Re: [PATCH 1/3] fpga: xilinx-spi: extract a common driver core

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jan 31, 2024 at 06:05:31PM -0500, Charles Perry wrote:
> Factor out the gpio handshaking (using PROGRAM_B, INIT_B and DONE)
> protocol in xilinx-core so that it can be reused for another driver.
> This commit does not change anything functionally to xilinx-spi.
> 
> xilinx-core expects drivers to provide two operations:
> 
>  * ->write(const char* buf, size_t count): write to the device
>  * ->write_one_dummy_byte(): write 0xFF to the device
> 
> Signed-off-by: Charles Perry <charles.perry@xxxxxxxxxxxxxxxxxxxx>
> ---
>  drivers/fpga/Kconfig       |   4 +
>  drivers/fpga/Makefile      |   1 +
>  drivers/fpga/xilinx-core.c | 210 +++++++++++++++++++++++++++++++++++++
>  drivers/fpga/xilinx-core.h |  27 +++++
>  drivers/fpga/xilinx-spi.c  | 204 +++--------------------------------
>  5 files changed, 257 insertions(+), 189 deletions(-)
>  create mode 100644 drivers/fpga/xilinx-core.c
>  create mode 100644 drivers/fpga/xilinx-core.h
> 
> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
> index 2f689ac4ba3a3..d27a1ebf40838 100644
> --- a/drivers/fpga/Kconfig
> +++ b/drivers/fpga/Kconfig
> @@ -64,9 +64,13 @@ config FPGA_MGR_STRATIX10_SOC
>  	help
>  	  FPGA manager driver support for the Intel Stratix10 SoC.
>  
> +config FPGA_MGR_XILINX_CORE
> +	tristate
> +
>  config FPGA_MGR_XILINX_SPI
>  	tristate "Xilinx Configuration over Slave Serial (SPI)"
>  	depends on SPI
> +	select FPGA_MGR_XILINX_CORE
>  	help
>  	  FPGA manager driver support for Xilinx FPGA configuration
>  	  over slave serial interface.
> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
> index 352a2612623e0..7ec795b6a5a70 100644
> --- a/drivers/fpga/Makefile
> +++ b/drivers/fpga/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_FPGA_MGR_SOCFPGA)		+= socfpga.o
>  obj-$(CONFIG_FPGA_MGR_SOCFPGA_A10)	+= socfpga-a10.o
>  obj-$(CONFIG_FPGA_MGR_STRATIX10_SOC)	+= stratix10-soc.o
>  obj-$(CONFIG_FPGA_MGR_TS73XX)		+= ts73xx-fpga.o
> +obj-$(CONFIG_FPGA_MGR_XILINX_CORE)	+= xilinx-core.o
>  obj-$(CONFIG_FPGA_MGR_XILINX_SPI)	+= xilinx-spi.o
>  obj-$(CONFIG_FPGA_MGR_ZYNQ_FPGA)	+= zynq-fpga.o
>  obj-$(CONFIG_FPGA_MGR_ZYNQMP_FPGA)	+= zynqmp-fpga.o
> diff --git a/drivers/fpga/xilinx-core.c b/drivers/fpga/xilinx-core.c
> new file mode 100644
> index 0000000000000..aff40e9394085
> --- /dev/null
> +++ b/drivers/fpga/xilinx-core.c
> @@ -0,0 +1,210 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Common parts of the Xilinx Spartan6 and 7 Series FPGA manager drivers.
> + *
> + * Copyright (C) 2017 DENX Software Engineering
> + *
> + * Anatolij Gustschin <agust@xxxxxxx>
> + */
> +
> +#include "xilinx-core.h"
> +
> +#include <linux/delay.h>
> +#include <linux/fpga/fpga-mgr.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/of.h>
> +
> +static int get_done_gpio(struct fpga_manager *mgr)
> +{
> +	struct xilinx_fpga_core *core = mgr->priv;
> +	int ret;
> +
> +	ret = gpiod_get_value(core->done);
> +

remove the line.

