On 08/09/15 22:19, Olliver Schinagl wrote:
> Having a few ssd1309 128x64 OLED displays laying around, I added support for it to the existing 1307fb driver. While doing this I noticed the headers where out of order so I fixed those as well.
>
> For this specific display, the following can be used in a i2c node for example.
>
> ssd1309: oled@3c {
> compatible = "solomon,ssd1309fb-i2c";
> pinctrl-names = "default";
> pinctrl-0 = <&oled_pins>;
> reg = <0x3c>;
> reset-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>;
> solomon,width = <128>;
> solomon,height = <64>;
> solomon,com-invdir;
> solomon,page-offset = <0>;
> solomon,prechargep1 = <2>;
> solomon,prechargep2 = <8>;
> };
>
> Olliver Schinagl (2):
> fbdev: ssd1307fb: alphabetize headers
> fbdev: ssd1307fb: add ssd1309 support
>
> .../devicetree/bindings/video/ssd1307fb.txt | 3 ++-
> drivers/video/fbdev/ssd1307fb.c | 21 ++++++++++++++++-----
> 2 files changed, 18 insertions(+), 6 deletions(-)
>
Thanks, queued for 4.4.
Tomi
Attachment:
signature.asc
Description: OpenPGP digital signature
