Use the newly added fields in omap_video_timings(hsync, vsync and data_enable
logic levels and data, hsync and vsync latching related info) to
configure/retrieve corresponding sync flags in fb_var_screeninfo and
fb_videomode.
Out of the new fields, hsync_level and vsync_level can be mapped to the fb sync
flags FB_SYNC_HOR_HIGH_ACT and FB_SYNC_VERT_HIGH_ACT.
When converting fb mode to omap_video_timings, the fields which don't have an
equivalent parameter in fb are set to the default values.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/omapfb/omapfb-main.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/omap2/omapfb/omapfb-main.c
index 1dd8f2c..7c99725 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/omap2/omapfb/omapfb-main.c
@@ -733,6 +733,10 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
var->lower_margin = timings.vfp;
var->hsync_len = timings.hsw;
var->vsync_len = timings.vsw;
+ var->sync |= timings.hsync_level == OMAPDSS_SIG_ACTIVE_HIGH ?
+ FB_SYNC_HOR_HIGH_ACT : 0;
+ var->sync |= timings.vsync_level == OMAPDSS_SIG_ACTIVE_HIGH ?
+ FB_SYNC_VERT_HIGH_ACT : 0;
} else {
var->pixclock = 0;
var->left_margin = 0;
@@ -741,11 +745,11 @@ int check_fb_var(struct fb_info *fbi, struct fb_var_screeninfo *var)
var->lower_margin = 0;
var->hsync_len = 0;
var->vsync_len = 0;
+ var->sync = 0;
}
/* TODO: get these from panel->config */
var->vmode = FB_VMODE_NONINTERLACED;
- var->sync = 0;
return 0;
}
@@ -2053,6 +2057,15 @@ static int omapfb_mode_to_timings(const char *mode_str,
timings->vsw = var->vsync_len;
timings->x_res = var->xres;
timings->y_res = var->yres;
+ timings->hsync_level = var->sync & FB_SYNC_HOR_HIGH_ACT ?
+ OMAPDSS_SIG_ACTIVE_HIGH :
+ OMAPDSS_SIG_ACTIVE_LOW;
+ timings->vsync_level = var->sync & FB_SYNC_VERT_HIGH_ACT ?
+ OMAPDSS_SIG_ACTIVE_HIGH :
+ OMAPDSS_SIG_ACTIVE_LOW;
+ timings->pclk_edge = OMAPDSS_SIG_ACTIVE_HIGH;
+ timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ timings->hsync_vsync_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
switch (var->bits_per_pixel) {
case 16:
@@ -2187,6 +2200,15 @@ static void fb_videomode_to_omap_timings(struct fb_videomode *m,
t->vsw = m->vsync_len;
t->vfp = m->lower_margin;
t->vbp = m->upper_margin;
+ t->hsync_level = m->sync & FB_SYNC_HOR_HIGH_ACT ?
+ OMAPDSS_SIG_ACTIVE_HIGH :
+ OMAPDSS_SIG_ACTIVE_LOW;
+ t->vsync_level = m->sync & FB_SYNC_VERT_HIGH_ACT ?
+ OMAPDSS_SIG_ACTIVE_HIGH :
+ OMAPDSS_SIG_ACTIVE_LOW;
+ t->pclk_edge = OMAPDSS_SIG_ACTIVE_HIGH;
+ t->de_level = OMAPDSS_SIG_ACTIVE_HIGH;
+ t->hsync_vsync_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES;
}
static int omapfb_find_best_mode(struct omap_dss_device *display,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
