Re: [PATCH 4/4] fpga: zynqmp: Add afi config driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2022-09-01 at 11:53:29 +0200, Marco Pagani wrote:
> Hi Nava,
> 
> On 2022-08-30 11:19, Manne, Nava kishore wrote:
> > Hi Yilun,
> > 
> > 	Please find my response inline.
> > 
> >> -----Original Message-----
> >> From: Xu Yilun <yilun.xu@xxxxxxxxx>
> >> Sent: Saturday, August 27, 2022 5:56 PM
> >> To: Manne, Nava kishore <nava.kishore.manne@xxxxxxx>
> >> Cc: git (AMD-Xilinx) <git@xxxxxxx>; robh+dt@xxxxxxxxxx;
> >> krzysztof.kozlowski+dt@xxxxxxxxxx; michal.simek@xxxxxxxxxx;
> >> mdf@xxxxxxxxxx; hao.wu@xxxxxxxxx; trix@xxxxxxxxxx;
> >> p.zabel@xxxxxxxxxxxxxx; gregkh@xxxxxxxxxxxxxxxxxxx;
> >> ronak.jain@xxxxxxxxxx; rajan.vaja@xxxxxxxxxx;
> >> abhyuday.godhasara@xxxxxxxxxx; piyush.mehta@xxxxxxxxxx;
> >> lakshmi.sai.krishna.potthuri@xxxxxxxxxx; harsha.harsha@xxxxxxxxxx;
> >> linus.walleij@xxxxxxxxxx; nava.manne@xxxxxxxxxx;
> >> devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> >> kernel@xxxxxxxxxxxxxxx; linux-fpga@xxxxxxxxxxxxxxx
> >> Subject: Re: [PATCH 4/4] fpga: zynqmp: Add afi config driver
> >>
> >> CAUTION: This message has originated from an External Source. Please use
> >> proper judgment and caution when opening attachments, clicking links, or
> >> responding to this email.
> >>
> >>
> >> On 2022-08-24 at 09:25:42 +0530, Nava kishore Manne wrote:
> >>> Add zynqmp AXI FIFO interface(AFI) config driver. This is useful for
> >>> the configuration of the PS-PL interface on Zynq US+ MPSoC platform.
> >>
> >> Please help illustrate how to use the device for FPGA reprogramming, why it
> >> should be implemented as an FPGA bridge.
> >>
> >> From the code I actually didn't see any operation that gates the fpga-region
> >> from other part of the machine.
> >>
> > 
> > The Zynq UltraScale MPSoC family consists of a system-on-chip (SoC) style integrated processing system (PS)
> > and a Programmable Logic (PL) unit, providing an extensible and flexible SoC solution on a single die. 
> > Xilinx Zynq US+ MPSoC connect the PS to the programmable logic (PL) through the AXI port. 
> > This AXI port helps to establish the data path between the PS and PL (Here AXI Interface act as a Gating between PS and PL)
> > and this AXI port configuration vary from design to design.  In-order to establish the proper communication path between
> > PS and PL (Full region),  the AXI port data path should be configured with proper values priories to load the full region.
> > 
> > Will update the description in v2.
> 
> Are you implementing your AFI driver as a Bridge because you want to
> change the configuration of the AXI HP interfaces exported by the PS
> every time you reconfigure the full fabric?
> 
> I understand the need to change the configuration of the PS-PL
> interface at each full reconfiguration to ensure that the parameters
> of the AXI ports exported by the PS (like the widths of data read
> and write channels) matches the configuration of the master AXI ports
> exported by the PL design. However, it seems to me that performing this
> configuration doesn't fit the role of the FPGA Bridge, whose sole
> responsibility should be gating the Region's interface during
> reconfiguration.
> 
> I think this need could be addressed by adding a new component to the
> FPGA subsystem called "FPGA Adapter". The Adapter will be an optional
> component associated with a Region like a Bridge. It will be responsible
> for changing the configuration of its Region's static interface
> (or PS/HPS/DRAM interface for the full FPGA) to match the interface
> exported by the specific reconfigurable module (or full static design).

I saw the Documentation/driver_api/interconnect.rst, but didn't look deep
into it. For this AFI case, it sets the bus width, is it OK to use it?

Thanks,
Yilun

> Moreover, besides bus-level properties like address/data width and
> protocol conversion, the Adapter could also be used to configure
> system-level properties. For instance, the designer may use it to change
> the memory access policy for the specific reconfigurable module if it
> uses bus mastering.
> 
> > 
> >>>
> >>> Signed-off-by: Nava kishore Manne <nava.kishore.manne@xxxxxxx>
> >>> ---
> >>>  MAINTAINERS               |   6 ++
> >>>  drivers/fpga/Kconfig      |  13 +++
> >>>  drivers/fpga/Makefile     |   1 +
> >>>  drivers/fpga/zynqmp-afi.c | 211
> >>> ++++++++++++++++++++++++++++++++++++++
> >>>  4 files changed, 231 insertions(+)
> >>>  create mode 100644 drivers/fpga/zynqmp-afi.c
> >>>
> >>> diff --git a/MAINTAINERS b/MAINTAINERS index
> >>> 20ffac651214..957e753e6406 100644
> >>> --- a/MAINTAINERS
> >>> +++ b/MAINTAINERS
> >>> @@ -8032,6 +8032,12 @@ F:     Documentation/fpga/
> >>>  F:   drivers/fpga/
> >>>  F:   include/linux/fpga/
> >>>
> >>> +FPGA ZYNQMP PS-PL BRIDGE DRIVER
> >>> +M:   Nava kishore Manne <nava.kishore.manne@xxxxxxx>
> >>> +S:   Supported
> >>> +F:   Documentation/devicetree/bindings/fpga/xlnx,zynqmp-afi-fpga.yaml
> >>> +F:   drivers/fpga/zynqmp-afi.c
> >>> +
> >>>  INTEL MAX10 BMC SECURE UPDATES
> >>>  M:   Russ Weight <russell.h.weight@xxxxxxxxx>
> >>>  L:   linux-fpga@xxxxxxxxxxxxxxx
> >>> diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig index
> >>> 6c416955da53..c08794d30fb5 100644
> >>> --- a/drivers/fpga/Kconfig
> >>> +++ b/drivers/fpga/Kconfig
> >>> @@ -130,6 +130,19 @@ config XILINX_PR_DECOUPLER
> >>>         reconfiguration, preventing the system deadlock that can
> >>>         occur if AXI transactions are interrupted by DFX.
> >>>
> >>> +config ZYNQMP_AFI
> >>> +     tristate "Xilinx ZYNQMP AFI support"
> >>> +     depends on FPGA_BRIDGE
> >>> +     help
> >>> +       Say Y to enable drivers to handle the PS-PL clocks configurations
> >>> +       and PS-PL Bus-width. Xilinx Zynq US+ MPSoC connect the PS to the
> >>> +       programmable logic (PL) through the AXI port. This AXI port helps
> >>> +       to establish the data path between the PS and PL.
> >>> +       In-order to establish the proper communication path between PS and
> >> PL,
> >>> +       the AXI port data path should be configured with the proper Bus-
> >> width
> >>> +       values and it will also handles the PS-PL reset signals to reset the
> >>> +       PL domain.
> >>
> >> Same concern, please describe its relationship to FPGA reprogramming.
> >>
> > 
> > Same as above.
> > Will update the description in v2.
> > 
> >>> +
> >>>  config FPGA_REGION
> >>>       tristate "FPGA Region"
> >>>       depends on FPGA_BRIDGE
> >>> diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile index
> >>> 42ae8b58abce..94cfe60972db 100644
> >>> --- a/drivers/fpga/Makefile
> >>> +++ b/drivers/fpga/Makefile
> >>> @@ -31,6 +31,7 @@ obj-$(CONFIG_FPGA_BRIDGE)           += fpga-bridge.o
> >>>  obj-$(CONFIG_SOCFPGA_FPGA_BRIDGE)    += altera-hps2fpga.o altera-
> >> fpga2sdram.o
> >>>  obj-$(CONFIG_ALTERA_FREEZE_BRIDGE)   += altera-freeze-bridge.o
> >>>  obj-$(CONFIG_XILINX_PR_DECOUPLER)    += xilinx-pr-decoupler.o
> >>> +obj-$(CONFIG_ZYNQMP_AFI)             += zynqmp-afi.o
> >>>
> >>>  # High Level Interfaces
> >>>  obj-$(CONFIG_FPGA_REGION)            += fpga-region.o
> >>> diff --git a/drivers/fpga/zynqmp-afi.c b/drivers/fpga/zynqmp-afi.c new
> >>> file mode 100644 index 000000000000..bc975d304039
> >>> --- /dev/null
> >>> +++ b/drivers/fpga/zynqmp-afi.c
> >>> @@ -0,0 +1,211 @@
> >>> +// SPDX-License-Identifier: GPL-2.0
> >>> +/*
> >>> + * Copyright (C) 2022 Xilinx, Inc.
> >>> + */
> >>> +
> >>> +#include <linux/err.h>
> >>> +#include <linux/firmware/xlnx-zynqmp.h> #include
> >>> +<linux/fpga/fpga-bridge.h> #include <linux/io.h> #include
> >>> +<linux/module.h> #include <linux/of.h> #include
> >>> +<linux/platform_device.h> #include <linux/reset.h> #include
> >>> +<linux/slab.h>
> >>> +
> >>> +/* Registers and special values for doing register-based operations */
> >>> +#define AFI_RDCHAN_CTRL_OFFSET       0x00
> >>> +#define AFI_WRCHAN_CTRL_OFFSET       0x14
> >>> +#define AFI_BUSWIDTH_MASK    BIT(0)
> >>> +
> >>> +/**
> >>> + * struct zynqmp_afi - AFI register description.
> >>> + * @dev: device that owns this.
> >>> + * @of_node: Device Tree overlay.
> >>> + * @resets: Pointer to the reset control for ps-pl resets.
> >>> + */
> >>> +struct zynqmp_afi {
> >>> +     struct device *dev;
> >>> +     struct device_node *of_node;
> >>> +     struct reset_control *resets;
> >>> +};
> >>> +
> >>> +/**
> >>> + * struct zynqmp_afi_configreg - AFI configuration registers info.
> >>> + * @reg:     Name of the AFI configuration register.
> >>> + * @id:              Register index value.
> >>> + */
> >>> +struct zynqmp_afi_configreg {
> >>> +     char *reg;
> >>> +     u32 id;
> >>> +};
> >>> +
> >>> +static struct zynqmp_afi_configreg afi_cfgreg[] = {
> >>> +     {.reg = "xlnx,afi-fm0-rd-bus-width",    .id = AFIFM0_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm1-rd-bus-width",    .id = AFIFM1_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm2-rd-bus-width",    .id = AFIFM2_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm3-rd-bus-width",    .id = AFIFM3_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm4-rd-bus-width",    .id = AFIFM4_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm5-rd-bus-width",    .id = AFIFM5_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm6-rd-bus-width",    .id = AFIFM6_RDCTRL},
> >>> +     {.reg = "xlnx,afi-fm0-wr-bus-width",    .id = AFIFM0_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fm1-wr-bus-width",    .id = AFIFM1_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fm2-wr-bus-width",    .id = AFIFM2_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fm3-wr-bus-width",    .id = AFIFM3_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fm4-wr-bus-width",    .id = AFIFM4_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fm5-wr-bus-width",    .id = AFIFM5_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fm6-wr-bus-width",    .id = AFIFM6_WRCTRL},
> >>> +     {.reg = "xlnx,afi-fs-ss0-bus-width",    .id = AFIFS},
> >>> +     {.reg = "xlnx,afi-fs-ss2-bus-width",    .id = AFIFS_SS2},
> >>> +     {}
> >>> +};
> >>> +
> >>> +static int zynqmp_afi_config(struct zynqmp_afi *afi_data) {
> >>> +     struct zynqmp_afi_configreg *cfgptr = afi_cfgreg;
> >>> +     struct device_node *np = afi_data->of_node;
> >>> +     u32 afi_ss0_val, afi_ss1_val, bus_width;
> >>> +     int ret;
> >>> +
> >>> +     while (cfgptr->reg) {
> >>> +             ret = of_property_read_u32(np, cfgptr->reg, &bus_width);
> >>> +             if (!ret) {
> >>> +                     if (cfgptr->id == AFIFS_SS2) {
> >>> +                             if (bus_width == 32)
> >>> +                                     ret = zynqmp_pm_afi(AFIFS_SS2,
> >>> +                                                         AFIFS_SS_BUS_WIDTH_32_CONFIG_VAL);
> >>> +                             else if (bus_width == 64)
> >>> +                                     ret = zynqmp_pm_afi(AFIFS_SS2,
> >>> +
> >> AFIFS_SS0_SS2_BUS_WIDTH_64_CONFIG_VAL);
> >>> +                             else if (bus_width == 128)
> >>> +                                     ret = zynqmp_pm_afi(AFIFS_SS2,
> >>> +
> >> AFIFS_SS0_SS2_BUS_WIDTH_128_CONFIG_VAL);
> >>> +                             else
> >>> +                                     return -EINVAL;
> >>> +                     } else if (cfgptr->id == AFIFS) {
> >>> +                             if (bus_width == 32)
> >>> +                                     afi_ss0_val = AFIFS_SS_BUS_WIDTH_32_CONFIG_VAL;
> >>> +                             else if (bus_width == 64)
> >>> +                                     afi_ss0_val =
> >> AFIFS_SS0_SS2_BUS_WIDTH_64_CONFIG_VAL;
> >>> +                             else if (bus_width == 128)
> >>> +                                     afi_ss0_val =
> >> AFIFS_SS0_SS2_BUS_WIDTH_128_CONFIG_VAL;
> >>> +                             else
> >>> +                                     return -EINVAL;
> >>> +
> >>> +                             ret = of_property_read_u32(np, "xlnx,afi-fs-ss1-bus-
> >> width",
> >>> +                                                        &bus_width);
> >>> +                             if (!ret) {
> >>> +                                     if (bus_width == 32)
> >>> +                                             afi_ss1_val =
> >> AFIFS_SS_BUS_WIDTH_32_CONFIG_VAL;
> >>> +                                     else if (bus_width == 64)
> >>> +                                             afi_ss1_val =
> >> AFIFS_SS1_BUS_WIDTH_64_CONFIG_VAL;
> >>> +                                     else if (bus_width == 128)
> >>> +                                             afi_ss1_val =
> >> AFIFS_SS1_BUS_WIDTH_128_CONFIG_VAL;
> >>> +                                     else
> >>> +                                             return -EINVAL;
> >>> +
> >>> +                                     ret = zynqmp_pm_afi(AFIFS, afi_ss1_val |
> >> afi_ss0_val);
> >>> +                             }
> >>> +                     } else {
> >>> +                             if (bus_width == 32)
> >>> +                                     ret = zynqmp_pm_afi(cfgptr->id,
> >>> +                                                         AFIFM_BUS_WIDTH_32_CONFIG_VAL);
> >>> +                             else if (bus_width == 64)
> >>> +                                     ret = zynqmp_pm_afi(cfgptr->id,
> >>> +                                                         AFIFM_BUS_WIDTH_64_CONFIG_VAL);
> >>> +                             else if (bus_width == 128)
> >>> +                                     ret = zynqmp_pm_afi(cfgptr->id,
> >>> +                                                         AFIFM_BUS_WIDTH_128_CONFIG_VAL);
> >>> +                             else
> >>> +                                     return -EINVAL;
> >>> +                     }
> >>> +             }
> >>> +             cfgptr++;
> >>> +     }
> >>> +
> >>> +     return 0;
> >>> +}
> >>> +
> >>> +static int zynqmp_afi_enable_set(struct fpga_bridge *bridge, bool
> >>> +enable) {
> >>> +     struct device_node *overlay = bridge->info->overlay;
> >>> +     struct zynqmp_afi *priv = bridge->priv;
> >>> +     int ret = 0;
> >>> +
> >>> +     if (enable) {
> >>> +             reset_control_reset(priv->resets);
> >>> +             return 0;
> >>> +     }
> >>> +
> >>> +     of_node_get(overlay);
> >>> +     priv->of_node =
> >>> +     of_find_node_with_property(overlay,
> >>> +                                "xlnx,afi-fm0-rd-bus-width");
> >>
> >> I'm a little confused here. The fpga_image_info.overlay is for fpga-region, but
> >> from your binding doc this property is for this afi device. You want to add
> >> another overlay targeting afi dev node during reprograming?
> >>
> > 
> > Yes, it uses Overlay's(overlay targeting afi dev node). As I said above for design-to-design AFI configs
> > relevant to the full region may change and these configs must be set prior to program the full region
> > once this overlay integrated to the live tree the existing afi config values will be replace with the new one's
> > 
> >>> +     if (priv->of_node)
> >>> +             ret = zynqmp_afi_config(priv);
> >>> +     of_node_put(priv->of_node);
> >>> +
> >>> +     return ret;
> >>> +}
> >>> +
> >>> +static const struct fpga_bridge_ops zynqmp_afi_br_ops = {
> >>> +     .enable_set = zynqmp_afi_enable_set, };
> >>> +
> >>> +static const struct of_device_id zynqmp_afi_of_match[] = {
> >>> +     { .compatible =  "xlnx,zynqmp-afi-fpga" },
> >>> +     { },
> >>> +};
> >>> +MODULE_DEVICE_TABLE(of, zynqmp_afi_of_match);
> >>> +
> >>> +static int zynqmp_afi_probe(struct platform_device *pdev) {
> >>> +     struct device *dev = &pdev->dev;
> >>> +     struct zynqmp_afi *priv;
> >>> +     struct fpga_bridge *br;
> >>> +
> >>> +     priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> >>> +     if (!priv)
> >>> +             return -ENOMEM;
> >>> +
> >>> +     priv->dev = dev;
> >>> +
> >>> +     priv->resets =
> >> devm_reset_control_array_get_optional_exclusive(&pdev->dev);
> >>> +     if (IS_ERR(priv->resets))
> >>> +             return PTR_ERR(priv->resets);
> >>> +
> >>> +     br = fpga_bridge_register(dev, "Xilinx ZynqMP AFI",
> >>> +                               &zynqmp_afi_br_ops, priv);
> >>> +     if (IS_ERR(br)) {
> >>> +             dev_err(dev, "unable to register Xilinx ZynqMP AFI");
> >>
> >> Need a "\n" at the end?
> >>
> > 
> > Will fix.
> > 
> > Regards,
> > Navakishore.
> > 
> 
> Thanks,
> Marco
> 



[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux