LCD blink is observed during suspend/resume and blank/unblank
operations as backlight is ON during LCDC disable and enable.
So make sure to turn OFF backlight before disabling and turn
it ON after enabling.
Signed-off-by: Manjunathappa, Prakash <prakash.pm@xxxxxx>
---
drivers/video/da8xx-fb.c | 9 +++++----
1 files changed, 5 insertions(+), 4 deletions(-)
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/da8xx-fb.c
index 0fb4d7d..1a569ae 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -1056,10 +1056,10 @@ static int cfb_blank(int blank, struct fb_info *info)
par->blank = blank;
switch (blank) {
case FB_BLANK_UNBLANK:
+ lcd_enable_raster();
+
if (par->panel_power_ctrl)
par->panel_power_ctrl(1);
-
- lcd_enable_raster();
break;
case FB_BLANK_POWERDOWN:
if (par->panel_power_ctrl)
@@ -1417,11 +1417,12 @@ static int fb_resume(struct platform_device *dev)
struct da8xx_fb_par *par = info->par;
console_lock();
+ clk_enable(par->lcdc_clk);
+ lcd_enable_raster();
+
if (par->panel_power_ctrl)
par->panel_power_ctrl(1);
- clk_enable(par->lcdc_clk);
- lcd_enable_raster();
fb_set_suspend(info, 0);
console_unlock();
--
1.7.1
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
