Changes since v2 [1]: * Fix source address increment in mcsafe_handle_tail() (Mika) * Extend the unit test to inject simulated write faults and validate that data is properly transferred. * Rename MCSAFE_DEBUG to MCSAFE_TEST [1]: https://lists.01.org/pipermail/linux-nvdimm/2018-May/015583.html --- Currently memcpy_mcsafe() is only deployed in the pmem driver when reading through a /dev/pmemX block device. However, a filesystem in dax mode mounted on a /dev/pmemX block device will bypass the block layer and the driver for reads. The filesystem-dax (fsdax) read case uses dax_direct_access() and copy_to_iter() to bypass the block layer. The result of the bypass is that the kernel treats machine checks during read as system fatal (reboot) when they could simply be flagged as an I/O error, similar to performing reads through the pmem driver. Prevent this fatal condition by deploying memcpy_mcsafe() in the fsdax read path. The main differences between this copy_to_user_mcsafe() and copy_user_generic_unrolled() are: * Typical tail/residue handling after a fault retries the copy byte-by-byte until the fault happens again. Re-triggering machine checks is potentially fatal so the implementation uses source alignment and poison alignment assumptions to avoid re-triggering machine checks. * SMAP coordination is handled external to the assembly with __uaccess_begin() and __uaccess_end(). * ITER_KVEC and ITER_BVEC can now end prematurely with an error. The new MCSAFE_TEST facility is proposed as a way to unit test the exception handling without requiring an ACPI EINJ capable platform. --- Dan Williams (9): x86, memcpy_mcsafe: remove loop unrolling x86, memcpy_mcsafe: add labels for write fault handling x86, memcpy_mcsafe: return bytes remaining x86, memcpy_mcsafe: add write-protection-fault handling x86, memcpy_mcsafe: define copy_to_iter_mcsafe() dax: introduce a ->copy_to_iter dax operation dax: report bytes remaining in dax_iomap_actor() pmem: switch to copy_to_iter_mcsafe() x86, nfit_test: unit test for memcpy_mcsafe() arch/x86/Kconfig | 1 arch/x86/Kconfig.debug | 3 + arch/x86/include/asm/mcsafe_test.h | 75 ++++++++++++++++++++++++ arch/x86/include/asm/string_64.h | 10 ++- arch/x86/include/asm/uaccess_64.h | 14 +++++ arch/x86/lib/memcpy_64.S | 112 +++++++++++++++++------------------- arch/x86/lib/usercopy_64.c | 21 +++++++ drivers/dax/super.c | 10 +++ drivers/md/dm-linear.c | 16 +++++ drivers/md/dm-log-writes.c | 15 +++++ drivers/md/dm-stripe.c | 21 +++++++ drivers/md/dm.c | 25 ++++++++ drivers/nvdimm/claim.c | 3 + drivers/nvdimm/pmem.c | 13 +++- drivers/s390/block/dcssblk.c | 7 ++ fs/dax.c | 21 ++++--- include/linux/dax.h | 5 ++ include/linux/device-mapper.h | 5 +- include/linux/string.h | 4 + include/linux/uio.h | 15 +++++ lib/iov_iter.c | 61 ++++++++++++++++++++ tools/testing/nvdimm/test/nfit.c | 104 +++++++++++++++++++++++++++++++++ 22 files changed, 482 insertions(+), 79 deletions(-) create mode 100644 arch/x86/include/asm/mcsafe_test.h
