RE: [PATCH v2] da8xx-fb: allow frame to complete after disabling LCDC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jul 24, 2012 at 12:47:02, Manjunathappa, Prakash wrote:
> Hi Sriram,
> 
> On Tue, Jul 24, 2012 at 10:11:55, Madhvapathi Sriram wrote:
> > On Tue, Jul 24, 2012 at 9:39 AM, Manjunathappa, Prakash
> > <prakash.pm@xxxxxx> wrote:
> [...]
> > >  /* Disable the Raster Engine of the LCD Controller */
> > > -static inline void lcd_disable_raster(void)
> > > +static inline void lcd_disable_raster(bool wait_for_frame_done)
> > >  {
> > >         u32 reg;
> > > +       u32 loop_cnt = 0;
> > > +       u32 stat;
> > > +       u32 i = 0;
> > > +
> > > +       /* 50 milli seconds should be sufficient for a frame to complete
> > > */
> > > +       if (wait_for_frame_done)
> > > +               loop_cnt = 50;
> > >
> > >         reg = lcdc_read(LCD_RASTER_CTRL_REG);
> > >         if (reg & LCD_RASTER_ENABLE)
> > >                 lcdc_write(reg & ~LCD_RASTER_ENABLE, LCD_RASTER_CTRL_REG);
> > > +
> > > +       /* Wait for the current frame to complete */
> > > +       do {
> > > +               if (lcd_revision == LCD_VERSION_1)
> > > +                       stat = lcdc_read(LCD_STAT_REG);
> > > +               else
> > > +                       stat = lcdc_read(LCD_RAW_STAT_REG);
> > > +               mdelay(1);
> > > +       } while (!(stat & LCD_FRAME_DONE) && (i++ < loop_cnt));
> > 
> > Are you sure it should be do while? You call it from interrupt handler
> > too (sync lost handling). In that case mdelay() from interrupt
> > context..not a good idea I feel.
> > 
> 
> Ok. I will change it as below:
> 
> while (1) {
>                if (lcd_revision == LCD_VERSION_1)
>                        stat = lcdc_read(LCD_STAT_REG);
>                else
>                        stat = lcdc_read(LCD_RAW_STAT_REG);
>                if((stat & LCD_FRAME_DONE) || (i++ > loop_cnt))

s/i++/++i

Thanks,
Prakash

>                     break;
>                mdelay(1);
> }
> 
> > > +
> > > +       if (lcd_revision == LCD_VERSION_1)
> > > +               lcdc_write(stat, LCD_STAT_REG);
> > > +       else
> > > +               lcdc_write(stat, LCD_MASKED_STAT_REG);
> > > +
> > > +       if ((loop_cnt != 0) && (i >= loop_cnt)) {
> > > +               pr_err("LCD Controller timed out\n");
> > > +               return;
> > 
> > return may not be necessary?
> > 
> 
> Agree, I will remove it.
> 
> Thanks,
> Prakash
> 
> > > +       }
> > >  }
> 
> [...] 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html


[Index of Archives]     [Video for Linux]     [Linux USB Devel]     [Linux Audio Users]     [Yosemite Tourism]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux