Re: [PATCH v4 1/3] mfd: add support for Diolan DLN-2 devices

[Lee Jones <lee.jones@xxxxxxxxxx>]

On Wed, 17 Sep 2014, Johan Hovold wrote:
> On Tue, Sep 09, 2014 at 10:24:44PM +0300, Octavian Purdila wrote:
> > This patch implements the USB part of the Diolan USB-I2C/SPI/GPIO
> > Master Adapter DLN-2. Details about the device can be found here:
> > 
> > https://www.diolan.com/i2c/i2c_interface.html.
> > 
> > Information about the USB protocol can be found in the Programmer's
> > Reference Manual [1], see section 1.7.
> > 
> > Because the hardware has a single transmit endpoint and a single
> > receive endpoint the communication between the various DLN2 drivers
> > and the hardware will be muxed/demuxed by this driver.
> > 
> > Each DLN2 module will be identified by the handle field within the DLN2
> > message header. If a DLN2 module issues multiple commands in parallel
> > they will be identified by the echo counter field in the message header.
> > 
> > The DLN2 modules can use the dln2_transfer() function to issue a
> > command and wait for its response. They can also register a callback
> > that is going to be called when a specific event id is generated by
> > the device (e.g. GPIO interrupts). The device uses handle 0 for
> > sending events.
> > 
> > [1] https://www.diolan.com/downloads/dln-api-manual.pdf
> > 
> > Signed-off-by: Octavian Purdila <octavian.purdila@xxxxxxxxx>
> > ---
> >  drivers/mfd/Kconfig      |   9 +
> >  drivers/mfd/Makefile     |   1 +
> >  drivers/mfd/dln2.c       | 681 +++++++++++++++++++++++++++++++++++++++++++++++
> >  include/linux/mfd/dln2.h |  71 +++++
> >  4 files changed, 762 insertions(+)
> >  create mode 100644 drivers/mfd/dln2.c
> >  create mode 100644 include/linux/mfd/dln2.h

[...]

> Unless anyone suggests otherwise (e.g. to stick with auto id), I'll add
> a helper function for this and fix up those two drivers.

Appreciated.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html