers/gpio/Kconfig @@ -523,6 +523,12 @@ config 
>> GPIO_MC9S08DZ60 help Select this to enable the MC9S08DZ60 GPIO 
>> driver
>> 
>> +config GPIO_MT7621 +       bool "Mediatek GPIO Support" + 
>> depends on MIPS && (SOC_MT7620 || SOC_MT7621) +       help + Say
>> yes here to support the Mediatek SoC GPIO device + config 
>> GPIO_PCA953X tristate "PCA95[357]x, PCA9698, TCA64xx, and
>> MAX7310 I/O ports" depends on I2C diff --git
>> a/drivers/gpio/Makefile b/drivers/gpio/Makefile index
>> d8f0f17..60a9e0e 100644 --- a/drivers/gpio/Makefile +++
>> b/drivers/gpio/Makefile @@ -57,6 +57,7 @@
>> obj-$(CONFIG_GPIO_MPC8XXX)    += gpio-mpc8xxx.o 
>> obj-$(CONFIG_GPIO_MSIC)                += gpio-msic.o 
>> obj-$(CONFIG_GPIO_MSM_V1)      += gpio-msm-v1.o 
>> obj-$(CONFIG_GPIO_MSM_V2)      += gpio-msm-v2.o 
>> +obj-$(CONFIG_GPIO_MT7621)      += gpio-mt7621.o 
>> obj-$(CONFIG_GPIO_MVEBU)        += gpio-mvebu.o 
>> obj-$(CONFIG_GPIO_MXC)         += gpio-mxc.o 
>> obj-$(CONFIG_GPIO_MXS)         += gpio-mxs.o diff --git 
>> a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c new 
>> file mode 100644 index 0000000..7faf2c0 --- /dev/null +++ 
>> b/drivers/gpio/gpio-mt7621.c @@ -0,0 +1,195 @@ +/* + * This 
>> program is free software; you can redistribute it and/or modify 
>> it + * under the terms of the GNU General Public License version 
>> 2 as published + * by the Free Software Foundation. + * + * 
>> Copyright (C) 2009-2011 Gabor Juhos <juhosg@xxxxxxxxxxx> + * 
>> Copyright (C) 2013 John Crispin <blogic@xxxxxxxxxxx> + */ + 
>> +#include <linux/io.h> +#include <linux/err.h> +#include 
>> <linux/gpio.h> +#include <linux/module.h> +#include 
>> <linux/of_irq.h> +#include <linux/spinlock.h> +#include 
>> <linux/irqdomain.h> +#include <linux/interrupt.h> +#include 
>> <linux/platform_device.h> + +#define MTK_BANK_WIDTH         32 + 
>> +enum mediatek_gpio_reg { +       GPIO_REG_CTRL = 0, + 
>> GPIO_REG_POL, +       GPIO_REG_DATA, +       GPIO_REG_DSET, + 
>> GPIO_REG_DCLR, +}; + +static void __iomem *mtk_gc_membase; + 
>> +struct mtk_gc { +       struct gpio_chip chip; + spinlock_t
>> lock; +       int bank; +}; + +static inline struct mtk_gc
>> +*to_mediatek_gpio(struct gpio_chip *chip) +{ + struct mtk_gc
>> *mgc; + +       mgc = container_of(chip, struct mtk_gc, chip); +
>> +       return mgc; +} + +static inline void +mtk_gpio_w32(struct
>> mtk_gc *rg, u8 reg, u32 val) +{ + iowrite32(val, mtk_gc_membase +
>> (reg * 0x10) + (rg->bank * 0x4)); +} + +static inline u32
>> +mtk_gpio_r32(struct mtk_gc *rg, u8 reg) +{ +       return
>> ioread32(mtk_gc_membase + (reg * 0x10) + (rg->bank * 0x4)); +} +
>> +static void +mediatek_gpio_set(struct gpio_chip *chip, unsigned
>> offset, int value) +{ +       struct mtk_gc *rg =
>> to_mediatek_gpio(chip); + +       mtk_gpio_w32(rg, (value) ?
>> GPIO_REG_DSET : GPIO_REG_DCLR, BIT(offset)); +} + +static int
>> +mediatek_gpio_get(struct gpio_chip *chip, unsigned offset) +{ +
>> struct mtk_gc *rg = to_mediatek_gpio(chip); + +       return
>> !!(mtk_gpio_r32(rg, GPIO_REG_DATA) & BIT(offset)); +} + +static
>> int +mediatek_gpio_direction_input(struct gpio_chip *chip,
>> unsigned offset) +{ +       struct mtk_gc *rg =
>> to_mediatek_gpio(chip); + unsigned long flags; +       u32 t; +
>> + spin_lock_irqsave(&rg->lock, flags); +       t =
>> mtk_gpio_r32(rg, GPIO_REG_CTRL); +       t &= ~BIT(offset); + 
>> mtk_gpio_w32(rg, GPIO_REG_CTRL, t); + 
>> spin_unlock_irqrestore(&rg->lock, flags); + +       return 0; +} 
>> + +static int +mediatek_gpio_direction_output(struct gpio_chip 
>> *chip, +                                       unsigned offset, 
>> int value) +{ +       struct mtk_gc *rg = to_mediatek_gpio(chip);
>> +       unsigned long flags; +       u32 t; + +
>> spin_lock_irqsave(&rg->lock, flags); +       t = mtk_gpio_r32(rg,
>> GPIO_REG_CTRL); +       t |= BIT(offset); + mtk_gpio_w32(rg,
>> GPIO_REG_CTRL, t); + mediatek_gpio_set(chip, offset, value); + 
>> spin_unlock_irqrestore(&rg->lock, flags); + +       return 0; +} 
>> + +static int +mediatek_gpio_request(struct gpio_chip *chip, 
>> unsigned offset) +{ +       int gpio = chip->base + offset; + + 
>> return pinctrl_request_gpio(gpio); +} + +static void 
>> +mediatek_gpio_free(struct gpio_chip *chip, unsigned offset) +{
>> + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +}
>> + +static int +mediatek_gpio_bank_probe(struct platform_device
>> *pdev, struct device_node *bank) +{ +       const __be32 *id = 
>> of_get_property(bank, "reg", NULL); +       struct mtk_gc *rg = 
>> devm_kzalloc(&pdev->dev, + sizeof(struct mtk_gc), GFP_KERNEL); +
>> if (!rg || !id) + return -ENOMEM; + +
>> spin_lock_init(&rg->lock); + + rg->chip.dev = &pdev->dev; +
>> rg->chip.label = dev_name(&pdev->dev); +       rg->chip.of_node =
>> bank; + rg->chip.base = MTK_BANK_WIDTH * be32_to_cpu(*id);
> 
> Argh, no, I don't think so. The GPIO integer space is not something
> you can arbitrarily use like this. Any value that is not -1 is
> dangerous here.
> 
> If you add your banks one after the other, like you are seemingly 
> doing here, then you have a high probability of ending with 
> consecutive numbers. This cannot be guaranteed 100% though. That's 
> why we are trying to get away from the integer numberspace and to 
> use GPIO descriptors instead.

