Re: [RFC net-next 0/5] Suspend IRQs during preferred busy poll

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Martin Karsten wrote:
> On 2024-08-14 15:53, Samiullah Khawaja wrote:
> > On Tue, Aug 13, 2024 at 6:19 AM Martin Karsten <mkarsten@xxxxxxxxxxxx> wrote:
> >>
> >> On 2024-08-13 00:07, Stanislav Fomichev wrote:
> >>> On 08/12, Martin Karsten wrote:
> >>>> On 2024-08-12 21:54, Stanislav Fomichev wrote:
> >>>>> On 08/12, Martin Karsten wrote:
> >>>>>> On 2024-08-12 19:03, Stanislav Fomichev wrote:
> >>>>>>> On 08/12, Martin Karsten wrote:
> >>>>>>>> On 2024-08-12 16:19, Stanislav Fomichev wrote:
> >>>>>>>>> On 08/12, Joe Damato wrote:
> >>>>>>>>>> Greetings:
> 
> [snip]
> 
> >>>>>> Note that napi_suspend_irqs/napi_resume_irqs is needed even for the sake of
> >>>>>> an individual queue or application to make sure that IRQ suspension is
> >>>>>> enabled/disabled right away when the state of the system changes from busy
> >>>>>> to idle and back.
> >>>>>
> >>>>> Can we not handle everything in napi_busy_loop? If we can mark some napi
> >>>>> contexts as "explicitly polled by userspace with a larger defer timeout",
> >>>>> we should be able to do better compared to current NAPI_F_PREFER_BUSY_POLL
> >>>>> which is more like "this particular napi_poll call is user busy polling".
> >>>>
> >>>> Then either the application needs to be polling all the time (wasting cpu
> >>>> cycles) or latencies will be determined by the timeout.
> > But if I understand correctly, this means that if the application
> > thread that is supposed
> > to do napi busy polling gets busy doing work on the new data/events in
> > userspace, napi polling
> > will not be done until the suspend_timeout triggers? Do you dispatch
> > work to a separate worker
> > threads, in userspace, from the thread that is doing epoll_wait?
> 
> Yes, napi polling is suspended while the application is busy between 
> epoll_wait calls. That's where the benefits are coming from.
> 
> The consequences depend on the nature of the application and overall 
> preferences for the system. If there's a "dominant" application for a 
> number of queues and cores, the resulting latency for other background 
> applications using the same queues might not be a problem at all.
> 
> One other simple mitigation is limiting the number of events that each 
> epoll_wait call accepts. Note that this batch size also determines the 
> worst-case latency for the application in question, so there is a 
> natural incentive to keep it limited.
> 
> A more complex application design, like you suggest, might also be an 
> option.
> 
> >>>> Only when switching back and forth between polling and interrupts is it
> >>>> possible to get low latencies across a large spectrum of offered loads
> >>>> without burning cpu cycles at 100%.
> >>>
> >>> Ah, I see what you're saying, yes, you're right. In this case ignore my comment
> >>> about ep_suspend_napi_irqs/napi_resume_irqs.
> >>
> >> Thanks for probing and double-checking everything! Feedback is important
> >> for us to properly document our proposal.
> >>
> >>> Let's see how other people feel about per-dev irq_suspend_timeout. Properly
> >>> disabling napi during busy polling is super useful, but it would still
> >>> be nice to plumb irq_suspend_timeout via epoll context or have it set on
> >>> a per-napi basis imho.
> > I agree, this would allow each napi queue to tune itself based on
> > heuristics. But I think
> > doing it through epoll independent interface makes more sense as Stan
> > suggested earlier.
> 
> The question is whether to add a useful mechanism (one sysfs parameter 
> and a few lines of code) that is optional, but with demonstrable and 
> significant performance/efficiency improvements for an important class 
> of applications - or wait for an uncertain future?

The issue is that this one little change can never be removed, as it
becomes ABI.

Let's get the right API from the start.

Not sure that a global variable, or sysfs as API, is the right one.
 
> Note that adding our mechanism in no way precludes switching the control 
> parameters from per-device to per-napi as Joe alluded to earlier. In 
> fact, it increases the incentive for doing so.
> 
> After working on this for quite a while, I am skeptical that anything 
> fundamentally different could be done without re-architecting the entire 
> napi control flow.
> 
> Thanks,
> Martin
> 







[Index of Archives]     [Linux Ext4 Filesystem]     [Union Filesystem]     [Filesystem Testing]     [Ceph Users]     [Ecryptfs]     [NTFS 3]     [AutoFS]     [Kernel Newbies]     [Share Photos]     [Security]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux Cachefs]     [Reiser Filesystem]     [Linux RAID]     [NTFS 3]     [Samba]     [Device Mapper]     [CEPH Development]

  Powered by Linux