> +	if (ret < 0)
> +		dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret);
> +
> +	return ret;
> +}
> +
> +static enum fpga_mgr_states xilinx_core_state(struct fpga_manager *mgr)
> +{
> +	if (!get_done_gpio(mgr))
> +		return FPGA_MGR_STATE_RESET;
> +
> +	return FPGA_MGR_STATE_UNKNOWN;
> +}
> +
> +/**
> + * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
> + * a given delay if the pin is unavailable
> + *
> + * @mgr:        The FPGA manager object
> + * @value:      Value INIT_B to wait for (1 = asserted = low)
> + * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
> + *
> + * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
> + * too much time passed waiting for that. If no INIT_B GPIO is available
> + * then always return 0.
> + */
> +static int wait_for_init_b(struct fpga_manager *mgr, int value,
> +			   unsigned long alt_udelay)
> +{
> +	struct xilinx_fpga_core *core = mgr->priv;
> +	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
> +
> +	if (core->init_b) {
> +		while (time_before(jiffies, timeout)) {
> +			int ret = gpiod_get_value(core->init_b);
> +
> +			if (ret == value)
> +				return 0;
> +
> +			if (ret < 0) {
> +				dev_err(&mgr->dev,
> +					"Error reading INIT_B (%d)\n", ret);
> +				return ret;
> +			}
> +
> +			usleep_range(100, 400);
> +		}
> +
> +		dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n",
> +			value ? "assert" : "deassert");
> +		return -ETIMEDOUT;
> +	}
> +
> +	udelay(alt_udelay);
> +
> +	return 0;
> +}
> +
> +static int xilinx_core_write_init(struct fpga_manager *mgr,
> +				  struct fpga_image_info *info, const char *buf,
> +				  size_t count)
> +{
> +	struct xilinx_fpga_core *core = mgr->priv;
> +	int err;
> +
> +	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
> +		dev_err(&mgr->dev, "Partial reconfiguration not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	gpiod_set_value(core->prog_b, 1);
> +
> +	err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
> +	if (err) {
> +		gpiod_set_value(core->prog_b, 0);
> +		return err;
> +	}
> +
> +	gpiod_set_value(core->prog_b, 0);
> +
> +	err = wait_for_init_b(mgr, 0, 0);
> +	if (err)
> +		return err;
> +
> +	if (get_done_gpio(mgr)) {
> +		dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
> +		return -EIO;
> +	}
> +
> +	/* program latency */
> +	usleep_range(7500, 7600);
> +	return 0;
> +}
> +
> +static int xilinx_core_write(struct fpga_manager *mgr, const char *buf,
> +			     size_t count)
> +{
> +	struct xilinx_fpga_core *core = mgr->priv;
> +
> +	return core->write(core, buf, count);
> +}
> +
> +static int xilinx_core_write_complete(struct fpga_manager *mgr,
> +				      struct fpga_image_info *info)
> +{
> +	struct xilinx_fpga_core *core = mgr->priv;
> +	unsigned long timeout =
> +		jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
> +	bool expired = false;
> +	int done;
> +	int ret;
> +
> +	/*
> +	 * This loop is carefully written such that if the driver is
> +	 * scheduled out for more than 'timeout', we still check for DONE
> +	 * before giving up and we apply 8 extra CCLK cycles in all cases.
> +	 */
> +	while (!expired) {
> +		expired = time_after(jiffies, timeout);
> +
> +		done = get_done_gpio(mgr);
> +		if (done < 0)
> +			return done;
> +
> +		ret = core->write_one_dummy_byte(core);
> +		if (ret)
> +			return ret;
> +
> +		if (done)
> +			return 0;
> +	}
> +
> +	if (core->init_b) {
> +		ret = gpiod_get_value(core->init_b);
> +
> +		if (ret < 0) {
> +			dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
> +			return ret;
> +		}
> +
> +		dev_err(&mgr->dev,
> +			ret ? "CRC error or invalid device\n" :
> +			      "Missing sync word or incomplete bitstream\n");
> +	} else {
> +		dev_err(&mgr->dev, "Timeout after config data transfer\n");
> +	}
> +
> +	return -ETIMEDOUT;
> +}
> +
> +static const struct fpga_manager_ops xilinx_core_ops = {
> +	.state = xilinx_core_state,
> +	.write_init = xilinx_core_write_init,
> +	.write = xilinx_core_write,
> +	.write_complete = xilinx_core_write_complete,
> +};
> +
> +int xilinx_core_probe(struct xilinx_fpga_core *core, struct device *dev,
> +		      xilinx_write_func write,
> +		      xilinx_write_one_dummy_byte_func write_one_dummy_byte)

I prefer to move these parameters in xilinx_fpga_core structure. I don't
want the param list becomes longer and longer when we have more inputs.

> +{
> +	struct fpga_manager *mgr;
> +
> +	core->dev = dev;
> +	core->write = write;
> +	core->write_one_dummy_byte = write_one_dummy_byte;

Could the write() writes one dummy byte? Maybe one write callback is enough.

> +
> +	/* PROGRAM_B is active low */
> +	core->prog_b = devm_gpiod_get(dev, "prog_b", GPIOD_OUT_LOW);
> +	if (IS_ERR(core->prog_b))
> +		return dev_err_probe(dev, PTR_ERR(core->prog_b),
> +				     "Failed to get PROGRAM_B gpio\n");
> +
> +	core->init_b = devm_gpiod_get_optional(dev, "init-b", GPIOD_IN);
> +	if (IS_ERR(core->init_b))
> +		return dev_err_probe(dev, PTR_ERR(core->init_b),
> +				     "Failed to get INIT_B gpio\n");
> +
> +	core->done = devm_gpiod_get(dev, "done", GPIOD_IN);
> +	if (IS_ERR(core->done))
> +		return dev_err_probe(dev, PTR_ERR(core->done),
> +				     "Failed to get DONE gpio\n");
> +
> +	mgr = devm_fpga_mgr_register(dev, "Xilinx Slave Serial FPGA Manager",
> +				     &xilinx_core_ops, core);
> +	return PTR_ERR_OR_ZERO(mgr);
> +}
> diff --git a/drivers/fpga/xilinx-core.h b/drivers/fpga/xilinx-core.h
> new file mode 100644
> index 0000000000000..40e120945ba70
> --- /dev/null
> +++ b/drivers/fpga/xilinx-core.h
> @@ -0,0 +1,27 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +
> +#ifndef __XILINX_CORE_H
> +#define __XILINX_CORE_H
> +
> +#include <linux/device.h>
> +
> +struct xilinx_fpga_core;
> +
> +typedef int (*xilinx_write_func)(struct xilinx_fpga_core *core, const char *buf,
> +				 size_t count);
> +typedef int (*xilinx_write_one_dummy_byte_func)(struct xilinx_fpga_core *core);

No need to typedef.

