Having a few ssd1309 128x64 OLED displays laying around, I added support for it to the existing 1307fb driver. While doing this I noticed the headers where out of order so I fixed those as well.
For this specific display, the following can be used in a i2c node for example.
ssd1309: oled@3c {
compatible = "solomon,ssd1309fb-i2c";
pinctrl-names = "default";
pinctrl-0 = <&oled_pins>;
reg = <0x3c>;
reset-gpios = <&pio 8 13 GPIO_ACTIVE_HIGH>;
solomon,width = <128>;
solomon,height = <64>;
solomon,com-invdir;
solomon,page-offset = <0>;
solomon,prechargep1 = <2>;
solomon,prechargep2 = <8>;
};
Olliver Schinagl (2):
fbdev: ssd1307fb: alphabetize headers
fbdev: ssd1307fb: add ssd1309 support
.../devicetree/bindings/video/ssd1307fb.txt | 3 ++-
drivers/video/fbdev/ssd1307fb.c | 21 ++++++++++++++++-----
2 files changed, 18 insertions(+), 6 deletions(-)
--
2.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
