dispc_mgr_set_pol_freq() configures the fields in the register DISPC_POL_FREQo.
All these fields have been moved to omap_video_timings struct, and are now
programmed in dispc_mgr_set_lcd_timings(). These will be configured when timings
are applied via dss_mgr_set_timings().
Remove dispc_mgr_set_pol_freq() and it's calls from the interface drivers.
Signed-off-by: Archit Taneja <archit@xxxxxx>
---
drivers/video/omap2/dss/dispc.c | 29 -----------------------------
drivers/video/omap2/dss/dpi.c | 2 --
drivers/video/omap2/dss/dss.h | 2 --
drivers/video/omap2/dss/sdi.c | 2 --
4 files changed, 35 deletions(-)
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c
index 184d37b..9b22563 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/omap2/dss/dispc.c
@@ -3113,35 +3113,6 @@ static void dispc_dump_regs(struct seq_file *s)
#undef DUMPREG
}
-static void _dispc_mgr_set_pol_freq(enum omap_channel channel, bool onoff,
- bool rf, bool ieo, bool ipc, bool ihs, bool ivs)
-{
- u32 l = 0;
-
- DSSDBG("onoff %d rf %d ieo %d ipc %d ihs %d ivs %d\n",
- onoff, rf, ieo, ipc, ihs, ivs);
-
- l |= FLD_VAL(onoff, 17, 17);
- l |= FLD_VAL(rf, 16, 16);
- l |= FLD_VAL(ieo, 15, 15);
- l |= FLD_VAL(ipc, 14, 14);
- l |= FLD_VAL(ihs, 13, 13);
- l |= FLD_VAL(ivs, 12, 12);
-
- dispc_write_reg(DISPC_POL_FREQ(channel), l);
-}
-
-void dispc_mgr_set_pol_freq(enum omap_channel channel,
- enum omap_panel_config config)
-{
- _dispc_mgr_set_pol_freq(channel, (config & OMAP_DSS_LCD_ONOFF) != 0,
- (config & OMAP_DSS_LCD_RF) != 0,
- (config & OMAP_DSS_LCD_IEO) != 0,
- (config & OMAP_DSS_LCD_IPC) != 0,
- (config & OMAP_DSS_LCD_IHS) != 0,
- (config & OMAP_DSS_LCD_IVS) != 0);
-}
-
/* with fck as input clock rate, find dispc dividers that produce req_pck */
void dispc_find_clk_divs(unsigned long req_pck, unsigned long fck,
struct dispc_clock_info *cinfo)
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/omap2/dss/dpi.c
index d8cc440..046a6fb 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/omap2/dss/dpi.c
@@ -148,8 +148,6 @@ static int dpi_set_mode(struct omap_dss_device *dssdev)
unsigned long pck;
int r = 0;
- dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config);
-
if (dpi_use_dsi_pll(dssdev))
r = dpi_set_dsi_clk(dssdev, t->pixel_clock * 1000, &fck,
&lck_div, &pck_div);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/omap2/dss/dss.h
index d64f894..3d23a23 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/omap2/dss/dss.h
@@ -414,8 +414,6 @@ void dispc_mgr_set_tft_data_lines(enum omap_channel channel, u8 data_lines);
void dispc_mgr_set_lcd_type_tft(enum omap_channel channel);
void dispc_mgr_set_timings(enum omap_channel channel,
struct omap_video_timings *timings);
-void dispc_mgr_set_pol_freq(enum omap_channel channel,
- enum omap_panel_config config);
unsigned long dispc_mgr_lclk_rate(enum omap_channel channel);
unsigned long dispc_mgr_pclk_rate(enum omap_channel channel);
unsigned long dispc_core_clk_rate(void);
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/omap2/dss/sdi.c
index 9330410..264efd5 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/omap2/dss/sdi.c
@@ -82,8 +82,6 @@ int omapdss_sdi_display_enable(struct omap_dss_device *dssdev)
dssdev->panel.timings.hsync_vsync_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE;
- dispc_mgr_set_pol_freq(dssdev->manager->id, dssdev->panel.config);
-
r = dss_calc_clock_div(t->pixel_clock * 1000, &dss_cinfo, &dispc_cinfo);
if (r)
goto err_calc_clock_div;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