dou you have an example of a driver already doing so ?



> 
>> +       rg->chip.ngpio = MTK_BANK_WIDTH; + 
>> rg->chip.direction_input = mediatek_gpio_direction_input; + 
>> rg->chip.direction_output = mediatek_gpio_direction_output; + 
>> rg->chip.get = mediatek_gpio_get; +       rg->chip.set = 
>> mediatek_gpio_set; +       rg->chip.request = 
>> mediatek_gpio_request; +       rg->chip.free = 
>> mediatek_gpio_free; + +       /* set polarity to low for all 
>> gpios */ +       mtk_gpio_w32(rg, GPIO_REG_POL, 0); + + 
>> dev_info(&pdev->dev, "registering %d gpios\n", rg->chip.ngpio); +
>> +       return gpiochip_add(&rg->chip); +} + +static int 
>> +mediatek_gpio_probe(struct platform_device *pdev) +{ + struct
>> device_node *bank, *np = pdev->dev.of_node; +       struct 
>> resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); +
>> +       mtk_gc_membase = devm_ioremap_resource(&pdev->dev, res);
>> +       if (IS_ERR(mtk_gc_membase)) +               return 
>> PTR_ERR(mtk_gc_membase); + +       for_each_child_of_node(np, 
>> bank) +               if (of_device_is_compatible(bank, 
>> "mediatek,mt7621-gpio-bank")) + mediatek_gpio_bank_probe(pdev,
>> bank);
> 
> Here you may want to make sure the banks are parsed in the right 
> order if the order of their base number matters to you. Another 
> solution would be to just have a property with the number of
> banks, and use that instead of sub-nodes for each bank. This should
> be doable here since your banks do not have special properties of 
> their own, nor do they differ from each other.
> 
> 

that would be redundant or not "i will now list <4> banks", "here are
the 4 banks". that is what the count helpers are for if we need to be
aware of the number of properties prior to parsing the node.

i am not sure i have seen another instance of dts using a count index
for the following properties array/table/... do you have an example of
a driver doing so ?

	John
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux