On Fri, Mar 07, 2025 at 04:21:58PM +0100, Mikulas Patocka wrote: > > I didn't say you were. I said the concept that dm-loop is based on > > is fundamentally flawed and that your benchmark setup does not > > reflect real world usage of loop devices. > > > Where are the bug reports about the loop device being slow and the > > analysis that indicates that it is unfixable? > > So, I did benchmarks on an enterprise nvme drive (SAMSUNG > MZPLJ1T6HBJR-00007). I stacked ext4/loop/ext4, xfs/loop/xfs (using losetup > --direct-io=on), ext4/dm-loop/ext4 and xfs/dm-loop/xfs. And loop is slow. > > synchronous I/O: > fio --direct=1 --bs=4k --runtime=10 --time_based --numjobs=12 --ioengine=psync --iodepth=1 --group_reporting=1 --filename=/mnt/test2/l -name=job --rw=rw > raw block device: > READ: bw=399MiB/s (418MB/s), 399MiB/s-399MiB/s (418MB/s-418MB/s), io=3985MiB (4179MB), run=10001-10001msec > WRITE: bw=399MiB/s (418MB/s), 399MiB/s-399MiB/s (418MB/s-418MB/s), io=3990MiB (4184MB), run=10001-10001msec > ext4/loop/ext4: > READ: bw=223MiB/s (234MB/s), 223MiB/s-223MiB/s (234MB/s-234MB/s), io=2232MiB (2341MB), run=10002-10002msec > WRITE: bw=223MiB/s (234MB/s), 223MiB/s-223MiB/s (234MB/s-234MB/s), io=2231MiB (2339MB), run=10002-10002msec > xfs/loop/xfs: > READ: bw=220MiB/s (230MB/s), 220MiB/s-220MiB/s (230MB/s-230MB/s), io=2196MiB (2303MB), run=10001-10001msec > WRITE: bw=219MiB/s (230MB/s), 219MiB/s-219MiB/s (230MB/s-230MB/s), io=2193MiB (2300MB), run=10001-10001msec > ext4/dm-loop/ext4: > READ: bw=338MiB/s (355MB/s), 338MiB/s-338MiB/s (355MB/s-355MB/s), io=3383MiB (3547MB), run=10002-10002msec > WRITE: bw=338MiB/s (355MB/s), 338MiB/s-338MiB/s (355MB/s-355MB/s), io=3385MiB (3549MB), run=10002-10002msec > xfs/dm-loop/xfs: > READ: bw=375MiB/s (393MB/s), 375MiB/s-375MiB/s (393MB/s-393MB/s), io=3752MiB (3934MB), run=10002-10002msec > WRITE: bw=376MiB/s (394MB/s), 376MiB/s-376MiB/s (394MB/s-394MB/s), io=3756MiB (3938MB), run=10002-10002msec > > asynchronous I/O: > fio --direct=1 --bs=4k --runtime=10 --time_based --numjobs=12 --ioengine=libaio --iodepth=16 --group_reporting=1 --filename=/mnt/test2/l -name=job --rw=rw > raw block device: > READ: bw=1246MiB/s (1306MB/s), 1246MiB/s-1246MiB/s (1306MB/s-1306MB/s), io=12.2GiB (13.1GB), run=10001-10001msec > WRITE: bw=1247MiB/s (1308MB/s), 1247MiB/s-1247MiB/s (1308MB/s-1308MB/s), io=12.2GiB (13.1GB), run=10001-10001msec BTW, raw device is supposed to be xfs or ext4 over raw block device, right? Otherwise, please provide test data for this case, then it becomes one fair comparison because there should be lock contention for FS write IOs on same file. Thanks, Ming
