On Mon, May 2, 2011 at 1:30 PM, Timur Tabi <timur@xxxxxxxxxxxxx> wrote: > I'm using a Freescale P1022DS (PowerPC e500 core) system, which has a built-in > video controller. I have a framebuffer driver that works fine, and if I add > "video=fslfb:1280x1024-32@60,monitor=0 console=tty0" to the command-line, then > *most* of the kernel boot log appears on the serial port and the video display. > > However, the login prompt is always on the serial port. This happens even if I > delete the "console=ttyS0,115200" from the command-line. I presume this is > because the "linux,stdout-path" property in the device tree always points to a > serial port node. > > So my question is: what do I need to do get the login prompt on the video > console? That is, stdout goes to /dev/fb0 but stdin is still from /dev/ttyS0. > I presume I need to direct "linux,stdout-path" to the fslfb node in the device > tree, but there doesn't appear to be support for "linux,stdin-path". Look in /etc/inittab. That's usually where the login gettys are specified. g. > > -- > Timur Tabi > Linux kernel developer at Freescale > > _______________________________________________ > devicetree-discuss mailing list > devicetree-discuss@xxxxxxxxxxxxxxxx > https://lists.ozlabs.org/listinfo/devicetree-discuss > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