Thanks,
Yilun

> +
> +struct xilinx_fpga_core {
> +	struct device *dev;
> +	xilinx_write_func write;
> +	xilinx_write_one_dummy_byte_func write_one_dummy_byte;
> +	struct gpio_desc *prog_b;
> +	struct gpio_desc *init_b;
> +	struct gpio_desc *done;
> +};
> +
> +int xilinx_core_probe(struct xilinx_fpga_core *core, struct device *dev,
> +		      xilinx_write_func write,
> +		      xilinx_write_one_dummy_byte_func write_one_dummy_byte);
> +
> +#endif /* __XILINX_CORE_H */
> diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
> index e1a227e7ff2ae..ec128dee97312 100644
> --- a/drivers/fpga/xilinx-spi.c
> +++ b/drivers/fpga/xilinx-spi.c
> @@ -10,127 +10,24 @@
>   * the slave serial configuration interface.
>   */
>  
> -#include <linux/delay.h>
> -#include <linux/device.h>
> -#include <linux/fpga/fpga-mgr.h>
> -#include <linux/gpio/consumer.h>
> +#include "xilinx-core.h"
> +
>  #include <linux/module.h>
>  #include <linux/mod_devicetable.h>
>  #include <linux/of.h>
>  #include <linux/spi/spi.h>
> -#include <linux/sizes.h>
>  
>  struct xilinx_spi_conf {
> +	struct xilinx_fpga_core core;
>  	struct spi_device *spi;
> -	struct gpio_desc *prog_b;
> -	struct gpio_desc *init_b;
> -	struct gpio_desc *done;
>  };
>  
> -static int get_done_gpio(struct fpga_manager *mgr)
> -{
> -	struct xilinx_spi_conf *conf = mgr->priv;
> -	int ret;
> -
> -	ret = gpiod_get_value(conf->done);
> -
> -	if (ret < 0)
> -		dev_err(&mgr->dev, "Error reading DONE (%d)\n", ret);
> -
> -	return ret;
> -}
> -
> -static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
> -{
> -	if (!get_done_gpio(mgr))
> -		return FPGA_MGR_STATE_RESET;
> -
> -	return FPGA_MGR_STATE_UNKNOWN;
> -}
> -
> -/**
> - * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
> - * a given delay if the pin is unavailable
> - *
> - * @mgr:        The FPGA manager object
> - * @value:      Value INIT_B to wait for (1 = asserted = low)
> - * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
> - *
> - * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
> - * too much time passed waiting for that. If no INIT_B GPIO is available
> - * then always return 0.
> - */
> -static int wait_for_init_b(struct fpga_manager *mgr, int value,
> -			   unsigned long alt_udelay)
> -{
> -	struct xilinx_spi_conf *conf = mgr->priv;
> -	unsigned long timeout = jiffies + msecs_to_jiffies(1000);
> -
> -	if (conf->init_b) {
> -		while (time_before(jiffies, timeout)) {
> -			int ret = gpiod_get_value(conf->init_b);
> -
> -			if (ret == value)
> -				return 0;
> -
> -			if (ret < 0) {
> -				dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
> -				return ret;
> -			}
> -
> -			usleep_range(100, 400);
> -		}
> -
> -		dev_err(&mgr->dev, "Timeout waiting for INIT_B to %s\n",
> -			value ? "assert" : "deassert");
> -		return -ETIMEDOUT;
> -	}
> -
> -	udelay(alt_udelay);
> -
> -	return 0;
> -}
> -
> -static int xilinx_spi_write_init(struct fpga_manager *mgr,
> -				 struct fpga_image_info *info,
> -				 const char *buf, size_t count)
> -{
> -	struct xilinx_spi_conf *conf = mgr->priv;
> -	int err;
> -
> -	if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
> -		dev_err(&mgr->dev, "Partial reconfiguration not supported\n");
> -		return -EINVAL;
> -	}
> -
> -	gpiod_set_value(conf->prog_b, 1);
> +#define to_xilinx_spi_conf(obj) container_of(obj, struct xilinx_spi_conf, core)
>  
> -	err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
> -	if (err) {
> -		gpiod_set_value(conf->prog_b, 0);
> -		return err;
> -	}
> -
> -	gpiod_set_value(conf->prog_b, 0);
> -
> -	err = wait_for_init_b(mgr, 0, 0);
> -	if (err)
> -		return err;
> -
> -	if (get_done_gpio(mgr)) {
> -		dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
> -		return -EIO;
> -	}
> -
> -	/* program latency */
> -	usleep_range(7500, 7600);
> -	return 0;
> -}
> -
> -static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
> +static int xilinx_spi_write(struct xilinx_fpga_core *core, const char *buf,
>  			    size_t count)
>  {
> -	struct xilinx_spi_conf *conf = mgr->priv;
> +	struct xilinx_spi_conf *conf = to_xilinx_spi_conf(core);
>  	const char *fw_data = buf;
>  	const char *fw_data_end = fw_data + count;
>  
> @@ -143,7 +40,7 @@ static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
>  
>  		ret = spi_write(conf->spi, fw_data, stride);
>  		if (ret) {
> -			dev_err(&mgr->dev, "SPI error in firmware write: %d\n",
> +			dev_err(core->dev, "SPI error in firmware write: %d\n",
>  				ret);
>  			return ret;
>  		}
> @@ -153,77 +50,22 @@ static int xilinx_spi_write(struct fpga_manager *mgr, const char *buf,
>  	return 0;
>  }
>  
> -static int xilinx_spi_apply_cclk_cycles(struct xilinx_spi_conf *conf)
> +static int xilinx_spi_apply_cclk_cycles(struct xilinx_fpga_core *core)
>  {
> -	struct spi_device *spi = conf->spi;
> +	struct xilinx_spi_conf *conf = to_xilinx_spi_conf(core);
>  	const u8 din_data[1] = { 0xff };
>  	int ret;
>  
>  	ret = spi_write(conf->spi, din_data, sizeof(din_data));
>  	if (ret)
> -		dev_err(&spi->dev, "applying CCLK cycles failed: %d\n", ret);
> +		dev_err(core->dev, "applying CCLK cycles failed: %d\n", ret);
>  
>  	return ret;
>  }
>  
> -static int xilinx_spi_write_complete(struct fpga_manager *mgr,
> -				     struct fpga_image_info *info)
> -{
> -	struct xilinx_spi_conf *conf = mgr->priv;
> -	unsigned long timeout = jiffies + usecs_to_jiffies(info->config_complete_timeout_us);
> -	bool expired = false;
> -	int done;
> -	int ret;
> -
> -	/*
> -	 * This loop is carefully written such that if the driver is
> -	 * scheduled out for more than 'timeout', we still check for DONE
> -	 * before giving up and we apply 8 extra CCLK cycles in all cases.
> -	 */
> -	while (!expired) {
> -		expired = time_after(jiffies, timeout);
> -
> -		done = get_done_gpio(mgr);
> -		if (done < 0)
> -			return done;
> -
> -		ret = xilinx_spi_apply_cclk_cycles(conf);
> -		if (ret)
> -			return ret;
> -
> -		if (done)
> -			return 0;
> -	}
> -
> -	if (conf->init_b) {
> -		ret = gpiod_get_value(conf->init_b);
> -
> -		if (ret < 0) {
> -			dev_err(&mgr->dev, "Error reading INIT_B (%d)\n", ret);
> -			return ret;
> -		}
> -
> -		dev_err(&mgr->dev,
> -			ret ? "CRC error or invalid device\n"
> -			: "Missing sync word or incomplete bitstream\n");
> -	} else {
> -		dev_err(&mgr->dev, "Timeout after config data transfer\n");
> -	}
> -
> -	return -ETIMEDOUT;
> -}
> -
> -static const struct fpga_manager_ops xilinx_spi_ops = {
> -	.state = xilinx_spi_state,
> -	.write_init = xilinx_spi_write_init,
> -	.write = xilinx_spi_write,
> -	.write_complete = xilinx_spi_write_complete,
> -};
> -
>  static int xilinx_spi_probe(struct spi_device *spi)
>  {
>  	struct xilinx_spi_conf *conf;
> -	struct fpga_manager *mgr;
>  
>  	conf = devm_kzalloc(&spi->dev, sizeof(*conf), GFP_KERNEL);
>  	if (!conf)
> @@ -231,31 +73,15 @@ static int xilinx_spi_probe(struct spi_device *spi)
>  
>  	conf->spi = spi;
>  
> -	/* PROGRAM_B is active low */
> -	conf->prog_b = devm_gpiod_get(&spi->dev, "prog_b", GPIOD_OUT_LOW);
> -	if (IS_ERR(conf->prog_b))
> -		return dev_err_probe(&spi->dev, PTR_ERR(conf->prog_b),
> -				     "Failed to get PROGRAM_B gpio\n");
> -
> -	conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
> -	if (IS_ERR(conf->init_b))
> -		return dev_err_probe(&spi->dev, PTR_ERR(conf->init_b),
> -				     "Failed to get INIT_B gpio\n");
> -
> -	conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
> -	if (IS_ERR(conf->done))
> -		return dev_err_probe(&spi->dev, PTR_ERR(conf->done),
> -				     "Failed to get DONE gpio\n");
> -
> -	mgr = devm_fpga_mgr_register(&spi->dev,
> -				     "Xilinx Slave Serial FPGA Manager",
> -				     &xilinx_spi_ops, conf);
> -	return PTR_ERR_OR_ZERO(mgr);
> +	return xilinx_core_probe(&conf->core, &spi->dev, xilinx_spi_write,
> +				 xilinx_spi_apply_cclk_cycles);
>  }
>  
>  #ifdef CONFIG_OF
>  static const struct of_device_id xlnx_spi_of_match[] = {
> -	{ .compatible = "xlnx,fpga-slave-serial", },
> +	{
> +		.compatible = "xlnx,fpga-slave-serial",
> +	},
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, xlnx_spi_of_match);
> -- 
> 2.43.0
> 
> 




[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux