> Subject: [PATCH v1 2/7] fpga: dfl: check feature type before parse irq info
>
> From: Tianfei Zhang <tianfei.zhang@xxxxxxxxx>
>
> The feature ID of "Port User Interrupt" and the
> "PMCI Subsystem" are identical, 0x12, but one is for FME,
> other is for Port. It should check the feature type While
> parsing the irq info in parse_feature_irqs().
>
> Signed-off-by: Tianfei Zhang <tianfei.zhang@xxxxxxxxx>
> ---
> drivers/fpga/dfl.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
> index 599bb21d86af..26f8cf890700 100644
> --- a/drivers/fpga/dfl.c
> +++ b/drivers/fpga/dfl.c
> @@ -940,9 +940,14 @@ static int parse_feature_irqs(struct
> build_feature_devs_info *binfo,
> {
> void __iomem *base = binfo->ioaddr + ofst;
> unsigned int i, ibase, inr = 0;
> + enum dfl_id_type type;
> int virq;
> u64 v;
>
> + type = feature_dev_id_type(binfo->feature_dev);
> + if (type >= DFL_ID_MAX)
> + return -EINVAL;
> +
You don't have to check this, it doesn't allow creating feature dev with type >= DFL_ID_MAX.
> /*
> * Ideally DFL framework should only read info from DFL header, but
> * current version DFL only provides mmio resources information for
> @@ -959,16 +964,22 @@ static int parse_feature_irqs(struct
> build_feature_devs_info *binfo,
> */
> switch (fid) {
> case PORT_FEATURE_ID_UINT:
> + if (type != PORT_ID)
> + break;
> v = readq(base + PORT_UINT_CAP);
> ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
> inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
> break;
> case PORT_FEATURE_ID_ERROR:
> + if (type != PORT_ID)
> + break;
> v = readq(base + PORT_ERROR_CAP);
> ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
> inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
> break;
> case FME_FEATURE_ID_GLOBAL_ERR:
> + if (type != FME_ID)
> + break;
> v = readq(base + FME_ERROR_CAP);
> ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
> inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
> --
> 2.17.1
