Re: [PATCH 0/5] GPIO OMAP driver changes for v3.16

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 11, 2014 at 5:03 PM, Javier Martinez Canillas
<javier@xxxxxxxxxxxx> wrote:
> Hello Aaro,
>
> On Thu, Apr 10, 2014 at 11:22 PM, Aaro Koskinen <aaro.koskinen@xxxxxx> wrote:
>> Hi,
>>
>> On Thu, Apr 10, 2014 at 10:17:44PM +0200, Javier Martinez Canillas wrote:
>>> > The same happens also on Nokia 770:
>>> >
>>> > [    0.118896] genirq: Setting trigger mode 0 for irq 128 failed (gpio_irq_type+0x0/0x220)
>>>
>>> I don't have those errors when booting on my DM3730 IGEPv2 board but
>>> it seems that for some reason on omap1  __irq_set_trigger() complains
>>> when IRQ_TYPE_NONE is used as a default flag when calling
>>> gpiochip_irqchip_add()
>>>
>>> Could you please test the following patch and tell me if your board
>>> still works and makes the errors go away?
>>
>> Now it complains about mode 8...
>>
>> [    0.118835] genirq: Setting trigger mode 8 for irq 128 failed (gpio_irq_type
>> +0x0/0x220)
>>
>> A.
>>
>>> diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
>>> index 8cc9e91..5bc8aec 100644
>>> --- a/drivers/gpio/gpio-omap.c
>>> +++ b/drivers/gpio/gpio-omap.c
>>> @@ -1122,7 +1122,7 @@ static int omap_gpio_chip_init(struct gpio_bank *bank)
>>>
>>>         ret = gpiochip_irqchip_add(&bank->chip, &gpio_irq_chip,
>>>                                    irq_base, gpio_irq_handler,
>>> -                                  IRQ_TYPE_NONE);
>>> +                                  IRQ_TYPE_LEVEL_LOW);
>>>
>>>         if (ret) {
>>>                 dev_err(bank->dev, "Couldn't add irqchip to gpiochip
>>> %d\n", ret);
>>>
>>> Best regards,
>>> Javier
>
> Thanks for testing. Unfortunately I'm out of ideas on why that error
> could be shown and I don't have a way to further debug it without an
> omap1 board. I wonder why that pr_err() message is shown or why it is
> still working when an error happens.
>
> Maybe Linus or Santosh could give us a hint on what is happening here.

Isn't an edge IRQ more apropriate as default then?

The code contains this:

    if (!bank->regs->leveldetect0 &&
        (type & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH)))
        return -EINVAL;

Meaning sometimes the banks don't support level IRQs.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux