Re: [RESEND PATCH] gpio: omap: Fix interrupt names

[Javier Martinez Canillas <javier@xxxxxxxxxxxx>]

Hello Linus,

On Fri, Sep 5, 2014 at 9:52 PM, Nishanth Menon <nm@xxxxxx> wrote:
> When viewing the /proc/interrupts, there is no information about which
> GPIO bank a specific gpio interrupt is hooked on to. This is more than a
> bit irritating as such information can esily be provided back to the
> user and at times, can be crucial for debug.
>
> So, instead of displaying something like:
> 31:     0       0  GPIO   0  palmas
> 32:     0       0  GPIO  27  mmc0
>
> Display the following with appropriate device name:
> 31:     0       0  4ae10000.gpio   0  palmas
> 32:     0       0  4805d000.gpio  27  mmc0
>
> This requires that we create irq_chip instance specific for each GPIO
> bank which is trivial to achieve.
>
> Signed-off-by: Nishanth Menon <nm@xxxxxx>
> Acked-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> Acked-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> Acked-by: Kevin Hilman <khilman@xxxxxxxxxx>
> ---
> Requested to be resend by Javier with linux-gpio maintainers in CC.
>
> Original V1 of the patch: https://patchwork.kernel.org/patch/4757891/
>
> Probably belongs to 3.18 kernel series at this point in time.
>

I've no other patches for the GPIO OMAP driver for 3.18, could you
please pick this patch?

Thanks a lot and best regards,
Javier
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html